ASME ( American Society of Mechanical Engineer) Design & Fabrication of Pressure Vessels

ASME ( American Society of Mechanical Engineer) Design & Fabrication of Pressure Vessels

Hotel Scarlet, Bandung | 7 – 9 November  2011 | IDR 8.500.000 / participant
Wisma MM UGM, Yogyakarta | 21 – 24 Nov 2011 | IDR 5.750.000 / participant
Wisma MM UGM, Yogyakarta | 28nov -1 des 2011 | IDR 5.750.000 / participant
Wisma MM UGM, Yogyakarta | 5-8 des 2011 | IDR 5.750.000 / participant
Wisma MM UGM, Yogyakarta | 12-15 des 2011 | IDR 5.750.000 / participant
Wisma MM UGM, Yogyakarta | 19-22 des 2011 | IDR 5.750.000 / participant
Wisma MM UGM, Yogyakarta | 26-29 des 2011 | IDR 5.750.000 / participant
Wisma MM UGM, Yogyakarta | 9-12 jan 2012| IDR 5.750.000 / participant
Wisma MM UGM, Yogyakarta | 16-19 jan 2012 | IDR 5.750.000 / participant
Wisma MM UGM, Yogyakarta | 23 – 26 jan 2012 | IDR 5.750.000 / participant
Wisma MM UGM, Yogyakarta | 30 jan – 2 feb 2012 | IDR 5.750.000 / participant

 

Description

Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabrication, inspection, testing and documentation of pressure vessels. It covers the more commonly applied subsections and paragraphs, and includes a practical discussion of individual problems and situations. Designed primarily for beginners, experienced vessel designers, who would like to update their knowledge of the Code, will also benefit from attending.

Course Outline

1. Introduction to ASME Code and section VIII
2. General Requirements
3. Material Requirement
4. General Design Requirement
5. Design for Internal Pressure
6. Design for Buckling
7. Design of Flat Heads and Covers
8. Design of Opening
9. Fabrication Requirement
10. NDE, Testing, Pressure Relief and Documentation Requirement
11. Requirement for Vessels Fabricated by Welding
12. Requirement for Carbon and Low Alloy Steel
13. Requirement for High Alloy Steel
14. Requirement for Heat Treated Material
15. Code Appendices
16. Example Problem

Course Method

Presentation, Discussion, Simulation, Case Study, and Evaluation.

Who Should Attend

• Those involved with the purchase, design, fabrication, or inspection of pressure vessels.
• Some technical background will be helpful

Instructor

Ir. Subarmono MT, PE ( Expert in Mechanical Material )

Duration: 4 days training

Time:

• 7 – 9 Nov 2011
• 21 – 24 Nov 2011
• 28nov -1 des 2011
• 5-8 des 2011
• 12-15 des 2011
• 19-22 des 2011
• 26-29 des 2011
• 9-12 jan 2012
• 16-19 jan 2012
• 23 – 26 jan 2012
• 30jan – 2 feb 2012

Venue:

• Hotel Scarlet, Bandung
• Wisma MM UGM Jl. Colombo No.1 Yogyakarta

Course fee:

Venue: Wisma MM UGM, Jl. Colombo No.1 Yogyakarta

•  Course fee: IDR 5.750.000 / participant (non residential)
• Special rate: IDR 5.500.000/ participant (non residential) for min. 3 participants from same company.
• Special rate: IDR 5.250.000/ participant (non residential) for min. 5 participants from same company.

Venue: Wisma MM UGM, Hotel Scarlet Bandung

• Course fee: IDR 8.500.000 / participant (non residential)
• Special rate: IDR 8.000.000/ participant (non residential) for min. 3 participants from same company.

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days