Basic Production Engineering : Basic Production Engineering in Oil & Gas Industry

Bandung | January 24-27, 2012 | Rp. 8.250.000,-/ Person

 

 

SASARAN BELAJAR :

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

• Memahami prinsip-prinsip dasar perhitungan optimisasi produksi sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksannaan optimisasi produksi ini untuk meningkatkan kinerja produksi sumuran dan lapangan.
• Melakukan diagnosis sederhana dan memengerti penyelesaian optimisasi produksi dengan analisis nodal.
• Membuat analisis sederhana terhadap data sumuran minyak, gas dan panas bumi , melakukan peramalan kinerja dan merencanakan pengembanganya.
• Melakukan perhitungan-perhitungan kuantitatip sederhana dari seluruh data perolehan data tubing, flowline, choke, perforasi, gravel-pack, sub-surface savety valve pada sumuran, merencanakan pengembangannya dengan memperhitungan kemampuan masing-masing sumuran.
• Mempergunakan pengetahuan optimisasi untuk aplikasi dalam cara pengkatan buatan dengan gas-lift, submersible-pump, sucker rod pump dan hidraulic pump.

PRE-REQUISITE:

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

MATERI KURSUS

• Production System Analysis
  • Nodal System Analysis Model
  • Nodal System Analysis  Application
• Reservoir Performance
  • Equations and Inflow Performance Relationship
  • Real-Time Performance of Oil Wells
  • Performnace Prediction of Oil Wells
  • Real-Time Performance of Gas Wells
  • Performnace Prediction of Gas Wells
  • Effect of Water Production
• Pressure Drop of Fluid Flow in Pipes
  • General Equations and Concepts
  • Fluid Properties : Density,Compressibility Factor etc.
  • Well-Flow Correlations
  • Pipeline Flow Correlations
  • Chokes and Valves Pressure Drop
  • Effect of Velocity
• Total System Analysis
  • Tubing Design
  • Flow line Size
  • Effect of Stimulation
  • Chokes and Valves
  • Effect of Completion
• Artificial Lift Method
  • Gas Lift
  • Submersible Pump
  • Sucker Rod Pump
  • Hydraulic Pump
• Nodal Analysis in Specific Field Application
  • Pressure Drop Calculation in Steam Line
  • Pressure Calculation in Injection Wells
  • Pressure Calculation in Production Wells
  • Total Analysis Approach

Course Leader

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code

• Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.
• Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
• Casual clothing is recommended. The training atmosphere is informal.

Facilities

• Quality training material (hardcopy and softcopy)
• Quality training kits included calculator, T-shirt or jacket, cap, ect.
• Interactive presentation with discussion
• Convenient training facilities with five star quality
• Lunch per day
• Morning and afternoon coffee / tea breaks for along the training
• Certificate of Completion
• Local drop and pick up for arrival and departure between airports to hotel.
• Half day city tour at the end of training session following by dinner with entertainment (Optional)
• Exclusive flash disk.

Tuition Fee & Registration  Deadline

• Rp 8.250.000-/ Person,
• Discount 10 % if register three or more persons from one company.
• Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum) for Oil

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days

Popularity: 1% [?]

Related training:

1. BASIC PRODUCTION ENGINEERING BASIC PRODUCTION ENGINEERING The Jayakarta Suite Hotel & Spa, Bandung | January 26-29, 2010 | USD 770,-/ person   After completing this course you will be expected to: Understand the...
2. PRODUCTION OPTIMIZATION AND MINIMIZING DOWNTIME PRODUCTION OPTIMIZATION AND MINIMIZING DOWNTIME Hyatt Regency Hotel, BANDUNG | November 16-18, 2011 | Rp. 8.500.000,-/ Participant   After participate in this course, the participants will be able and capable...
3. Basic Drilling Engineering Basic Drilling Engineering Bandung | November 1-4, 2011 | IDR 8.250.000,-/ Person   COURSE  OBJECTIVE: After completing this course participants are expected to be able to: Understanding the basic principles...
4. Surface Production System and Facilities Surface Production System and Facilities Melia Purosani Hotel Yogyakarta | April 5-8, 2010 | Rp. 7.250.000,- Novotel Hotel, Batam | Jun 14-17, 2010 | Rp. 7.250.000,- OBJECTIVES After joining in...
5. PRODUCTION OPTIMIZATION USING NODAL ANALYSIS PRODUCTION OPTIMIZATION USING NODAL ANALYSIS Hotel Harris Tebet, Jakarta | 07 s.d  11 November  2011| Rp  3.500.000   Tujuan Pelatihan : Setelah menyelesaikan kursus ini diharapkan peserta dapat : Memahami...
6. BASIC PETROLEUM ENGINEERING ( PETROLEUM ENGINEERING FOR NON ENGINEER ) BASIC PETROLEUM ENGINEERING (PETROLEUM ENGINEERING FOR NON ENGINEER) Yogyakarta |  4 s.d 7 juli  2011 | 08:00-16:00 WIB | Rp 5.500,000,-/peserta (Non resindential)   Description This course provides introduction to...
7. PRODUCTION SURFACE FACILITY : PRODUCTION, PROCESS, SURFACE EQUIPMENT & ITS OPERATION PRODUCTION SURFACE FACILITY : PRODUCTION, PROCESS, SURFACE EQUIPMENT &  ITS OPERATION Papandayan Hotel, Bandung | November 30 – December 02, 2011  | Rp. 8.500.000,-/ Participant After participate in this course,...
8. Pump Selection, Design and Operation for Oil and Gas Surface Production Facilities Pump Selection, Design and Operation for Oil and Gas Surface Production Facilities Bali | September 06-09, 2011 | IDR 8.750.000,-/ Person OBJECTIVES : After participate in this course, the participants...
9. WELL OPTIMIZATION ARTIFICIAL LIFT, GAS LIFT, WELL OPTIMIZATION, TROUBLESHOOTING WELL OPTIMIZATION ARTIFICIAL LIFT, GAS LIFT, WELL OPTIMIZATION, TROUBLESHOOTING The Papandayan Hotel, Bandung | March 19-21, 2012 | Rp. 8.900.000,--/ Participant COURSE OUTLINE Oil Field Production System   Natural Production Systems  ...
10. Maintenance & Production Development Program (Meningkatkan Kinerja Produksi dan Engineering) Maintenance & Production Development Program(Meningkatkan Kinerja Produksi dan Engineering) Hotel Harris, Tebet, / Setiabudi Building II, Kuningan-Jakarta Selatan | 10 – 11 Maret 2011 | Rp 2.750.000,-   PENGANTAR SEMINAR/CONFERENCE...

Updated By Informasi Training • November 18, 2011