By February 28, 2012 0 Comments Read More →

BOILER PLANT OPERATION AND MANAGEMENT

BOILER PLANT OPERATION AND MANAGEMENT for Engineers & Technicians

The Aston Tropicana, Bandung | 25-27 April 2012 | IDR 7.799.000,-/participant
The Aston Tropicana, Bandung | 25-27  July 2012 |IDR 7.799.000,-/participant
The Aston Tropicana, Bandung | 29-31 October 2012 | IDR 7.799.000,-/participant

 

 

ABTRACT

The Boiler Plant Operation and Management workshop is an intensive, highly practical and useful two-day workshop. You will gain the most up-to-date information and practical understanding of the installation, operation, maintenance and management of boiler plants. This workshop will give you the ability to recognise and solve boiler problems simply, easily and with confidence. And we will learn The installation, operation, maintenance and management of boiler plants

CONTENT :

  1. INTRODUCTION
  • Types of package boilers and their applications
  • Boiler components, terminology and definitions
  • Overview of the boiler heating and steam generation process
  • Influence of fuel types on boiler design and operation
  • Firing appliances
  • Basics to the theory of combustion and fundamentals of steam generation
  • Thermal efficiency
  • Fire-side deposits and their influences
  • Water treatment and dosing plant
  • Feed water pumps, valves, steam traps,piping, fans, and dampers
  • Firingsystems
  • Economisers and heat recovery equipment
  • Flue gas cleaning and dust removal
  • Soot blowers
  1. FUEL COMBUSTION AND STEAM GENERATION PROCESS
  1. BOILER AUXILIARY PLANT
  • Practical session and questions
  1. OPERATIONS AND CONTROLS
  • Boiler instrumentation and its purpose
  • Typical P&I diagrams for coal/oil fired package units
  • OEM operating manuals
  • Control systems or loops
  • Operation and control philosophy,sequences and procedures
  • Safety equipment and emergency procedures
  • Typical operational problems, reasons for the problems
  • Troubleshooting
  • Operating records and logs
  • The do’s and don’ts of boiler operation and corrective action
  • Basics to codes calculation theory and assumptions
  • Overview of design parameters for shell,furnace, plates and tubing
  • Importance of pressure part inspection
  • Critical importance of maintenance policies and programmes
  • Manufacturers literature and requirements
  • Regularity of inspections and maintenance
  • Critical items for maintenance for safety,efficiency and reliability
  • Country/state legislation regarding inspection and repairs
  • Authorised inspection authority involvement
  • Maintenance records and preventative maintenance
  • In-house vs contractor repair maintenance
  • The do’s and don’ts in terms of boiler maintenance
  • When does a boiler repair become a boiler modification?
  • Importance of historical records
  • Understanding the steps and requirements when undertaking modifications
  • Boiler owner and contractor responsibilities
  • AIA and their inspection points
  • The do’s and don’ts regarding boiler repairs
  • Importance of an established storage period, preservation steps and return of the boiler
  • Storage instructions and procedures
  • Consequences of no plan
  • Types of emissions for different fuels fired
  • Control of boiler flue gas emission
  • Flue gas cleaning and scrubbing equipment
  • Oil and gas burner design to reduce NOx emissions
  • Effectiveness of gas cleaning or scrubbing equipment
  • Acceptable emission levels
  1. PRESSURE CONTAINING COMPONENTS
  1. PLANNING AND MANAGING BOILER MAINTENANCE
  1. MANAGING BOILER REPAIRS AND MODIFICATIONS
  1. COLD STORAGE OF A BOILER
  1. EMISSION CONTROLS AND ENVIRONMENTAL CONSTRAINTS

 

OBJECTIVES

This practical three-day workshop will give you the knowledge to enable you to:

  • identify the various types of boilers
  • use essential terms and understand their key applications
  • describe the typical characteristics of fuels fired
  • perform basic combustion and process calculations
  • recognise the impact fuels have on the boiler heat transfer surfaces
  • describe the ancillary equipment associated with steam boiler plants and their integral role in the safety of the boiler
  • discuss the correct operation, control sequences and procedures for the safe operation of a typical fire-tube boiler plant
  • outline the applicable pressure part design codes and explain their influence on boiler pressure parts sizing, inspection and non-destructive examination
  • initiate an effective inspection and maintenance programme
  • minimise forced outages and prevent serious damage to boiler equipment
  • provide an overview of the legislative requirements plus the essential steps and responsibilities for the repair of boilers
  • recognise the importance of and implement the procedures for the protection of a boiler during cold storage
  • outline the technologies available for the reduction of emission levels and the applicable international legislative controls

WHO SHOULD ATTEND:

Senior Boiler Plant Operators, Repairers & Installers, Boiler Plant Construction Managers, Plant Engineers , Operation, Maintenance, Inspection & Repair Managers, Supervisors & Engineers , Mechanical Engineers & Technicians , Design Engineers , Insurance Company Inspectors , Consulting Engineers

INSTRUCTOR

Dr. Ir. Harwin Saptoadi, M.Sc.

Lab work in Mechnical Engineering of Gadjah Mada University

TEMPAT DAN WAKTU

Waktu           : 08.30-16.30 WIB
Tempat         : The Aston Tropicana Bandung
Tanggal        :

  • 25-27 April 2012 (Bacth II)
  • 25-27  July 2012 (Bacth III)
  • 29-31 October 2012 (Batch IV)

INVESTASI

  • IDR 7.799.000,-/participant non residensial.
  • For send 3 participant discount 10 %.

 FASILITAS

  • Meeting Room Hotel ****
  • Training KIT
  • Souvenir
  • Sertifikat
  • 2 X Coffe Break + Lunch

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • Google Bookmarks
  • Y!GG
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • MySpace
  • Technorati
  • YahooMyWeb
  • YahooBuzz

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment

Switch to our mobile site