BASIC ELECTRICAL

BASIC ELECTRICAL

Yogyakarta | 27 – 29 Mei 2019 | Rp 6.500.000/ peserta
Yogyakarta | 26 – 28 Juni 2019 | Rp 6.500.000/ peserta
Yogyakarta | 15 – 17 Juli 2019 | Rp 6.500.000/ peserta
Yogyakarta | 12 – 14 Agustus 2019 | Rp 6.500.000/ peserta

Jadwal Training 2019 Selanjutnya …

 

 

TUJUAN TRAINING

Tujuan dari training ini adalah untuk menambah wawasan mengenai konsepdasar sistem kelistrikan. Pelatihan ditekankan pada pemahaman mengenaiaspek pemanfaatan energi listrik, penggunaan peralatan-peralatanlistrik serta aspek keselamatan dalam pemanfaatan sistem kelistrikan.

Dengan demikian setelah mengikuti pelatihan ini peserta akan dapat :

1. Memahami hukum-hukum Dasar kelistrikan
2. Memahami mengenai konfigurasi jaringan Tenaga Listrik dari
3. pembangkitan hingga pemanfaatan
4. Memahami cara melakukan perhitungan biaya penggunaan energi
5. Memahami prinsip kerja, instalasi dan penggunaan mesin-mesin listrik
6. Memahami mengenai aspek-aspek keselamatan dalam sistem kelistrikan
7. Memahami cara memproteksi peralatan listrik

 

MATERI TRAINING BASIC ELECTRICAL

1. Basic Electrical Concepts & Definitions
   • System overview,
   • Elements of Electrical Power System,
   • Per-unit System
2. Electrical Cost Calculation & Evaluation
3. Electrical Distribution Systems
   • Electrical Power System Configuration,
   • Electrical Distribution Network,
   • Distribution Panel
4. Electrical Machines
   • Electrical Motor Fundamental,
   • Motor Starting and Braking,
   • Motor Protection
5. Electrical Safety
   • Basic Safety Concepts,
   • Electrical Hazards,
   • Safe Operation
6. Grounding System
   • Purpose of Grounding,,
   • Standards (National/IEEE/IEC),
   • Grounded vs. Ungrounded,
   • Distribution Grounding Electrodes
7. Overcurrent Protection
   • Need for protection,
   • Types of fault and Calculation ,
   • Over current protection devices characteristics,
   • Application to Industrial Electrical Utilities protection
   • Application to line protection
8. Power Quality
   • Types of disturbances,
   • Harmonics Sources,
   • Harmonics Mitigation
9. Cases Study and Practices
10. Interactive Discussion

 

INSTRUKTUR TRAINING

 Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon,PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

 

VENUE 

Yogyakarta (Jambuluwuk Hotel/ Ibis Malioboro Hotel/ Ibis Styles Hotel/ Cavinton Hotel/ Harper Hotel/ Melia Purosani Hotel/ Grand Zuri Hotel)

 

TRAINING DURATION 

3 days

 

JADWAL TRAINING 2019

1. 27 Mei 2019-29 Mei 2019
2. 26 Jun 2019-28 Jun 2019
3. 15 Jul 2019-17 Jul 2019
4. 12 Agust 2019-14 Agust 2019
5. 09 Sep 2019-11 Sep 2019
6. 14 Okt 2019-16 Okt 2019
7. 11 Nop 2019-13 Nop 2019

 

INVESTMENT PRICE/PERSON 

1. Rp. 6.500.000/person (full fare) or
2. Rp. 6.250.000/person (early bird, payment 1 week before training) or
3. Rp. 5.950.000/person (if there are 3 persons or more from the same company)

 

FASILITAS UNTUK PESERTA

1. Modul Training
2. Flashdisk Training berisi materi training
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Ransel
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10. Instruktur yang Qualified
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days