Hotel Ibis, Yogyakarta | 13-15 Februari 2012 | Rp 5.500.000,- per peserta
Hotel Ibis, Yogyakarta | 27 Februari  – 1 Maret  2012 | Rp 5.500.000,- per peserta
Hotel Ibis, Yogyakarta | 12 -14 Maret 2012 | Rp 5.500.000,- per peserta
Hotel Ibis, Yogyakarta | 19 -21  Maret 2012 | Rp 5.500.000,- per peserta
Hotel Ibis, Yogyakarta | 26 – 28 Maret 2012 | Rp 5.500.000,- per peserta (PASTI JALAN)
Hotel Ibis, Yogyakarta | 2 – 4 April 2012 | Rp 5.500.000,- per peserta
Hotel Ibis, Yogyakarta | 9 – 11 April 2012 | Rp 5.500.000,- per peserta
Hotel Ibis, Yogyakarta | 16- 18 April 2012 | Rp 5.500.000,- per peserta
Hotel Ibis, Yogyakarta | 23 – 25 April 2012 | Rp 5.500.000,- per peserta
Hotel Ibis, Yogyakarta | 30 April – 02 May 2012 | Rp 5.500.000,- per peserta

Deskripsi

Energi listrik merupakan energi yang sangat vital dalam  operasional perusahaan. Hampir semua peralatan dan sumber penerangan  yang digunakan berasal dari energi listrik . Namun dalam pemakaiannya  banyak dikeluhkan adanya ketidak-efisiensian energi listrik ini. Hal ini terbukti dari membengkaknya tagihan listrik yang harus dibayarkan perbulannya.  Terlebih apabila ini terjadi dilingkungan kantor atau perusahaan maka akan mengakibatkan anggaran biaya yang cukup besar.

Tingkat efisiensi pemakaian listrik di pengaruhi oleh daya listrik yang terpasang, aktivitas yang dilakukan,jenis peralatan yang terpasang dan rata-rata pemakaian listrik perhari/per bulan.Untuk mengefisiensikan pemakaian listrik, maka perlu dilakukan manajemen audit energi listrik dimana dengan audit tersebut akan didapatkan potret pengunaan energi listrik pada suatu bangunan, mengetahui kondisi peralatan yang terpasang dan mengetahui peluang untuk penghematan energi. Keberhasilan program efisiensi pemakain energi listrik, selain dipengaruhi oleh faktor teknis juga sangat bergantung pada komitmen manajemen puncak dan komitmen seluruh karyawan dalam gerakan efisiensi.

Tujuan dan Manfaat

1. Peserta pelatihan memahami prinsip- prinsip penerapan penghematan energi di perusahaan masing-masing.
2. Peserta pelatihan mampu mengenali potensi-potensi penghematan energi di perusahaan masing-masing.
3. Peserta pelatihan mampu membuat langkah – langkah program penghematan energi

MATERI MANAJEMEN DAN AUDIT EFISIENSI  ENERGI LISTRIK

1. Karakteristik penggunaan energi di bangunan gedung.
2. Strategi  Penghematan Energi listrik
3. Perencanaan Program Penghematan Energi
4. Audit energy
5. Pembentukan tim penghematan energi  dan Pengkajian sumber penggunaan energi
6. Membangun budaya  gerakan efisiensi pemakaian listrik
7. Studi kasus penerapan program penghematan energi

Peserta

Pelatihan ini ditujukan bagi manajer,kepala bagian umum,kepala bagian sarana dan prasarana, dan seluruh staf perusahaan  yang terkait dengan pemakaian energi  listrik

Metode

Presentasi, Diskusi , Brainstorming, Case Study,Evaluasi

Waktu  Dan Tempat

Hotel  Ibis,Malioboro, Yogyakarta

• 13-15 Februari 2012
• 27 Februari  – 1 Maret  2012
• 12 -14 Maret 2012
• 26 – 28 Maret 2012
• 02 – 04 April 2012
• 09 – 11 April 2012
• 16 – 18 April 2012
• 23 – 25 April 2012
• 30 April – 02 Mei 2012
• 14 – 16 May 2012
• 28 – 30 May 2012
• 11 – 13 June 2012
• 25 – 27 June 2012
• 02 – 04 July 2012
• 09 – 11 July 2012
• 13 – 15 August 2012
• 27 – 29 August 2012
• 10 – 12 September 2012
• 17 – 19 September 2012
• 01 – 03 October 2012
• 08 – 10 October 2012
• 12 – 14 November 2012
• 26 – 28 November 2012
• 10 – 12 December 2012
• 24 – 26 December 2012

Investasi dan Fasilitas

• Rp 5.500.000 (Non Residential)
• Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
• Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel

Instruktur

IR. Suprapto.MT

Memiliki pengalaman luas sebagai praktisi dan  trainer di bidang  Electricity Maintenance.

Untuk Pendaftaran atau informasi lebih lanjut tentang training MANAJEMEN DAN AUDIT EFISIENSI  ENERGI LISTRIK, silakan mengisi formulir di bawah ini:

cforms contact form by delicious:days

Yogyakarta | 07-10 May 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 10-13 September 2012 | IDR 7.000,000.00 per participant

DESCRIPTION

To prevent fires and reduce its impacts, required level of knowledge about adequate fire. Many factors could accelerate the occurrence of a fire hazard or fire and even explosions, these factors are sometimes overlooked by most people, but fire prevention is easier and cheaper, than the effort to overcome. Therefore, in this training fire prevention efforts are preferred.

WHO SHOULD ATTEND

Occupational Safety and Health Expert, All Members P2K3, All ranks of managers and supervisors of the Company starting from Section Production, Maintenance, Engineering, Analyst, Personnel, Training and Development Safety, All of those employees and is expected to help conduct its own analysis of each crash area.

SUMMARY OUTLINE

1. The phenomenon of fire
2. Fire extinguisher and how to use it.
3. Characteristics of fuel
4. Explosion Hazard and control of flammable liquid
5. Materials
6. Permit areas of work
7. Fire
8. Non-combustible fire hazard analysis
9. Fire & Emergency Response Management fire prevention

METHODE

• Discuss
• Case Study
• Evaluation
• Simulation

INSTRUKTUR

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

TIME & VENUE

• Yogyakarta
• 07-10 May 2012
• 10-13 September 2012
• 4 days – 08 am – 04 pm

COURSE FEE

IDR 7.000,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

cforms contact form by delicious:days

Yogyakarta | 28-31 May 2012 | IDR 7,000,000.00 per participant
Yogyakarta | 24-27 September 2012 | IDR 7,000,000.00 per participant

DESCRIPTION
The integrity of appropriate fire protection systems and equipment in a facility is essential to minimize risk to personnel and to protect the facility and equipment within the facility. This course examines equipment associates with:

• protecting personnel (alarms, emergency lighting, etc.) in the event of a fire and
• minimizing the impact of a fire on equipment and property (sprinkler systems, extinguishing devices, etc.) The concluding topic of the course will be a checklist that can be applied to the participants own facility.

WHO SHOULD ATTEND
Institutional, commercial and industrial facility managers, engineers, supervisors and superintendents. Plant operation and maintenance engineers, technicians and supervisors. Staff whose responsibilities include fire protection systems in kitchen facilities. Insurance company representatives.


OBJECTIVE

•  To provide an understanding of the various types of fire protection equipment and to discuss the related maintenance and inspection practices.
• To provide an awareness of prevailing codes and regulations
• To develop a maintenance and inspection checklist for the participants own facility.

SUMMARY OUTLINE
Codes and Regulations
• ULC S536
• Building code
• Fire code

Fire Pumps and Water Supply
• Pumps and pump drivers
• Piping and valves
• Heat tracing
• Control panels
• Hydrants
• Inspection and maintenance

Personnel Egress and Access by Emergency Vehicles
• Passageways
• Doors, crash bars and door closures
• Elevators
• Driveways
• Signs
• Inspection and maintenance

Exercise

Alarms
• Types
• Detectors and signals
• Control panels
• ULC listed monitoring
• Remote annunciation
• Testing
• Inspection and maintenance

Sprinkler Systems
• Types of Systems
• Types of heads
• Piping and valves
• Alarms
• Inspection and maintenance

Review of Egress And Access Emergency Lighting
• Generators, batteries
• Testing
• Inspection and maintenance

Staff Considerations
• Emergency organization structure
• Emergency evacuation plan
• The anatomy of a fire
• Training and drills

Exercise

Other Fire Fighting Equipment
• Standpipes and hoses
• Portable extinguishers
• Industrial paint spray booths
• Kitchen suppression
• Inspection and maintenance

Program Justification
• Authorities having jurisdiction
• Justifying the dollar and manpower resources required
• Contracting out inspection and maintenance services
• Satisfying insurance carriers
\

COURSE METHOD

• Presentation
• Discuss
• Case Study
• Evaluation
• Simulation

TIME & VENUE
Yogyakarta,
28-31 May 2012
24-27 September 2012
4 days (08 am – 04 pm)

COURSE SPEAKER

Teguh Pudji Purwanto, Ir, MT
Teguh Pudji Purwanto experienced more than 26 years in mechanical industry.

COURSE FEE
IDR 7,000,000.00 per participant non residential

FACILITY

• Module / Handout
• Certificate
• Souvenir
• Training Kit

cforms contact form by delicious:days

Yogyakarta | 16-19 April 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 30 July-02 August 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 03-06 December 2012 | IDR 7.000,000.00 per participant

DESCRIPTION

A training module that meets Occupational Safety and Health Administration guidelines for training and awareness pertaining to practical safeguarding of employees in their workplace. This information is applicable to all electric equipment and installations used to provide electric power and light for employee workplaces. This course is designed to provide guidance on working safely on low voltage electrical equipment & systems (up to 1000V AC 1500V DC) located within industrial environments. The course will assist employees and companies reduce the risk of personal injury, due to electrocution and arc flash, also to help prevent damage to assets due to operator error.

OBJECTIVE

Upon completion of this training the student will be familiar with:

• Description of basic principles of electricity
• Typical electrical hazards and the types of injuries they can cause
• Protective measures for avoiding personal injury from electrical hazard
• General rules for responding to an electrical emergency
• To raise the level of safety awareness for all personnel working with electrical equipment and for the candidates to comprehend the safety rules, regulations & guidelines related to current legislation

WHO SHOULD ATTEND

Non electrical personnel requiring electrical safety awareness training to enable to become aware of the hazards associated with installing, maintaining or operating electrical equipment

SUMMARY OUTLINE

1. Hazards & Effects of Electricity.
2. Arc Flash.
3. Selection & Use of Suitable PPE.
4. Electricity at Work Regulations 1989.
5. Permit to Work (PTW).
6. Electrical Documentation.
7. Safe Electrical Isolations.
8. Risk Assessments.
9. Harmonised Cable Conductor Colours & Markings.
10. Earthing & Bonding.
11. Portable Appliances.
12. Fault Levels & Fault Energy.
13. Electrical Equipment in Hazardous Areas.
14. Maintenance of Electrical Equipment.
15. Safe Use of Test Equipment

METHODE

• Discuss
• Case Study
• Evaluation
• Simulation

INSTRUKTUR

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

TIME & VENUE

• Yogyakarta
• 16-19 April 2012
• 30 July-02 August 2012
• 03-06 December 2012
• 4 days – 08 am – 04 pm

COURSE FEE

IDR 7.000,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

cforms contact form by delicious:days

Yogyakarta |  13-16 February 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 28-31 May 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 24-27 September 2012 | IDR 7.000,000.00 per participant

OBJECTIVE

To familiarise all sections of people involved in electrical trade from Generator, Transmission, Distribution of electricity and Industrial consumers about the Statutory Electricity Rules relating to Safe Erection, Testing and Commissioning of all electrical equipment.

WHO SHOULD ATTEND

Practising Engineers from Generators, Transformers, distributors, Industrial and other consumers of electricity, Electrical Inspectors and Electrical Consultants.

SUMMARY OUTLINE

1. Overview of Indian Electricity Rules 1956 and amended thereof
2. Indian Electricity Act-2003
3. Earthing System Design
4. Circuit Breakers and Protective Relays
5. Inspection Procedure for statutory inspection by Electrical Inspectors
6. Pre-commissioning tests of Transformers, Switch Gears and Power Cables
7. Electrical Accidents – Case Studies
8. First Aid and Fire Fighting practices in Industrial Installations
9. Field Visits

METHODE

• Discuss
• Case Study
• Evaluation
• Simulation

INSTRUKTUR

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

TIME & VENUE

• Yogyakarta
• 13-16 February 2012
• 28-31 May 2012
• 24-27 September 2012
• 4 days – 08 am – 04 pm

COURSE FEE

IDR 7.000,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

cforms contact form by delicious:days

Yogyakarta |  23-26 April 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 06-09 August 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 10-13 December 2012 | IDR 7.000,000.00 per participant

DESCRIPTION

In order to work within the field of fire detection design it helps to understand the standards and principles behind the equipment. From service technicians through the sales team to system designers, an understanding of the basic principles of BS5839 Pt 1 will help your staff to speak with authority on all issues arising in this technical field of the industry. Whether dealing with clients’ questions or when providing details of the equipment that your business uses this course will prove to be invaluable. It also serves as the foundation from which to develop a more specialised understanding of an area of the fire industry that includes numerous standards and codes of practice. To present the professional image you need professional people, understanding the British Standard alongside the equipment you supply, fit and maintain. The course helps in developing the necessary professional knowledge and understanding.

WHO SHOULD ATTEND

The course will benefit anyone that requires an understanding of the basic principles of BS5839 Pt 1, particularly those aiming to complete other units in our suite of Fire Detection and Alarm courses as this course forms the pre-requisite foundation.

SUMMARY OUTLINE

1. The legislation
2. Guides and codes of practice relevant to fire detection and alarms
3. The categories of systems for a building (i.e. L1 to L5 : P1 to P2)
4. Detector types and choices
5. Manual call point zones
6. Detector and alarm zone sizes and constraints
7. Technology and system components
8. Detector coverage, taking into account obstructions
9. Sounder requirements
10. False alarm management and good maintenance
11. New cable requirements
12. Design certificate

METHODE

• Discuss
• Case Study
• Evaluation
• Simulation

INSTRUKTUR

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

TIME & VENUE

• Yogyakarta
• 23-26 April 2012
• 06-09 August 2012
• 10-13 December 2012
• 4 days – 08 am – 04 pm

COURSE FEE

IDR 7.000,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

cforms contact form by delicious:days

Yogyakarta | 09-12 April 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 23-26 July 2012 | IDR 7.000,000.00 per participant

DESCRIPTION

OSHA 29CFR1910 Subpart S is the new labor law that spells out safe work practices on electrical equipment. As of August 1990, all persons who install, maintain, repair, or just work near electrical power equipment must be trained in the hazards these systems may present. Related electrical safety information not required by OSHA is also presented.

WHO SHOULD ATTEND

• Engineering and design personnel
• Maintenance and technical services personnel
• Process and operations personnel
• Technical and process managers
• Engineering and design personnel
• Electrical consulting engineers
• Electrical contractors

SUMMARY OUTLINE

1.    The New Law

• OSHA 29CFR1910 Subpart S
• NFPA 70E – The Old Rule

2.    What is an Electrical Hazard?

• The Potential of Electric Shock, Electrocution, Arcs, Blasts, Burns, Projectiles, or Pressure Waves

3.    How to Avoid Becoming a Statistic

• Electrical Safety Statistical Data
• Unsafe Conditions vs. Unsafe Acts
• Effects of Electric Shock on Humans
• Unsafe Voltage and Current Levels?
• The “Qualified Person” – as defined by OSHA

4.    Energized Equipment

• Voltage Sensors and Meters
• Making Circuits Safe
• Lock-out and Tag-out Procedures
• New Electrical Lock-out Requirements

5.    Safe Work Practices

• Alertness (NFPA 70E)
• Illumination Requirements
• Working with Conductive Apparel
• Conductive Equipment Near Electrical Hazards
• Use of Insulated Tools
• Employing Protective Shields
• Portable Ladders Around an Electrical Hazard
• Confined or Enclosed Work Spaces
• Housekeeping
• Properly Dealing with Interlocks

6.    Use of Equipment

• Portable Electric Equipment and Extension Cords
• Electric Power and Lighting Circuits
• Test Instruments and Equipment
• Use of Flammable Materials

7.    Personnel Protection

• Personal Protective Equipment
• Safety Signs, Tags, and Barricades
• Danger vs. Caution Vs Warning

METHODE

• Discuss
• Case Study
• Evaluation
• Simulation

INSTRUKTUR

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

TIME & VENUE

• Yogyakarta
• 09-12 April 2012
• 23-26 July 2012
• 4 days – 08 am – 04 pm

COURSE FEE

IDR 7.000,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

cforms contact form by delicious:days

Yogyakarta | 26-29 March 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 09-12 July 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 10-13 December 2012 | IDR 7.000,000.00 per participant

DESCRIPTION

This electrical safety awareness course for non-electrical workers provides a solid foundation for compliance considerations by building owners, managers, supervisors and employers who realize the importance of electrical safety in their workplace. This course is intended to raise awareness about electrical safety both on and off the job. The target audience is non-electricians, including maintenance workers, machine operators and anybody who works with and around electrical tools or equipment.

WHO SHOULD ATTEND

• Industrial plant managers and supervisors
• Occupational health and safety coordinators
• Federal, provincial and municipal government building owners, managers, operators and Building service technicians
• Private commercial and institutional building owners, managers, operators and Building service technicians
• Non Electrical Skilled workers such as: Fitters, Painters, Carpenters, Laborers, Utility Operators, Equipment Operators, Janitors, Waste Handlers and Warehouse Workers, HVAC Personnel

SUMMARY OUTLINE

BASIC ELECTRICAL TERMINOLOGY

•  Current
•  Resistance
• Voltage
• Conductors
• Insulators
•  Grounding

HAZARDS OF ELECTRICITY

•  Electrical shock
• Arc flash
• Arc blast

STEP AND TOUCH POTENTIAL

• Step potential
• Touch potential

ELECTRICAL SHOCK

• Dangers of electrical shock
• Effects of electricity on the body
• How is an electrical shock received?
• Low voltage does not mean low hazard
• Examples of electrical burns and injuries
• Examples of electrical accidents involving non-electrical personnel

ARC FLASH

•  Characteristics of an arc flash

ARC BLAST

• Characteristics of an arc blast

RECOGNIZING ELECTRICAL HAZARDS

•  Exposed wiring
• Tripping and abrasion hazards
• Cabinets, boxes, and fittings
•  Daisy chain multi-outlet strips
• Electrical boxes
• Damaged grounding plugs
• Broken conduit and damaged equipment
• Overhead lines
•  Underground cable

SAFE WORK PRACTICES

•  Portable electric equipment and flexible cord set requirements
• Electrical power tool safety
• Cord control
• Extension cords – items to consider before use
•  Resetting breakers
• Conductive apparel
• Wall penetrations
• Equipment applications and standards labeling
• Using ground fault circuit interrupter to protect workers
• Circuit breaker tripping and molded case circuit breakers
•  Downed power lines
•  Ladders used around electrical hazards
• Approach distances to overhead lines.
•  Specific clearance requirements around electrical equipment
• Emergency generators
• Battery banks
• Battery chargers

ELECTRICAL SYSTEM INTRUSIONS

• Excavating, cutting or drilling into electrical systems

OBEYING ALL SIGNS AND BARRIERS

•  Signs, symbols, tags, and barricades are used to warn personnel of potential electrical hazards – know how to read and obey them

ELECTRICAL HAZARDS ENCOUNTERED BY SPECIFIC WORK GROUPS

• Welders
• Heavy equipment operators
• Excavators
• Warehouse workers
• Painters

ELECTRICAL EMERGENCIES

• Electrical accidents
• Electrical rescue techniques
• Role of CPR

ELECTRICAL SAFETY FOR BUILDING OWNERS, MANAGERS AND SUPERVISORS

• Federal legislation – Bill C45
•  Provincial electrical safety legislation governing the workplace
• Canadian Electrical Code
• Overview of CSA Z462 Electrical Safety in the Workplace (simplified)
• Who is a qualified electrical person?
• Who is an unqualified electrical person?
• Safe work vs unsafe work

HIRING OUTSIDE CONTRACTORS WHO ARE CSA Z462 COMPLIANT (CHECKLIST)

• Provide Arc Flash assessment to contractors
• Provide hazard assessment of work location(s) to contractors
• Have contractors provide their procedures when working with electricity
• Contractor qualifications and who from contractor to take out electrical permit as per local regulation

ELECTRICAL SAFETY TRAINING PROGRAMS

• Meeting Provincial regulations
• Adopting electrical standards such as CSA Z462
• Establishing and identifying who within the facility is qualified to work on electrical equipment

ELECTRICAL ENERGIZED WORK PERMITS

• Where energized work permit needed
• Exemptions
• Sample of energized work permit

LOCKOUT RULES

• Individual lockout requirements
• Group lockout requirements
•  Locks, tags and hardware to be used

ROLE OF THE “SAFETY WATCHER”

• Qualifications of safety watcher
• Where safety watcher used
•  Authority of safety watcher

RULES GOVERNING ELECTRICAL EQUIPMENT LABELING

• Labelling to address electrical code requirements
• Labelling needed to meet CSA Z462 standard
• Who applies labelling

ELECTRICAL SAFETY CLOTHING AND PPE FOR ELECTRICAL PERSONNEL

• Description of all PPE as related to Electrical shock and arc flash
• Training on use of PPE
• Procedures where PPE is required

METHODE

• Discuss
• Case Study
• Evaluation
• Simulation

INSTRUKTUR

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

TIME & VENUE

• Yogyakarta
• 26-29 March 2012
• 09-12 July 2012
• 10-13 December 2012
• 4 days – 08 am – 04 pm

COURSE FEE

IDR 7.000,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

cforms contact form by delicious:days

Yogyakarta | 05-08 March 2012  | IDR 7.000,000.00 per participant
Yogyakarta | 16-19 July 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 19-22 November 2012 | IDR 7.000,000.00 per participant

OBJECTIVE

• Define short circuits and electrical arcs.
• Understand arc flash parameters.
• Determine energy released during a short circuit and why you need to be protected.
• Learn techniques for reducing arc flash energy.
• Learn how to protect yourself and those around you from electrical hazards.
• Learn how to select proper personal protective equipment (PPE) for the right environment.

WHO SHOULD ATTEND

Utility, industrial, commercial, institutional electrical professionals, electrical contractors, and others who are involved in hands-on electrical roles or maintenance planning. This includes electrical engineers, electrical technicians, electricians, linemen, supervisors, and other personnel who work on or near energized electrical equipment and systems are also prime candidates for this course.

SUMMARY OUTLINE

Course Introduction

•  Instructors Background and Introduction
• Review course objectives
• About NETA, NFPA and 70E

Understanding Electrical Power Systems

• Basic Electrical Theory & Commonly Used Formula
• Electrical Definitions, Terminology and Acronyms
•  Drawing Symbols & IEEE Device numbers
• Single lines & 3 line drawings
• AC/DC Trip & Control Schematics
• Ground Fault Systems
• Time-Current Characteristics
• Power System Studies

Electrical Safety & Arc Flash Hazards

• Review NFPA 70E Standard for Electrical Safety in the Workplace
• General Categories of Electrical Hazards
•  Statistics on Workplace Incidents
• Qualified Electrical Personnel
• Establishing an Electrically Safe Work Condition
• Working on or Near Live Parts
• Energized Electrical Work Permits
• Arc Flash Considerations
•  Incident energy calculations
• Limits of approach & Flash Protection Boundary
• Personal Protective Equipment
• Hazard Risk Categories

Solutions to Limit Your Exposure

• Accurate Electrical Drawings
• Flash Hazard Analysis and Implementation
•  Relaying Upgrades
• Arc Resistant Switchgear

Solutions to Limit Your Exposure

• Regular Maintenance
• NETA Recommended Power System Testing Intervals
• Partial Discharge Technology

Safety Equipment Overview

• Personal Protective Equipment Voltage Detection Equipment, Hot-sticks, Grounds
• Applying Temporary Personal Safety Grounds
• High Voltage Flash suit

Course Wrap Up

• Review Quiz
• Open Forum Discussions
• Questions and Answer Period
• Adjournment

ELECTRICAL SAFETY AND FLAME RESISTANT (FR) GARMENTS
The presentation is designed to inform delegates of the changes to the safety system

• What is FR clothing and why is it important
•  How FR fabrics are engineered to be flame and arc resistant
•  Body burn injury basics
•  Extensive video of high and low voltage arc flash with FR and non FR clothing
• ATPV testing: how it is done, what it means, and review of data
• Creating an FRC program
• Proper use and maintenance of FRC
• Hazard Assessment and Inherently Flame Resistant Clothing Programs

ELECTRICAL SAFETY AND ELECTRICAL PROTECTIVE EQUIPMENT
ASTM, OSHA, NFPA Regulations and standards regarding the specification and use and care of:

• Proper use, inspections & tests of PPE
• Rubber insulating gloves
•  Insulating equipment
•  Arc equipment
•  Insulated/insulating hand tools
•  Proper selection and care of insulated equipment

PROVINCIAL ELECTRICAL SAFETY CODES & INDUSTRIAL FACILITIES

METHODE

• Discuss
• Case Study
• Evaluation
• Simulation

INSTRUKTUR

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

TIME & VENUE

• Yogyakarta

• 05-08 March 2012
• 16-19 July 2012
• 19-22 November 2012

• 4 days – 08 am – 04 pm

COURSE FEE

IDR 7.000,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

cforms contact form by delicious:days

 Yogyakarta | 22-24 February 2012 | IDR 4.500,000.00 per participant
Yogyakarta | 19-21 Maret 2012 | IDR 4.500,000.00 per participant - (PASTI JALAN)
Yogyakarta | 18-20 Juni 2012 | IDR 4.500,000.00 per participant

DESCRIPTION

CSMS sangat penting dalam proses pembiinaan rekanan kontraktor di perusahaan. Karena mampu memberikan disiplin bagi rekanan dalam mengaplikasikan safety dan dokumentasi. Banyak industri besar saat ini mempergunakan tenaga kerja kontraktor, outsourching untuk mendapatkan cost yang lebih efisien. Begitu juga sebaliknya hal ini menjadi tantangan tersendiri bagi para kontraktor di Indonesia untuk bias memenuhi kebutuhan pekerjaan industri pemberi kerja dengan dana yang terbatas namun dituntut dengan tingkat kualitas dan keamanan yang tinggi.

Semakin hari pekerja menjadi semakin sadar akan halnya kebutuhan keselamatan kerja tidak saja gaji yang di tuntut, tetapi kebutuhan keamanan dalam melakukan pekerjaan baik itu sebagai pekerja tetap di perusahaan induk pemberi kerja maupun pekerja kontraktor. Safety performance menjadi salah satu indikasi parameter sebuah perusahaan bisa di katakan maju dan berkembang.

Kecelakaan kerja baik yang terjadi di area perusahaan induk maupun di kontraktor perlu di evaluasi untuk bisa turunkan angka frekuensi kecelakaan kerja dengan membangun system Contractor Safety Management System (CSMS). Membangun document standard ini di butuhkan baik bagi perusahaan induk sebagai pemberi kerja maupun dari sisi kontraktor sebagai penyedia tenaga kerja, tujuannya agar system bisa berjalan dan angka kecelakaan kerja bisa di turunkan.

Sistem Manajemen Kesehatan & Keselamatan Kerja sangat mandatory untuk Contractors, Vendors dan Suppliers yang bergerak di Industri Oil & Gas. Kinerja Sistem Manajemen K3 organisasi para Contractor, Vendor dan Supplier akan diaudit terlebih dahulu sebelum mendapatkan kontrak

WHO SHOULD ATTEND

Everybody or whoever who involve in CSMS, such as:

• Management Representative (MR), Contractor Representatives, end users of Company/Owners (Operations Department personnel), Contract Administrator, Services Department personnel, Procurement personnel, Operation/Production Manager
• HRD Manager, Training and Development Manager

OBJECTIVE

Diharapkan setelah mengikuti training, peserta :

1. Mengetahui & memahami program CSMS, elemen, serta persyaratannya
2. Mampu menyusun document CSMS bagi kontaktor
3. Mampu menyusun document kebutuhan safety bagi perusahaan induk
4. Mampu melakukan review document CSMS yang di submit oleh kontraktor
5. Lebih mudah untuk meningkatkan kinerja safety baik pekerja induk maupun kontraktor
6. Lebih mudah dalam pelaksanaan berbagai safety program
7. Mampu melakukan seleksi terhadap kontraktor yang mempunyai safety program

SUMMARY OUTLINE

1. Introduksi CSMS
2. Konsep CSMS
3. Tujuan CSMS
4. Proses CSMS :

1. Risk Assessment
2. Pre – Qualification Process
3. Selection and Job Awarded
4. Pre Job Activity
5. Work in Progress
6. Final Evaluation

5. HSE Program

COURSE SPEAKER

Patisina, ST., M.Eng dan TEAM

Praktisi dan Akademisi, berpengalaman dalam membuat HES PLAN, mengerjakan beberapa proyek di swasta dan Pemerintahan dan CSMS, Memiliki sertifikasi AK3 Depnakertran RI

COURSE METHODE

• Presentation
• Discuss
• Case Study
• Evaluation
• Simulation

TIME & VENUE

• (Hotel IBIS) Yogyakarta,
• 22-24 Febraury 2012
• 19-21 Maret 2012
• 18-20 Juni 2012
• 4 days – 08 am – 04 pm

COURSE FEE

IDR 4,500,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

cforms contact form by delicious:days

Golden Flower Hotel, Bandung | 10-13 Oct 2012 | Rp 7.250.000,-

PENDAHULUAN :

Pada rotary machinery dengan adanya beban dan umur pemakaian akan mencapai tingkat kritis yang sangat tinggi dan cenderung terjadi kerusakan. Kerusakan yang kecil pun bisa menjadi sumber frustasi dan mungkin pula dapat menambah parahnya kerusakan total. Kerusakan tidak akan terjadi tiba-tiba melainkan dari sedikit demi sedikit dan ditandai dengan timbulnya getaran yang berlebihan.

Mesin tersebut harus dijaga dari gejala-gejala yang dapat mengakibatkan kerusakan dengan pendeteksian sedini mungkin. Untuk mengantisipasi kondisi tersebut diperlukan inspeksi dan monitoring secara rutin dan periodik, sehingga gejala gangguan dapat dengan segera diperbaiki agar tidak menimbulkan kerusakan yang lebih parah.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi bidang Machinery Noise and Problem Solving (Kebisingan Mesin dan Penyelesaiannya).

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI? :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perawatan mesin pada industri manufaktur dan industri minyak yang terkait langsung dengan kebisingan mesin.

MANFAAT YANG DIPEROLEH:

Setelah  mengikuti pelatihan ini peserta diharapkan :

1. Pemahaman tentang pengetahuan getaran mesin, dasar-dasar bunyi dan sumber terjadinya kebisingan, serta dampak dan bahaya kebisingan.
2. Pemahaman tentang peraturan pemerintah terhadap tingkat kebisingan, tingkat getaran dan nilai ambang faktor kebisingan di tempat kerja.
3. Keahlian dalam melakukan teknik pengukuran getaran, teknik pengukuran kebisingan dan analisis pengukuran kebisingan, dan penentuan tingkat bahaya kebisingan, serta pengendalian kebisingan.

CAKUPAN MATERI TRAINING :

1.    Getaran mekanik

• Prinsip getaran mekanik
• Getaran bebas derajat kebebasan tunggal
• Getaran bebas derajat kebebasan ganda
• Getaran unbalance dan misalignment
• Pengukuran getaran dan standar kelayakan

2.    Dasar-dasar bunyi dan kebisingan

• Pengukuran kebisingan di lingkungan kerja
• Pengukuran kebisingan dengan analisis frekuensi

3.    Tingkat kebisingan dan getaran (peraturan pemerintah)

• Nilai tingkat tekanan bunyi
• Nilai tingkat tekanan bunyi dari berbagai sumber bunyi
• Nilai ambang faktor kebisingan di tempat kerja

4.    Pengendalian kebisingan

• Teknik pengendalian kebisingan
• Pemetaan kebisingan dan kurva rating kebisingan
• Tahanan pengendalian kebisingan

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

VENUE :

Golden Flower Hotel, Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

10-13 Oct 2012

INVESTATION PRICE/ PERSON :

1. Rp 7.250.000/peserta (bayar penuh)  atau
2. Rp 7.000.000/peserta (early bird, 1 minggu  membayar sebelum training )  atau
3. Rp 6.750.000/peserta ( peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Training CD contains training material
3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by Training Provider  team / instructor
4. Certificate
5. Stationeries: NoteBook and Ballpoint
6. Jacket or waistcoat
7. Bag or backpackers
8. Training Photo
9. Training room with full AC facilities and multimedia
10. Qualified and experienced instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

cforms contact form by delicious:days

Hotel IBIS Yogyakarta | 21-23 Februari 2012 | 08.00 – 16.00 WIB | Rp. 6.500.000 per peserta

 Description

A process safety management (PSM) is a part of safety management and engineering system. The PSM system aims to ensure that technology facilities such as chemical plants, refineries, gas processing plants and offshore drilling platforms and so high-risk industries have access to safe design and operation. This system is focused on prevention of major technological accidents such as: fire, explosion and leakage of toxic chemicals. They also is a management control process that includes plans, procedures, audit and evaluation for handling hazardous substances, these controls will contribute to help for identify, understand and control process hazards.
The PSM is not provided for management and the employees and contractors under workers management procedures, this is an executive tools for everyone involved. All stakeholders such as; managers, employees and contractors workers are responsible for the successful implementation the PSM. This system is started early in design stage, but they continuously improvement as well as technology changes.

Materi 

On Successful completion of this program the participant will be able to:

• Learn the core concepts of fundamental Process Safety Management system & application in industry
• Understand how to modify & improve the existing Process Safety Management system without avoid the safety and business aspects
• Learn how implement the tools of cost effective system as a basic to control production program
• Have a detailed knowledge of the optimization of safety practices, in order to maximize facility and minimize risk with identify, understand and control process hazards.

Course Outline 

Day -1
1. PSM Fundamental

• PSM Issues
• Incident Losses
• PSM Model
• PSM & Operational Excellence

2. PSM Process

• Incident Causation & PSM
• Safety management System & PSM
• Process Safety Management System
• PSM Elements

3. Workshop: Incident Causation Analysis
4. PSM Element I

• Process Safety Information
• Process Hazard Analysis
• Pre-startup Safety Review
• Mechanical Integrity

Day -2
1. PSM Element II

• Employee Participation, Contractors and Training
• Operating Procedures and Hot Work Permits
• Management Of Change
• Incident Investigation and Emergency Planning and Response

2. Process Hazard Analysis Methodology 1

• Introduction
• Safety Review, Checklist Analysis and Preliminary Hazard Analysis
• What – if Analysis and Hazops
• Failure Modes and Effect Analysis and Fault Tree Analysis

3. Workshop 2 : Hazard Analysis
4. Process Hazard Analysis Methodology 2

• Introduction to Quantitative Risk Assessment
• Likelihood or Probability Analysis
• Impact Analysis
• Risk Matrix and Risk Acceptability Criteria

Day – 3
1. Incident Investigation

• Introduction
• Basic Investigation Techniques
• Incident Investigation Process and System
• Incident Investigation Recommendation

2. PSM Audit

• Basic Principles
• Management Control System
• PSM Audit Process and Activates
• PSM Audit Scoring

3. Workshop 3 : Safety Audit
4. PSM Implementation

• PSM Implementation Process
• PSM Implementation Key Success Factors
• Final Remark

Metode

• Presentation
• Discussion
• Casestudy
• Evaluation

Participans

• Safety Manager/Superintendent/Engineer/Planner/Supervisor
• Project, Maintenance Engineer
• Process & Manufacturing/Engineer
• Production Planner/Engineer/PPIC/Operation Engineer
• Professionals

Instructor

Ir. Widodo Haryono, Amd, ST, M.Kes.
Instruktur merupakan tenaga ahli bidang pengawasan pelaksanaan safety dari dinas Tenaga Kerja propinsi DIY.

Facilities

• Module / Handout
• Training Kit
• Soft Copy Materi
• Coffe Break & Lunch
• Souvenir
• Sertificate

Time & Venue

• Tanggal : 21-23 Februari 2012 (3 days training)
• Pukul : 08.00 – 16.00 WIB
• Tempat : Hotel All Season Yogyakarta

Course Fee

• Rp. 6.500.000 per peserta (Non Residential),
• Minimum 3 orang peserta

cforms contact form by delicious:days

Description

Kesadaran akan pentingnya pencegahan kebakaran dan penanggulangan dini terhadap bahaya kebakaran, dalam industri menjadi hal yang  sangat mendasar dan diperlukan mengingat potensi bahaya kebakaran di dalam dunia industri sangat besar. Ketersediaan Fire Prevention & Protection yang handal menjadi syarat mutlak terhadap perlindungan personel dan berbagai asset perusahaan baik yang ada dalam pabrik (plant) maupun dalam gedung perkantoran.

Implementasi teknologi khususnya bidang engineering (rekayasa) untuk mendukung Fire Prevention & Protection  telah banyak memberikan kemajuan yang significant guna memperoleh sistem keamanan dan keselamatan kerja untuk mencegah kebakaran, controlling, investigasi dan monitoring potensi bahaya kebakaran.

Dalam pelatihan ini, peserta akan diberikan ketrampilan terkait dengan Fire Prevention & Protection mulai dari desain, analisis, implementasi teknologi dan perawatan sistem proteksi yang ada. Dengan mengikuti pelatihan ini peserta akan memahami pentingnya upaya pencegahan kebakaran dan mengetahui sistem proteksi kebakaran yang handal bagi perusahaannya masing-masing.

 Tujuan

Pelatihan ini diselenggarakan dengan tujuan :

1. Memberikan pengetahuan tentang berbagai potensi bahaya kebakaran dalam dunia industri dan bagaimana cara mencegah dan menanggulanginya.
2. Memberikan gambaran Fire Prevention & Protection yang handal dan paling sesuai dengan kebutuhan perusahaan
3. Memberikan ketrampilan untuk mengembangkan analisis kebutuhan sistem proteksi, desain sistem proteksi dan peningkatan kinerja sistem proteksi kebakaran.
4. Memberikan ketrampilan untuk melakukan perawatan dan trouble shooting sistem proteksi kebakaran yang sudah ada

Materi

• Pengantar K3 Kebakaran
• Introduction to Fire Prevention & Protection System
• Fire Protection Engineering (FPE)
• Active Fire Protection Systems
• Fire Detection and Alarm Systems (Smoke, Heat, Flame and Flammable Vapor Detectors, etc)
• Fire Extinguishers (Portable and Fixed)
• Wet Systems (Sprinkler, Wet Riser, Hose Reel, Hydrant)
• Passive Fire Protection Systems
• Designing An Effective Fire Detection and Protection System for Production Facilities
• Design of A Pumping System for A Hose Reel System
• Design of A Sprinkler Installation for A Typical Building’
• Fire Prevention & Fire Prevention Techniques
• Operations and Maintenance for Fire Protection Systems
• Fire Risk Assessment and Audit Techniques
• Development of Fire Emergency Procedure
• Pengantar K3 Kebakaran

Participans

Pelatihan ini sangat bermanfaat bagi departemen engineer khususnya para facilities engineers, plant inspector, maintenance engineers, design engineers, production and manufacturing engineers, process engineers, process designers, plant engineers dan technicians serta pihak lain yang terlibat dalam pengawasan dan pengelolaan fasilitas proses dan keselamatan kerja.

Instructor

Jamaludin Harahap, Ir., SE, M.Si

Time and Venue

• Tanggal : 20-22 Februari 2012  (3 days training)
• Pukul     : 08.00 – 16.00 WIB
• Tempat  : Hotel IBIS Yogyakarta

Course Fee

• Rp 7.000.000 per peserta (Non Residential), minimal pendaftaran untuk 3 peserta

Facilities

• Module / Handout
• Training Kit
• Soft Copy Materi
• Coffe Break & Lunch
• Souvenir
• Sertificate

cforms contact form by delicious:days

Golden Flower Hotel, Bandung | 29 Oct – 01 Nov 2012 | 08:00 – 16:00 | Rp 7.500.000,-

PENDAHULUAN :

Safety merupakan suatu kondisi bebas dari cedera atau bahaya atau suatu perasaan takut akan terjadi kecelakaan, cedera maupun resiko bahaya. Health merupakan suatu kondisi sehat secara fisik maupun mental ataupun sosial. Environment Suatu keadaan sekeliling tempat kerja/organisasi/perusahaan beroperasi. Tujuan dari HES adalah untuk menciptakan lingkungan kerja yang sehat, aman, sejahtera dan produktif serta penyerasian lingkungan di dalam maupun di sekitar organisasi. Sistem manajemen HES yang menunjang keberhasilan usaha manufaktur adalah berbasis PDCA (plant, do, check, dan action).

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Production System Safety.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang production system safety pada industri rekayasa.

TUJUAN TRAINING :

Setelah  mengikuti pelatihan ini peserta diharapkan memiliki pemahaman lebih tentang pengetahuan production system safety.

CAKUPAN MATERI TRAINING :

1.   Konsep dasar production system safety.

• Pengertian, tujuan program HES, sistem produksi dan siklus fungsi produksi, faktor yang mempengaruhi keberhasilan kerja, sistem manajemen HES dan tujuannya, dasar hukum sistem manajemen HES.

2.   Elemen dasar sistem manajemen HES berbasis ISO.

• Pembangunan dan pemeliharaan komitmen
• Strategi pendokumentasian
• Peninjauan ulang rancangan (design) dan kontrak
• Pengendalian dokumen
• Pembelian
• Keamanan bekerja berdasarkan SMK3
• Standar pemantauan
• Pemantauan dan perbaikan kekurangan
• Pengelolaan material dan pemindahannya
• Pengumpulan dan penggunaan data
• Pemeriksaan sistem manajemen
• Pengembangan keterampilan dan kemampuan

3.   Alat pelindung diri

• Pengertian, syarat, klasifikasi, faktor-faktor yang harus dipertimbangkan,

4.   Peraturan perundangan sistem manajemen HES

• Dasar hukum, Undang-undang 13/2003, UU NO. 14 Tahun 1969 tentang pokok mengenai tenaga kerja, UU NO.1 Tahun 1970 tentang keselamatan kerja, UU NO. 23 Tahun 1992 tentang kesehatan, PERMENNAKER 05/MEN/1996 tentang sistem manajemen K3, PERMENNAKER NO. PER-04/MEN/1987 tentang panitia pembina keselamatan dan kesehatan kerja serta tata cara penunjukan ahli keselamatan kerja, PERMEN 02/M/1992 tentang tata cara penunjukkan, kewajiban dan wewenang ahli K3.

Trainer

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

INVESTATION PRICE/PERSON :

• Rp 7.500.00 Grou0,- Full fare:
• Rp 7.250.000,- Early bird, payment 1 week before Training
• Rp 7.000.000,- Forp, min 3 person from 1 company

FASILITAS UNTUK PESERTA :

1. Modul Training
2. Flash Disk berisi materi training
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Tas
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10. Instruktur yang Qualified
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta

cforms contact form by delicious:days

Yogyakarta | 10 – 13 April 2012 | Rp 7.000.000,- /participant (non residensial)

DESKRIPSI

Sebagaimana diketahui bahwa Pesawat Angkat dan Angkut adalah suatu peralatan yang sangat berguna bagi proses industri khususnya dalam pemindahan barang. Pesawat Angkat dan Angkut merupakan peralatan teknik yang mengandung resiko bahaya tinggi yang dapat menyebabkan terjadinya kecelakaan kerja bilamana tidak ditangani secara baik dan benar.

Agar tidak terjadi kecelakaan kerja, maka sebelum pemakaian setiap Pesawat Angkat dan Angkut dan pengaman / perlengkapannya harus dilakukan pemeriksaan dan pengujian serta dioperasikan oleh seorang operator yang berkemampuan dan berketrampilan yang cukup serta dirawat dengan baik dan teratur.

Berdasarkan Undang-Undang No.1 Tahun 1970 tentang Keselamatan Kerja dan peraturan pelaksanaannya pada Permen No.4/MEN/85 tentang Pesawat Angkat dan Angkut (misal: forklift, backhoe, loaders, excavators, cranes), mewajibkan perusahaan mempunyai Ahli K3 agar pelaksanaan K3 di tempat kerja berjalan optimal. Pelatihan Ahli K3 Alat-Alat Berat dirancang untuk memenuhi kebutuhan operasional perusahaan menuju produktivitas dan efisiensi untuk meningkatkan daya saing perusahaan.

Sehubungan dengan hal tersebut Kami  sebagai perusahaan PJK3 yang ditunjuk oleh DEPNAKERTRANS RI akan mengadakan “Pelatihan Ahli K3 Alat Berat (Excavator, Loader, Buldozer)”, bekerja sama dengan DEPNAKERTRANS RI untuk memenuhi standart perusahaan akan pemenuhan kebutuhan Ahli K3 khususnya pada alat-alat berat.

Tujuan:

Setelah selesai mengikuti pelatihan dan lulus ujian, peserta akan mengetahui tugas dan kewajiban dalam melaksanakan persyaratan, sistem dan proses K3 di tempat kerja sesuai dengan peraturan dan perundang-undangan di bidang Kesehatan Keselamatan Kerja ( K3) yang berlaku.

Materi:

Materi pelatihan yang akan disampaikan meliputi sebagai berikut:

1. Pengetahuan dasar alat-alat berat
2. Pengetahuan tenaga pengerak dan hidrolik
3. Perangkat Keselamatan Kerja ( Safety devices)
4. Faktor-faktor yang mempengaruhi beban kerja aman
5. Pengoperasian aman
6. Perawatan dan pemeriksaan harian
7. Ujian Teori
8. Praktek

Persyaratan peserta:

Pelatihan ini perlu diikuti para praktisi K3, supervisor, anggota P2K3 dll. Dengan persyaratan minimal D3 atau sederajat dengan ketentuan pengalaman kerja minimal 2 tahun

Persyaratan Peserta :

1. Membawa Foto Copy Kartu Identitas
2. Membawa Surat Rekomendasi dari Perusahaan
3. Membawa Pas Foto 4×6, 2×3 masing-masing 3 lembar (background merah)

Instruktur:

• Depnaker Pusat dan Tim
• Pejabat Depnakertrans RI & Ditjen Binwasnaker
• Akademisi & Praktisi di bidang alat berat.

Metode:

• Presentasi
• Diskusi & Studi Kasus
• Kunjungan Lapangan
• Ujian Akhir
• Evaluasi

Waktu dan tempat:

• Yogyakarta
• 10 – 13 April 2012
  
• 08.00– 16.00 WIB

Investasi:

• Rp 7.000.000,- /participant (non residensial)*
• Special Rate: Rp 5.950.000,- (non residensial – min 5 participants from the same company)

Fasilitas:

• Module / Handout
• Training Kit
• Coffe Break & Lunch
• Souvenir
• Sertifikat & SKP dari Depnakertrans RI

SERTIFIKAT & KOMPETENSI KELULUSAN

Kepada peserta yang lulus diberikan sertifikat pelatihan Ahli K3 Alat Berat dari Depnakertrans dan Penunjukan Ahli K3 yang dikeluarkan oleh Depnakertrans setelah memenuhi syarat

cforms contact form by delicious:days

 Ibis Hotel, Yogyakarta | 6 – 8 Maret 2012 | 08:00-16:00 WIB | Rp 5.000.000,-/ participant

Description

Di setiap tempat kerja, sudah dapat dipastikan adanya bahaya kerja yg mengancam keselamatan dan kesehatan kerja dari setiap pekerjanya. Akan tetapi kesadaran akan hal ini sering diabaikan dan dianggap tidak begitu penting oleh para pekerja sehingga sering terjadi kecelakaan dan terganggunya kesehatan para pekerja. Pelatihan ini disusun untuk memberikan pengetahuan tentang bahaya/resiko tempat kerja terhadap kesehatan kerja serta cara penanggulangan dengan maksud untuk menciptakan kondisi kerja yang aman serta nyaman. Terutama bahaya yang akan mengganggu kesehatan yang akan menimbulkan dampak dikemudian hari. Setelah mengikuti pelatihan ini para peserta memahami arti penting kesehatan dan keselamatan kerja, dapat menerapkan kondisi kerja yang aman dan nyaman, dapat mengidentifikasi bahaya terhadap kesehatan kerja serta dapat menanganinya.

Outline:

1.    HSE Management System
2.    Industrial Hygiene Overview
3.    Industrial Toxicology
4.    Physical Health Hazards

• Noise & Vibration
•  Radiation hazards: Ionizing and NIR
•  Thermal Stress
• Illumination

5.    Chemical Health Hazards
6.     Bio-hazards in the workplace: evaluation and Control
7.     Occupational Hygiene Standards:

• Term and definitions
• Voluntary vs. mandatory standards
•  Indonesian Work Environment Standards, Min of Manpower (Mandatory)
• Indonesian Work Environment Standards, Ministry of Health (voluntary)
• ACGIH TLVs
• OSHA (PELs) and British (WELs) Mandatory
• Sanitary Standards: Indonesia

8.    Principles of Controlling Health Hazards in the Workplace.
9.    Biological Monitoring.

• Introduction to Bio-monitoring;
• Exposure determinants and BEIs;
•  Lab aspects of Bio-monitoring;
• Case studies: Mercury and Solvents in the work place;

10.    Industrial Hygiene Application Programs.

• Health Risk Assessment
• Hearing Conservation Program;
• Respiratory protection program;
• Caterers Hygiene
• Domestic Sanitation

11.    Industrial Hygiene Survey

• Walk through survey
• Investigative Survey: Sampling and Measurements

Who Should Attend

Pelatihan ini sangat sesuai diikuti oleh para manajer lini, supervisor, laboratorium, kesehatan, safety dan yang berhubungan dengan lingkungan.

Instruktur :

H. Heru Subaris Kasjono, SKM, M.Kes.
(Aktif sebagai narasumber pada berbagai kegiatan training safety, khususnya pada bidang kesehatan lingkungan kerja)

Course Method

• Presentation
• Discuss
• Case Study
• Post Test
• Evaluation

Fee

Rp 5.000.000,- /participant (non residensial)*

Special Rate:

Rp 4.500.000,- (min 5 participants from the same company)

Note:  All training classes will have a minimum of 5 participants to be held as scheduled.

Waktu dan Tempat Pelaksanaan :

• 6 – 8 Maret 2012
• Ibis Hotel Yogyakarta

cforms contact form by delicious:days

Yogyakarta | 13 – 15 Maret 2012 | 08:00-16:00 WIB | Rp 5.000,000,-/peserta
Yogyakarta | 05 – 07 Juni 2012 | 08:00-16:00 WIB | Rp 5.000,000,-/peserta

Description

Keracunan makanan sebagai akibat penanganan bahan makanan yang salah dapat menimbulkan gangguan produktifitas kerja, dengan akibat timbulnya kerugian yang tak terbayangkan bagi perusahaan. Selain menimbulkan permasalahan kesehatan yang memakan biaya tidak sedikit, terhentinya produksi perusahaan baik karena sebagian pekerjanya sakit ataupun pekerja lain yang berhenti bekerja karena harus menolong korban, timbulnya permasalahan dari gugatan berkaitan dengan hukum dan menurunnya reputasi perusahaan, merupakan sumber kerugian lain bagi perusahaan.

Untuk mencegah terjadinya hal seperti itu, maka sudah saatnya dilaksanakan usaha-usaha untuk meningkatkan kemampuan dan pengetahuan bagi pelaksana penyaji/pengelola makanan (foodhandler) yang dalam hal ini berperan sebagai ujung tombak.

Tujuan :

Pelatihan ini bertujuan meningkatkan kemampuan dan pengetahuan akan penanganan makanan secara benar, dimulai dari penanganan bahan baku sampai kepada pengolahan dan penyajiannya

Outline:

Adapun garis besar materi yang akan disampaikan dalam pelatihan ini adalah:

1. Introduction to Food Safety
2. Peraturan perundangan yang terkait: UU Nomor 23/1992 tentang Kesehatan & Kepmenkes Nomor 715/Menkes/SK/V/2003 tentang Persyaratan hygiene sanitasi Jasaboga
3. Bahan Pencemar Terhadap Makanan
4. Penyakit bawaan makanan
5. Prinsip Higiene Sanitasi (Sanitasi Makanan & Minuman, Higiene Perorangan, Higiene Sanitasi Tempat Pengolahan Makanan (TPM), Pemeliharaan Kebersihan Lingkungan
6. Aspek Kesehatan Penjamah Makanan
7. Proses masak memasak makanan,
8. Pengendalian Mutu Mandiri / HACCP
9. Supervisi Kantin dan Outbreak Investigation (MERP)
10. Audiovisual : Keamanan PanganSistem proteksi aktif (APAR, Hidran, dll)

Who Should Attend

Peserta pelatihan adalah Manajer HRD, Penanggung jawab HSE, Dokter / Paramedik di Perusahaan, General Services, & siapa saja yang berminat.

Instruktur :

Dra. Alin Dewi Retno W, Apt. MM
H. Heru Subaris Kasjono, SKM, M.Kes.

• Instruktur merupakan praktisi di bidang Industrial Health, khususnya di masalah pengolahan pangan, tentang penanganan dan pengawasan langsung terhadap keamanan pangan di perusahaan yang bergerak di bidang pengolahan pangan.
• Aktif mengisi pelatihan tentang Industrial Health, Penanganan dan Pengawasan Food Safety, dll di perusahaan/instansi, yang nantinya langsung diterapkan di perusahaan.

Course Method

• Presentation
• Discuss
• Case Study
• Evaluation
• Simulation

Fee:

Rp 5.000.000,- /participant (non residensial)*

Special Rate:

Rp 4.500.000,- (min 3 participants from the same company)

Waktu dan Tempat Pelaksanaan :

•   10 – 12 Januari 2012 (3 days training)
• MM UGM Hotel
• Jl. Colombo No. 1 Yogyakarta

cforms contact form by delicious:days

Hotel MM UGM, Yogyakarta | 6 – 8 Februari 2012 (3 days training) | Rp 6.500.000,- /participant (non residensial)

DESKRIPSI
Kesadaran akan pentingnya pencegahan kebakaran dan penanggulangan dini terhadap bahaya kebakaran, dalam industri menjadi hal yang sangat mendasar dan diperlukan mengingat potensi bahaya kebakaran di dalam dunia industri sangat besar. Ketersediaan Fire Protection Inspection, Testing & Maintenance yang handal menjadi syarat mutlak terhadap perlindungan personel dan berbagai asset perusahaan baik yang ada dalam pabrik (plant) maupun dalam gedung perkantoran.
Implementasi teknologi khususnya bidang engineering (rekayasa) untuk mendukung Fire Protection telah banyak memberikan kemajuan yang significant guna memperoleh sistem keamanan dan keselamatan kerja untuk mencegah kebakaran, controlling, investigasi dan monitoring potensi bahaya kebakaran.
Dalam pelatihan ini, peserta akan diberikan ketrampilan terkait dengan Fire Protection mulai dari desain, analisis, implementasi teknologi dan perawatan sistem proteksi yang ada. Dengan mengikuti pelatihan ini peserta akan memahami pentingnya upaya pencegahan kebakaran dan mengetahui sistem proteksi kebakaran yang handal bagi perusahaannya masing-masing.

TUJUAN
Pelatihan ini diselenggarakan dengan tujuan :

• Memberikan pengetahuan tentang berbagai potensi bahaya kebakaran dalam dunia industri dan bagaimana cara mencegah dan menanggulanginya.
• Memberikan gambaran Fire Prevention & Protection yang handal dan paling sesuai dengan kebutuhan perusahaan
• Memberikan ketrampilan untuk mengembangkan analisis kebutuhan sistem proteksi, desain sistem proteksi dan peningkatan kinerja sistem proteksi kebakaran.
• Memberikan ketrampilan untuk melakukan perawatan dan trouble shooting sistem proteksi kebakaran yang sudah ada.

MATERI PELATIHAN

1. Introduction to Fire Protection Inspection, Testing & Maintenance
2. Active Fire Protection Systems
3. Fire Detection and Alarm Systems (Smoke, Heat, Flame and Flammable Vapor Detectors, etc)
4. Fire Extinguishers (Portable and Fixed)
5. Wet Systems (Sprinkler, Wet Riser, Hose Reel, Hydrant)
6. Passive Fire Protection Systems
7. Designing An Effective Fire Detection and Protection System for Production Facilities
8. Design of A Pumping System for A Hose Reel System
9. Design of A Sprinkler Installation for A Typical Building
10. Fire Prevention & Fire Prevention Techniques
11. Operations and Maintenance for Fire Protection Systems
12. Fire Risk Assessment and Audit Techniques
13. Development of Fire Emergency Procedure

PESERTA
Pelatihan ini sangat bermanfaat bagi engineer yakni bagi facilities engineers, maintenance engineers, design engineers, production and manufacturing engineers, process engineers, process designers, plant engineers dan technicians serta pihak lain yang terlibat dalam pengawasan dan pengelolaan fasilitas proses dan keselamatan kerja.

COURSE METHODS
Presentation
Discuss
Case Study
Evaluation

COORDINATOR
Widodo Hariyono, A.Md., S.T., M.Kes.
(Merupakan praktisi bidang Safety yang berpengalaman sebagai instruktur dalam memberikan materi-materi yang berkaitan dengan bidang K3 di berbagai perusahaan Nasional.)

TIME & VENUE

• Hotel MM UGM Yogyakarta
• Jl. Colombo No 1 Yogyakarta
• 6 – 8 Februari 2012
• 08.00 – 16.00 WIB

COURSE FEE

• Rp 6.500.000,- /participant (non residensial)*
• Special Rate: Rp 6.000.000,- (min 4 participants from the same company)

cforms contact form by delicious:days

Description

Tingginya tingkat kompetisi dunia industri menumbuhkan paradigma baru tentang keselamatan dan kesehatan kerja sebagai aspek yang cukup dipertimbangkan. Pelaksanaan K3 merupakan indikator tingkat kesejahteraan tenaga kerja dan berkorelasi langsung dengan kualitas tenaga kerja, peningkatan produktivitas dan pertumbuhan ekonomi. Sejalan dengan kebijakan pemerintah dengan diterapkannya Permenaker No. 04 tahun 1987 tentang Panitia Pembinaan Kesehatan dan Keselamatan Kerja (P2K3), UU No. 13 tahun 2003 tentang penyelenggaraan Sistem Manajemen K3 (SMK3) dan UU No. 1 tahun 1970 tentang ketenagakerjaan.Kami sebagai perusahaan PJK3 yang ditunjuk oleh DEPNAKERTRANS RI menyelenggarakan Pelatihan Ahli K3 Umum. Tersedianya Ahli K3 Umum di Industri diharapkan mampu mengawasi pelaksanaan peraturan perundangan K3 di industri dan mampu memberikan peran optimal dalam organisasi perusahaan dalam mengendalikan resiko kecelakaan kerja.

Tujuan training :

• Menjelaskan tugas, wewenang dan tanggungjawab Ak3.
• Menjelaskan hak pekerja dalam bidang K3
• Menjelaskan kepada pengusaha bahwa upaya K3 menguntungkan bagi perusahaan.
• Menjelaskan tujuan sistem manajemen K3 (SMK3)
• Menjelaskan sistem pelaporan kecelakaan
• Menganalisa kasus kecelakaan, mengetahui faktor penyebabnya dan dapat menyiapkan laporan kecelakaan kepada pihak terkait
• Mengenal P2K3, tugas, tanggungjawab dan wewenang organisasi ini.
• Mengenal pembinaan dan pengawasan K3 ditingkat perusahaan, Nasional dan Internasional.
• Mengidentifikasi objek Pengawasan K3
• Mengetahui Persyaratan dan pemenuhan tehadap peraturan perundangan di tempat kerja.
• Mengetahui persyaratan keselamatan dan kesehatan kerja di tempat kerja.
• Mengetahui proses audit dan ruang lingkupnya untuk mengukur tingkat pencapaian

Competencies

• Mempersiapkan dan menghasilkan tenaga ahli K3 Umum yang dapat melakukan indentifikasi, evaluasi, pengendalian resiko dalam pelaksanaan K3.
• Mempersiapkan tenaga pelaksana yang mampu melaksanakan K3 umum di tempat kerja.
• Mempersiapkan dan menghasilkan tenaga pelaksana yang mampu menjelaskan teknik pencegahan dan penanggulangan kecelakaan kerja.
• Mempersiapkan tenaga ahli yang dapat mengelola dan menjalankan organisasi P2K3]

Materi

Materi Training :

1. Kebijakan Nasional
2. Undang-undang No.1 Tahun 1970
3. Dasar-dasar K3
4. Pengawasan K3 Pesawat Uap
5. Pengawasan K3 Bejana Tekan
6. Pengawasan K3 Pesawat Mekanik
7. P3K3
8. Kelembagaan / Keahlian
9. SMK3 dan Audit SMK3
10. Pengawasan K3 Keselamatan Kerja
11. P3K
12. Laporan Kecelakaan
13. Manajemen Resiko
14. Pengawasan K3 Kontruksi Bangunan
15. Pengawasan K3 Kebakaran
16. Pengawasan K3 Listrik
17. Pengawasan K3 Lingkungan
18. PKL
19. Studi kasus & Evaluasi

Peserta

Pelatihan ini sangat tepat untuk diikuti oleh pegawai pada berbagai departemen yang telah bekerja sekurang-kurangnya dua tahun.atau lebih

Persyaratan Peserta :

1. Membawa Foto Copy Kartu Identitas
2. Membawa Surat Rekomendasi dari Perusahaan
3. Membawa Pas Foto 3 x 4 empat lembar (background merah)

Instruktur :

Drs Iswantoro, MM & Team

Instruktur pelatihan ini akan disampaikan oleh tenaga ahli K3 dari Disnakertrans RI dan Tenaga Ahli dari kalangan industri yang telah berpengalaman dalam memberikan pelatihan-pelatihan K3

Sertifikat
Bagi peserta yang memenuhi kriteria kelulusan baik teori maupun praktek akan diberikan sertifikat dari pihak terkait.

Biaya :

• Rp.7.500.000 per peserta (Non Residential),
• Special Rate Rp.6500.000 (Non Residential Minimal 5 Peserta dari perusahaan yang sama)

Waktu dan Tempat Pelaksanaan :

• 26 Maret s.d 5 April 2012
• 08.30 – 16.00 WIB
• Yogyakarta, Jl. Patangpuluhan no 26 Yogyakarta

Fasilitas

1. Module / Handout
2. Sertifikat SK Penunjukan Ahli K3 Umum
3. Lencana dari Depnakertrans
4. Training Kit
5. Soft Copy Materi
6. Coffe Break & Lunch
7. Souvenir

cforms contact form by delicious:days

Yogyakarta | 13 Februari 2012 | 08.00 – 16.00 WIB | Rp 3.000.000,- (Non resindential)

Description

Tingginya tingkat kompetisi dunia industri menumbuhkan paradigma baru tentang keselamatan dan kesehatan kerja sebagai aspek yang cukup dipertimbangkan. Pelaksanaan K3 merupakan indikator tingkat kesejahteraan tenaga kerja dan berkorelasi langsung dengan kualitas tenaga kerja, peningkatan produktivitas dan pertumbuhan ekonomi. Sejalan dengan kebijakan pemerintah dengan diterapkannya Permenaker No. 04 tahun 1987 tentang Panitia Pembinaan Kesehatan dan Keselamatan Kerja (P2K3), UU No. 13 tahun 2003 tentang penyelenggaraan Sistem Manajemen K3 (SMK3) dan UU No. 1 tahun 1970 tentang ketenagakerjaan.

Oleh karena itu, Kami sebagai perusahaan PJK3 yang ditunjuk oleh DEPNAKERTRANS RI akan menyelenggarakan Refresh & Perpanjangan SKP Ahli K3 Umum untuk memenuhi kebutuhan perusahaan dalam hal Kesehatan & Keselamatan Kerja.

PERSYARATAN PESERTA

Peserta yang akan mengikuti pelatihan ini adalah mereka yang pernah mengikuti pelatihan AK3 Umum & akan memperpanjang SKP AK3 Umum.

Sebagai persyaratan agar setiap peserta membawa dan menyerahkan :

1. Surat permohonan perpanjangan Ahli K3 umum yang ditujukan kepada: Direktur Pemberdayaan Pengawasan Ketenagakerjaan, Direktorat Jenderal Pembinaan Pengawasan Ketenagakerjaan Depnakertrans R.I. Jl. Jend. Gatot Subroto Kav. 51 Jakarta Selatan.
2. Photo copy Surat Keputusan Penunjukan/SKP yang bersangkutan
3. Laporan kegiatan Ahli K3 yang bersangkutan (laporan kegiatan akan di presentasikan dalam pelatihan).
4. Mengisi biodata
5. Photo berwarna background merah ukuran 4 x 6 cm  & 2×3 sebanyak 3 lembar

Instruktur :

Instruktur pelatihan ini akan disampaikan oleh tenaga ahli K3 dari Depnakertrans RI

Course Method

• Presentation
• Discuss
• Case Study
• Evaluation
• Simulation

Fee:

Rp 3.000.000,- /participant (non residensial)*

Waktu dan Tempat Pelaksanaan :

• 13 Februari 2012
  
• 08.00 – 16.00 WIB
• Jl. Patangpuluhan 26 Yogyakarta

Fasilitas :

1. Module / Handout
2. Training Kit
3. Coffe Break & Lunch
4. Perpanjangan SKP dari Depnaker

cforms contact form by delicious:days