By October 11, 2018 0 Comments Read More →

Advanced Process Control Instrumentation

Advanced Process Control Instrumentation

Hotel Ibis, Yogyakarta | 15 – 17 Oktober 2018 | Rp 6.900.000,- per peserta
Hotel Ibis, Yogyakarta | 22 – 24 Oktober 2018 | Rp 6.900.000,- per peserta
Hotel Ibis, Yogyakarta | 29 – 31 Oktober 2018 | Rp 6.900.000,- per peserta
Hotel Ibis, Yogyakarta | 05 – 07 November 2018 | Rp 6.900.000,- per peserta

Jadwal Training 2018 Selanjutnya …

 

 

Latar Belakang Training Advanced Process Control Instrumentation

Pengendalian proses dalam industri dilakukan untuk menjamin bahwa proses yang dilakukan sesuai dengan yang diinginkan, sehingga kualitas yang didapatpun dapat dijamin. Pada pengendalia tersebut, data merupakan komponen sangat penting dalam pengendalian kualitas proses maupun bahan pertimbangan utama dalam pengambilan keputusan. Keakuratan komponen-komponen tersebut akan menentukan jaminan kualitas produk yang dihasilkan. Lebih lanjut, kesalahan dalam satu bagian proses pengambilan maupun pengolahan data dapat berakibat dapat fatal dalam industry. Hal tersebut terjadi karena pengambilan keputusan pada sistem kendalinya menjadi tidak akurat.

Kesadaran akan pentingnya akurasi pengukuran menuntut pemahaman akan karakteristik instrumentasi yang digunakannya, termasuk di dalamnya fasilitas komunikasi yang tersedia sebagai sarana antar muka (interface) dengan perlatan lainnya.

Mengingat pentingnya hal tersebut pelatihan diharapkan akan sangat membantu memberikan wawasan kepada para peserta mengenai  instrumentasi agar dapat bermanfaat  pada aktivitas di industri.

 

Keluaran Training Advanced Process Control Instrumentation

Peserta akan memahami:

  • berbagai jenis alat ukur di lapangan
  • Jenis-jenis kesalahan pada instrumen pengukuran
  • kesalahan yang muncul akibat sifat material sensor
  • prinsip kerja alat-alat ukur dari berbagai jenis sensor
  • akuisisi data: ADC, DAC, dll
  • data komunikasi: RS232, RS422, RS485, dsb.
  • pengendali proses: variable speed controller, PLC

 

Materi Training Advanced Process Control Instrumentation

  • Jenis-jenis alat ukur dalam proses produksi dan cara kerjanya
    • Termal
    • Aliran
    • Tekanan
    • Level
  • Dasar-dasar pengukuran
    • Istilah-istilah penting dalam pengukuran
    • Analog/digital
    • Mekanik/elektrik
    • Signal conditioning, amplifier, filter, dsb
  • Kesalahan-kesalahan (yang selalu ada) dalam pengukuran
  • Akuisisi data
    • Pengukuran arus dan tegangan
    • ADC, DAC
  • Komunikasi data:
    • Komunikasi serial dan parallel
    • Protokol dalam komunikasi serial
    • Komunikasi data:
      • RS232,
      • RS422,
      • RS485, dsb.
    • Sistem kendali proses
      • Variable Speed Controller
      • Programmable Logic Controller

 

Jadwal Training Advanced Process Control Instrumentation

Hotel Ibis Malioboro ,Yogjakarta

  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

 

Investasi dan Fasilitas Training Advanced Process Control Instrumentation

  • Rp 6.900.000 (Non Residential, Belum Terasuk Pajak)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Instruktur Training Advanced Process Control Instrumentation

Paryana Puspaputra was born in Kotabumi on January 19, 1964, is a Lecturer at the Department of Mechanical Engineering, Faculty of Industrial Technology, Indonesia Islamic University – Indonesia. Undergraduate from Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 1990 and master degree in Mechanical Engineering Department of Nagaoka University of Technology, Japan in 1996. He achieved his doctorate degree in Department of Mechanical Engineering, Bandung Institute of Technology, Indonesia (ITB) in 2012. He is also experienced as consultant and training instructure for several manufacturing and oil company, such as Chevron, Total, KPA, Petrokimia, Semen, Indonesia Power, etc. His background in mechanical equipment and machinery is completed with knowledge in instrumentation technology which was started from his final project in undergraduate by making software and data acquisition for predictive maintenance, and continued with his graduate thesis in control system for nano technology. There are researches and industrial implementation in data acquisition such as building the DNC system for production-shop using CNC machine, developing the balancing machine for Panasia Indosyntex – Bandung, SCADA system Development based on Fuji Electric control system (for IPAL – Pertamina – Cilacap, Toxic Gas Monitoring – Dieng – Central Java, etc). Moreover, he is also an official trainer of softwares for design and manufacturing base on CAD/CAM Technology (AutoCAD, Inventor, and Delcam PowerShape, ArtCAM) and familier with some finite element based analysys softwares such as Moldflow, ANSYS, SAP, CAESAR II, etc.

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

 

 

 

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment