Informasi Training - Iklan Training - Pelatihan - Workshop » Industry Specific Skills

Slurry transport in dredging and wet mining

admin3 — Thu, 09 Feb 2012 04:57:46 +0000

Slurry transport in dredging and wet mining

Yogyakarta | 04-07 June 2012 | IDR 7,000,000.00 per participant
Yogyakarta | 01-04 October 2012 | IDR 7,000,000.00 per participant

DESCRIPTION
Pumping slurry is a complex and important process. In this advanced, a course emphasis is put on the hydraulic transport of solids-water mixtures with centrifugal pumps and through pipeline systems and participants will be familiarised with all aspects of pumps and slurry transport and their relation to dredging operations and production calculations in practice.

WHO SHOULD ATTEND
This course aims to provide the participants with understanding of all important phenomena and therefore the dos and don’ts of slurry transport in dredging and wet mining and enables the participants to perform basic calculations. The course introduces participants to fundamental fluid mechanic theories.

SUMMARY OUTLINE
1. Introduction to slurry transport
2. Soil characteristics
3. Water flow in pipelines
4. Pump characteristic
5. Pump and pipeline charcteeristics combined
6. Drives
7. Mixture flow in pipelines
8. Pipe line characteristic with mixtures
9. Pump characteristc with mixture
10. Construction of the dredging pump
11. Wear
12. Production calculations

COURSE METHOD

Presentation
Discuss
Case Study
Evaluation
Simulation

TIME & VENUE

Yogyakarta,
04-07 June 2012
01-04 October 2012
4 days (08 am – 04 pm)

COURSE SPEAKER

Teguh Pudji Purwanto, Ir, MT
Teguh Pudji Purwanto experienced more than 26 years in mechanical industry.

COURSE FEE
IDR 7,000,000.00 per participant non residential

FACILITY

Module / Handout
Certificate
Souvenir
Training Kit

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

COALBED METHAN

Admin2 — Tue, 07 Feb 2012 00:56:16 +0000

COALBED METHAN

COALBED METHAN

Course is designed to help attendees understand CBM production and assess CBM exploration and development opportunities. The purpose of this course is to provides delegates with practical insights and tools to efficiently identify, appraise, and develop this type of reservoirs.

The course will review the origin and mechanisms of CBM production, discuss the various techniques used to analyze reservoir parameters and performance, and understand how these have been applied to numerous projects. Exercises in rock description, log correlation, and resource estimation will emphasize

key points. Participants will analyze case histories to determine the effectiveness of different appraisal and development strategies and why projects succeeded or failed.

Course Outline:

The Overview of Technical Aspect of CBM Business

Introdduction to Coal Bed Methane ( CBM )
Development of CBM: National and International spectrum
CBM as a Reservoir
Method of Drilling and Production
Design of Gas Transmission Pipeline
Design of Crude, Oil, and Produced Water Transportation Pipeline
HSE Aspect of CBM Explotations
National development of CBM
Economic Aspect and Project Calculation for CBM

The Contractual, Legal, and Financial Aspect of CBM Business

Understanding the Mechanism of PSC and CBM Contract
Introduction: Financial Influences and Non Financial Divisions
CBM & Petroleum Business in Brief: Global Competitiveness
Nature of the Oil and Gas Industry and Business Process
CBM Operation in Brief
General Petroleum Including CBM Accounting and Taxation
The Philoshopy of PSC
Cost Recovery
CBM Contract, PSC, & Business Process
PSC & CBM Contract: Procedure in Practice
PSC & CBM Contract :Term & Application
PSC & CBM Contract: Calculation
PSC & CBM Contract: Financial Budgeting & Reporting
Understanding the PSC Key Performance and sensitivity

Due Dilligence:

Gas Content Analysis
Gas content Quality Control
Measuring and Changing Permeability
Net Coal
Gas Composition Changes
Isotherm Consideration
Reserve / Production Ratio
Development Constraint Maps

PESERTA

Technical, Legal, and Managerial Staff who need an understanding of coal bed methane production and CBM Exploration and development opportunities

Instructor

DR. Sudarmoyo, ST, MSc. & team

WAKTU & TEMPAT

Tanggal :

27-29 Februari2012
20-22 Maret 2012
09-11 April 2012
23-25 April 2012
07-09 Mei 2012
22-24 Mei 2012

Tempat : Hotel Santika Yogyakarta

COURSE FEE

Rp.8.500.000/orang(Minimum 3 orang peserta)
Rp.8.000.000 untuk pengiriman 3 peserta dari company yang sama
Rp.7.850.000 untuk pengiriman 5 peserta dari company yang sama

FASILITAS :

Module / Handout
softcopy Materi
Sertifikat
Bag or bagpackers
Training Kit
2xCoffe Break & 1 Lunch
Souvenir
Airport pickup service
Training room full AC and Multimedia
Doorprize

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

Intensive Course of Oil Gas Law

Admin2 — Mon, 06 Feb 2012 09:47:43 +0000

Intensive Course of Oil Gas Law

HARRIS Hotel – Jakarta | 7-8-9 March 2012 |09.00 – 16.00 WIB | IDR.5.500.000

This intensive Course of Oil & Gas Law constitutes a comprehensive course to deepen our knowledge in legal aspects of oil & gas industry. This Workshop will be held in Indonesian language and presented by the combination of oil and gas law experts and government officer who have handled case and involved in oil and gas industry for many years. This Course is designed to be presented intensively in order to provide deep understanding to all participants about oil & gas industry and the development of relevant laws and regulation.

After the Course, the participant will be expected to have legal skill in order to understand legal aspect of oil & gas including understanding of:

(i) many kinds of common contract in oil and gas industry (TAC, PSC, JOB, JOA, EOR);
(ii) the role and authority of Oil and Gas regulating Body (i.e. BP Migas and BPH Migas;
(iii) how to proceed a mining area of oil and gas;
(iv) various obligations of the contractor to the government;
(v) characteristic of upstream and downstream activities (exploration, exploitation, processing, transportation, storage and trading);
(vi) relinquishment activities, land clearing;
(vii) cost recovery, AFE, Work Program and Budget, P.O.D, ROW;
(viii) technique to acquire license to borrowing and use of forestry area (Ijin Pinjam Pakai Kawasan Hutan)
(ix) various regulations and critical issues to be understood in conducting legal audit; and
(ix) various restrictions and regulations to conduct merger and acquisition.

Outline

Wednesday, 7 March 2012

Basic Knowledge of Petroleum Industry for Non Engineers

Session 1

(09.00 – 12.00)

To understand the process of petroleum production and kind of product derived from oil;

To know the common term used in this field such drilling, well, reservoir etc.;

To provide little bit knowledge in relation with the stage of exploration and exploitation of oil & gas.

DR. Ir. Sudjati Rachmat

(Mining Consultant)

Legal Aspect in Relation to Oil & Gas Mining

Session 2

(13.00 – 16.00)

a. To understand the characteristic of upstream and downstream activities which are includingi:eExploration, exploitation, processing; carriage; storage and marketingb. to understand all kinds of obligation of contractor to the Government including exploration and exploitation royalties, profit sharing amount and taxation.

c. to understand a processing to participate in working area tender.

d. understanding of the obligation in relation with relienquisment of working area for contractor of oil & gas.

e. to understand the concept of cost recovery, Work Program and Budget, AFE, P.O.D, ROW (right of way) (authorization financial expenditure).

f. to understand the function of BP migas

Didi Setiarto

(Senior Legal Consultant of BP MIGAS)

Thursday, 8 March 2012

Technique to Acquire License to Borrow and Use of Forestry Area

(Ijin Pinjam Pakai Kawasan Hutan)

Session 1

(09.00 – 12.00)

Technique to acquire license to borrow and use of forestry area (Ijin Pinjam Pakai Kawasan Hutan)

Ir. Hudoyo, MM

(Direktur Penggunaan Kawasan Hutan

Departemen Kehutanan RI)

Legal Audit & Legal Aspect of Acquisition in Relation with the Oil & Gas Company

Session 2

(13.00 – 16.00)

a. To understand the critical issues to be noted in relation with legal audit in oil & gas company, which are including material aspect of contract, employee, environment, financial report, asset-asset, disputes in oil & gas, participating interest, carry and repayment aspect,JOA (joint operating agreement, PROPER and others;

b. to understand requirement and restriction as well as approval to be noted in relation with the share acquisition or participating interest in oil & gas;

c. to understand relevant regulation in relation with the oil & gas company acquisition;

Akmal Muhammad Gahan

Legal Consultant of Oil & Gas

Friday,

9 march 2012

Legal Aspect of LNG

Session 1

(09.00 – 12.00

To have understanding in material legal aspect in relation with gas especially LNG

Didi Setiarto

(Senior Legal Consultant of BP MIGAS)

Session 2

(13.00 – 16.00)

To provide understanding in relation with the good and efficient CSR program in relation with petroleum industry

As’ad Nugroho SE

(CSR Consultant)

Who Should Attend

The Workshop will be expected to be attended by:

The representative of oil and gas companies
Advocate and legal consultant
Student of universities
Other participant who are interested in oil and gas industry.

Duration

Three days (09.00 – 16.00 WIB)

Time and Venue

HARRIS hotel– Jakarta
7-8-9 March 2012
Wednesday, Thursday, & Friday
(09.00 – 16.00 WIB)

Registration Fee

IDR.5.000.0000,- (before 15 february 2012)
IDR.5.500.000,- (after 15 february 2012)
IDR. 4.750.000,- 3 person in group (before 15 february)
IDR. 5.000.000., 3 person in group(after 15 february)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

Introduction to Petroleum Refinery Processing

Admin2 — Mon, 06 Feb 2012 08:55:24 +0000

Introduction to Petroleum Refinery Processing

DESKRIPSI
This training will present an overview of the modern, integrated petroleum refinery. Each refining process will be presented, covering operating description and conditions, feedstock and catalyst selection, product yields, and the relationship between process parameters, unit performance and product output and properties. Finally, future operations, including anticipated changes in crude oil and product slates will be recapped. Designed for refinery personnel seeking a thorough overview of the refining process, the course will also provide useful information to suppliers, crude oil traders, or those involved in financial assessment.

MATERI

Introduction to the Refinery Flow Sheet
Hydrocarbon Chemistry
Crude Oil: Properties, Tests, Sources, Assays
Fuel Products: Environmental Regs, Specs
Atmospheric and Vacuum Distillation
Fluid Catalytic Cracking
Catalytic Reforming and Aromatics Recovery
Isomerization, Alkylation and Polymerization
Hydroprocessing for Sulfur, Nitrogen and Aromatics Reduction
Sweetening and Sulfur Recovery
Resid Processing: Coking, Hydrocracking etc
Refinery Options for Tomorrow’s Cleaner Fuels
Future Refinery Configurations

PESERTA

This training class is designed for refinery personnel seeking a thorough overview of the refining process

KOORDINATOR

DR Ir Nur Suhascharyo. Msc

FASILITAS

Certificate, Training Kit, Module / Handout, Lunch, Coffee Break, Souvenir

METODE

Presentation,Discussion, Case Study, Evaluation, Pre-Test & Post-Test

Tempat & Tanggal :

13-15 Maret 2012 : Hotel All Season – Yogyakarta
08-09 Mei 2012 : Hotel Scarlet Dago – Bandung
25-26 September 2012 : Hotel Harris Tebet – Jakarta
27-29 November 2012 : Hotel Ibis – Semarang

Pukul : 08.00-16.00 WIB

INVESTASI

Rp. 7.500.000,- /orang

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

Contractor Safety Management System – PASTI JALAN

Admin2 — Mon, 06 Feb 2012 08:28:22 +0000

CSMS – Contractor Safety Management System

DESCRIPTION

CSMS sangat penting dalam proses pembiinaan rekanan kontraktor di perusahaan. Karena mampu memberikan disiplin bagi rekanan dalam mengaplikasikan safety dan dokumentasi. Banyak industri besar saat ini mempergunakan tenaga kerja kontraktor, outsourching untuk mendapatkan cost yang lebih efisien. Begitu juga sebaliknya hal ini menjadi tantangan tersendiri bagi para kontraktor di Indonesia untuk bias memenuhi kebutuhan pekerjaan industri pemberi kerja dengan dana yang terbatas namun dituntut dengan tingkat kualitas dan keamanan yang tinggi.

Semakin hari pekerja menjadi semakin sadar akan halnya kebutuhan keselamatan kerja tidak saja gaji yang di tuntut, tetapi kebutuhan keamanan dalam melakukan pekerjaan baik itu sebagai pekerja tetap di perusahaan induk pemberi kerja maupun pekerja kontraktor. Safety performance menjadi salah satu indikasi parameter sebuah perusahaan bisa di katakan maju dan berkembang.

Kecelakaan kerja baik yang terjadi di area perusahaan induk maupun di kontraktor perlu di evaluasi untuk bisa turunkan angka frekuensi kecelakaan kerja dengan membangun system Contractor Safety Management System (CSMS). Membangun document standard ini di butuhkan baik bagi perusahaan induk sebagai pemberi kerja maupun dari sisi kontraktor sebagai penyedia tenaga kerja, tujuannya agar system bisa berjalan dan angka kecelakaan kerja bisa di turunkan.

Sistem Manajemen Kesehatan & Keselamatan Kerja sangat mandatory untuk Contractors, Vendors dan Suppliers yang bergerak di Industri Oil & Gas. Kinerja Sistem Manajemen K3 organisasi para Contractor, Vendor dan Supplier akan diaudit terlebih dahulu sebelum mendapatkan kontrak

WHO SHOULD ATTEND

Everybody or whoever who involve in CSMS, such as:

Management Representative (MR), Contractor Representatives, end users of Company/Owners (Operations Department personnel), Contract Administrator, Services Department personnel, Procurement personnel, Operation/Production Manager
HRD Manager, Training and Development Manager

OBJECTIVE

Diharapkan setelah mengikuti training, peserta :

Mengetahui & memahami program CSMS, elemen, serta persyaratannya
Mampu menyusun document CSMS bagi kontaktor
Mampu menyusun document kebutuhan safety bagi perusahaan induk
Mampu melakukan review document CSMS yang di submit oleh kontraktor
Lebih mudah untuk meningkatkan kinerja safety baik pekerja induk maupun kontraktor
Lebih mudah dalam pelaksanaan berbagai safety program
Mampu melakukan seleksi terhadap kontraktor yang mempunyai safety program

SUMMARY OUTLINE

1. Introduksi CSMS
2. Konsep CSMS
3. Tujuan CSMS
4. Proses CSMS :

Risk Assessment
Pre – Qualification Process
Selection and Job Awarded
Pre Job Activity
Work in Progress
Final Evaluation

5. HSE Program

COURSE SPEAKER

Patisina, ST., M.Eng dan TEAM

Praktisi dan Akademisi, berpengalaman dalam membuat HES PLAN, mengerjakan beberapa proyek di swasta dan Pemerintahan dan CSMS, Memiliki sertifikasi AK3 Depnakertran RI

COURSE METHODE

Presentation
Discuss
Case Study
Evaluation
Simulation

TIME & VENUE

(Hotel IBIS) Yogyakarta,
22-24 Febraury 2012
19-21 Maret 2012
18-20 Juni 2012
4 days – 08 am – 04 pm

COURSE FEE

IDR 4,500,000.00 per participant non residential

FACILITY

Module / Handout
,Certificate
,Souvenir
,Training Kit

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

OIL TRANSPORTATION PIPING

Admin2 — Mon, 06 Feb 2012 08:07:54 +0000

OIL TRANSPORTATION PIPING

Golden Flower Hotel, Bandung | 21-24 Nov 2012 | Rp 7.250.000,-

PENDAHULUAN :

Sistem transportasi saluran pipa liquid atau petroleum yang digunakan termasuk seluruh saluran pipa pembawa minyak mentah (kasar), produk petroleum, dan gas petroleum, terminal-terminal, tempat pembersihan, pabrik gas alam, dan pesanan dan tempat penerimaan. Termasuk juga tempat penampungan fasilitas gas dari petroleum cair pada saluran pipa tertutup, fabrikasi dari pipa dan sambungan, dan penggabungan saluran beberapa fasilitas perpipaan.

Pengkodean transporatsi saluran pipa minyak meliputi disain dan pembuatan tekanan vessel, tempat penyimpanan atau tangki-tangki, saluran pipa dengan logam dengan temperatur di atas 250 oF atau di bawah – 20 oF, casing, tubing, pipe used in oil or gas wells, oil gas separtors, crude oil production tanks, saluran pipa pembersihan petroleum, transmisi gas dan pipa distribusi, disain dan fabrikasi peralatan atau instrumen, atau heat exchanger.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Oil Transportation Piping.

SIAPA SEBAIKNYA MENGHADIRI TRAINING INI ?

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang instalasi perpipaan.

TUJUAN TRAINING :

Setelah mengikuti pelatihan ini peserta diharapkan memiliki :

Pemahaman karyawan tentang pengetahuan sifat-sifat minyak
Pemahaman karyawan tentang kerugian tekanan pada pipa
Pemahaman karyawan tentang disain, pemilihan material, pembuatan dan perbaikan, pemeriksaan, dan pengetesan dari sistem transportasi minyak pada pipa.

CAKUPAN MATERI TRAINING :

Properties of oils
Friction loss in pipe
Design conditions and criteria oil transportation piping
Pressure design of piping components
Selection and limitations of piping components
Expansion, flexibility, support, and restraints
Material and dimensional requirements
Welding and installation
Inspection and test

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System. In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

VENUE :

Golden Flower Hotel, Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

21-24 Nov 2012

INVESTATION PRICE/ PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, 1 minggu membayar sebelum training ) atau
Rp 6.750.000/peserta ( peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

Training Module
Training CD contains training material
For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by Training Provider team / instructor
Certificate
Stationeries: NoteBook and Ballpoint
Jacket or waistcoat
Bag or backpackers
Training Photo
Training room with full AC facilities and multimedia
Qualified and experienced instructor
Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

OPERATION, MAINTENANCE, AND THROUBLE SHOOTING OF GAS TURBINE

Admin2 — Mon, 06 Feb 2012 07:06:30 +0000

OPERATION, MAINTENANCE, AND THROUBLE SHOOTING OF GAS TURBINE
Golden Flower Hotel, Bandung | 21-24 May 2012 | Rp 7.250.000,-

PENDAHULUAN :

A gas turbine extracts energy from a flow of hot gas produced by combustion of gas or fuel oil in a stream of compressed air. It has an upstream air compressor (radial or axial flow) mechanically coupled to a downstream turbine and a combustion chamber in between. “Gas turbine” may also refer to just the turbine element.

Energy is released when compressed air is mixed with fuel and ignited in the combustor. The resulting gases are directed over the turbine’s blades, spinning the turbine, and mechanically powering the compressor. Finally, the gases are passed through a nozzle, generating additional thrust by accelerating the hot exhaust gases by expansion back to atmospheric pressure.

Energy is extracted in the form of shaft power, compressed air and thrust, in any combination, and used to power aircraft, trains, ships, electrical generators, and even tanks.

To support the sufficient production system, we need tough worker or increase the worker skill of operation, maintenance, and trouble shooting of gas turbine profession.

PARTICIPANTS

Practitioner in the operator level, supervisor level or planner of machine maintenance technology at engineering industry, which at least senior high school or technical vocational school.

OBJECTIVE TRAINING :

To able know to operation, maintenance, and trouble shooting of gas turbine.

TRAINING MATERIAL OUTLINE :

1. Overview of Gas Turbine Technology and Applications

Simple cycle Gas Turbines; cycle considerations; applications; fuels and corrosion; emissions; combined cycle and cogeneration. Overview of Developments
High temperature turbines, reheat turbines, close cycles, and other developments.

2. Rotating Components and Matching

Brief overview of compressor and turbine design; component characteristics and matching. Compressor surge and prevention.

3. Vibration and Rotor Dynamics

A review of vibration will include specific problems such as Blade Vibration and Shaft Critical Speeds. Case histories will link vibration with the fatigue failure of components. Rotor instability, in its various forms, will be discussed. Vibration spectrum analysis will be utilised for the solution of resonance, instability, and gear and blade problems. Campbell (Spoke) diagrams and Critical Speed maps will be derived and used for the solution of vibration and Rotor Dynamic problems. The design and performance of Squeeze-Film Damper Bearings for overcoming many of the problems associated with machine unbalance and critical speeds, will be covered.

4. Combustors and Fuels

A description of combustor types, chamber design, fuel atomisation, ignition and combustor arrangements will be presented. Also discussed will be the constraints imposed by fuels on the design and operation of the hardware. The wide spectrum of fuels, both gaseous and liquid, is examined. An overview of fuel treatment and additives will be made.

5. Performance Analysis

Basic thermodynamic aspects of stationary Gas Turbines. Design and off-design operation. Influence of site effects on typical performance maps. Variable geometry compressor and turbine status.

6. Performance Analysis for Problem Detection

The fundamental concepts of performance analysis as a tool for saving energy costs are discussed. Basic and applied thermodynamics will be reviewed for gas turbines. The use of performance data to pinpoint problem areas will be discussed. Diagnostics related to fouling, nozzle erosion, bowing surge, choke, etc. will be covered. Meaningful trending methods will also be discussed.

7. Gas Path Analysis for Stationary Gas Turbines – Status

Simulation of degraded Gas Turbines, derivation and application of fault coefficient matrix, fault trees and other techniques. Implications for component life and emissions.

8. Gas Turbine Fouling

The causes, effects and detection of fouling in axial compressors will be covered including aero thermodynamic effects, effects on surge margin, intake distortion and blading problems. Filtration and control techniques will be covered.

9. Gas Turbine Repair

The techniques of inspection and repair of gas turbines are described in detail, including NDT techniques, cleaning, plating, heat treatment, welding, etc.

10. Maintenance

Case histories of various types of failures and maintenance problems of onshore and offshore gas turbine compressor installations are discussed. Maintenance techniques using bore scope and spectrum analysis including acoustic monitoring are discussed. Techniques for checking and conducting repairs on impellers, diffusers, bearings, couplings, and foundation repair are emphasised.

11. Special Considerations for CHP Gas Turbines

This section will cover special considerations in design, operation and maintenance of turbines and associated equipment on Cogeneration Services. Several cases will be covered. Off design operation effects on HRSG, STTG Cycles and evaporate cooling will be covered.

TRAINING INSTRUCTOR

Maridjo,Ir. M.Sc.

Ir. Maridjo,MT.is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, conveyor system and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balongan pertamina, PT. Indocement, some PLTA, some hotels, PT.Pupuk Kujang, PT.Bio Farma, BPPT, PT. Bintang Agung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

VENUE :

Golden Flower Hotel, Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

21-24 May 2012

INVESTATION PRICE/ PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, 1 minggu membayar sebelum training ) atau
Rp 6.750.000/peserta ( peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

Training Module
Training CD contains training material
For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by Training Provider team / instructor
Certificate
Stationeries: NoteBook and Ballpoint
Jacket or waistcoat
Bag or backpackers
Training Photo
Training room with full AC facilities and multimedia
Qualified and experienced instructor
Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

BEARING AND OIL LUBRICATION FOR MACHINERY

Admin2 — Mon, 06 Feb 2012 03:54:25 +0000

BEARING AND OIL LUBRICATION FOR MACHINERY
Golden Flower Hotel, Bandung | 23-25 Apr 2012 | Rp 5.500.000,-

PENDAHULUAN :

Pelumas merupakan darahnya mesin dan bearin (bantalan) merupakan bagian mesin yang sangat vital. Ke dua komponen tersebut tidak akan dapat dipisahkan dan sangat menentukan terjadinya kerusakan. Pemilohan standar bearing dan pelumas harus tepat karena akan menentukan life time mesin.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Bearing and Oil Lubrication for Machinery.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ?:

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang disain dan perawatan mesin pada industri manufaktur dan industri minyak.

TUJUAN TRAINING :

Setelah mengikuti pelatihan ini peserta diharapkan memiliki :

Pemahaman tentang pengetahuan karakteristik bantalan dan pelumas.
Keahlian dalam memilih bantalan, dan pelumas yang tepat sesuai dengan persyaratan.

CAKUPAN MATERI TRAINING :

1. Bantalan (Bearing)

Jenis dan sifat bantalan
Teknik merakit dan memasang bantalan
Clearance bantalan
Inspeksi bantalan
Pemilihan jenis dan umur bantalan

2. Sistem pelumasan

Macam sistem pelumasan
Pelumas dan pemakaiannya
Viskositas pelumas
Standar dan pemilihan pelumas
Standar grease dan pemakaiannya

TRAINING INSTRUCTOR

Parno Rahardjo, M.Sc.

VENUE :

Golden Flower Hotel, Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

23-25 Apr 2012

INVESTATION PRICE/ PERSON :

Rp 5.500.000/peserta (bayar penuh) atau
Rp 5.250.000/peserta (early bird, 1 minggu membayar sebelum training ) atau
Rp 5.000.000/peserta ( peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

Training Module
Training CD contains training material
For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by Training Provider team / instructor
Certificate
Stationeries: NoteBook and Ballpoint
Jacket or waistcoat
Bag or backpackers
Training Photo
Training room with full AC facilities and multimedia
Qualified and experienced instructor
Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

CONDITIONS BASE INSPECTION AND MAINTENANCE

Admin2 — Mon, 06 Feb 2012 03:32:36 +0000

CONDITIONS BASE INSPECTION AND MAINTENANCE
Golden Flower Hotel, Bandung | 31 Oct – 03 Nov 2012 | Rp 7.250.000,-

TUJUAN TRAINING :
Membekali peserta tentang wawasan dan pengetahuan perkembangan dan kebijakan perawatan, kerusakan mesin dan peralatan serta cara mengukurnya, dan kegiatan inspeksi, inspeksi untuk perawatan dan barang masuk ke gudang.

MANFAAT YANG DIPEROLEH:

Setelah mengikuti pelatihan ini, peserta diharapkan mampu:

Menjelaskan ruang lingkup perawatan
Menjelaskan keuntungan dan kerugian dari masing-masing kebijakan perawatan
Menjelaskan sumber-sumber, cara pencegahan, dan analisis kerusakan mesin dan peralatan
Menjelaskan prinsip dan tahapan perencanaan pekerjaan perawatan
Menjelaskan ruang lingkup inspeksi
Menjelaskan inspeksi pencegahan perawatan
Menjelaskan inspkesi prediksi perawatan
Menjelaskan inspeksi barang masuk ke gudang

CAKUPAN MATERI TRAINING :
1. Ruang lingkup perawatan

pengertian, peranan, tujuan, perkembangan perawatan

2. Kebijakan perawatan

breakdown, preventive, scheduled, predictive, productive maintenance

3. Kerusakan mesin dan peralatan

arti dan prinsip, sumber utama, jenis dan bentuk, penanggulangan, pola, penyebab utama, pencegahan, dan tindakan mengurangi kerusakan

4. Pengukuran kerusakan mesin dan peralatan

laju kerusakan, ukuran kinerja peralatan, distribusi waktu kerusakan, analisis data pengukuran kerusakan

5. Perencanaan perawatan

definisi dan faktor-faktor penunjang, kendala yang muncul, langkah-langkah penyusunan, dan kebijakan perencanaan perawatan, klasifikasi, persiapan, dan prinsip perencanaan perawatan, tahapan perencanaan pekerjaan perawatan, perencanaan tenaga kerja perawatan, diagram alir pekerjaan perawatan

6. Ruang lingkup inspeksi

pengertian, peranan, tujuan inspeksi, kegiatan inspeksi

7. Preventive maintenance inspection

inspection factor, preventive maintenance factor, acuan inspection

8. Predictice maintenance inspection

inspeksi manual, inspeksi minyak pelumas, inspeksi kerja, inspeksi geometrik, inspeksi getaran, inspeksi bahan dengan NDT

9. Incoming goods inspection

resiko produsen dan konsumen, distribusi poisson, karaktersitik sistem sampling tunggal, sistem sampling dengan dua titik kontrol

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :
Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perawatan mesin pada industri rekayasa.

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team
was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System. In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class..

VENUE :

Golden Flower Hotel, Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

31 Oct – 03 Nov 2012

INVESTATION PRICE/ PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, 1 minggu membayar sebelum training ) atau
Rp 6.750.000/peserta ( peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

Training Module
Training CD contains training material
For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by Training Provider team / instructor
Certificate
Stationeries: NoteBook and Ballpoint
Jacket or waistcoat
Bag or backpackers
Training Photo
Training room with full AC facilities and multimedia
Qualified and experienced instructor
Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

MANUFACTURING PROCESSES TO USE CASTING

Admin2 — Sun, 05 Feb 2012 08:24:20 +0000

MANUFACTURING PROCESSES TO USE CASTING

Golden Flower Hotel, Bandung | 25-28 Jun 2012 | 08:00 – 16:00 | Rp 7.250.000,-

LATAR BELAKANG :

Proses pengecoran logam yaitu salah satu proses pembuatan produk yang dilakukan dengan cara mencairkan logam dalam tungku peleburan (dapur kupola), kemudian dimasukkan ke dalam cetakan dan dibiarkan sampai membeku.

Produk yang dibuat dengan proses pengecoran logam dengan bentuk yang relatif rumit atau komplek dan prosesnya menggunakan cetakan, sehingga lebih baik untuk produksi dengan jumlah banyak atau produksi massal.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Proses Pengecoran Logam (Casting).

SIAPA SAJA YANG MENGIKUTI TRAINING INI ? :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang proses pengecoran logam pada industri rekayasa.

TUJUAN TRAINING :

Setelah Pelatihan para peserta diharapkan memiliki pemahaman lebih tentang pengetahuan proses pengecoran logam untuk pembuatan produk yang mempunyai bentuk relative rumit.

CAKUPAN MATERI TRAINING :

1. Konsep dasar proses pengecoran logam.
2. Bahan-bahan cor.
3. Rancangan produk cor.

Sifat-sifat logam cair
Ukuran dan bentuk ptoduk cor
Model atau pola
Sistem saluran
Cetakan
Proses pembuatan produk cor

4. Pemeriksaan produk hasil cor.
5. Cacat produk cor.
6. Perbaikan dan penanganan produk hasil cor.
7. Proses pengecoran khusus

Trainer

SUGENG ISDWIYANUDI, Ir. MT. And Team

DURASI TRAINING :

4 (Empat ) hari

INVESTATION PRICE/PERSON :

Rp 7.250.00 Grou0,- Full fare:
Rp 7.000.000,- Early bird, payment 1 week before Training
Rp 6.750.000,- Forp, min 3 person from 1 company

FASILITAS UNTUK PESERTA :

Modul Training
Flash Disk berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Tas
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

Manufacturing Process to Use CNC Machining

Admin2 — Sun, 05 Feb 2012 07:38:31 +0000

Manufacturing Process to Use CNC Machining

Golden Flower Hotel, Bandung | 28-31 May 2012 | 08:00 – 16:00 | Rp 7.250.000,-

LATAR BELAKANG :

Untuk meningkatkan ketelitian, ketepatan, produktivitas, dan kompleksitas pekerjaan yang dapat ditanganinya diperlukan mesin perkakas yang canggih yaitu mesin perkakas CNC. Mesin perkakas CNC memerlukan berbagai perangkat lunak dalam pengoperasiannya yang digunakan dalam membuat program untuk proses pembuatan produk yang berkualitas (pemrograman NC). Mesin perkakas CNC dilengkapi dengan kontrol numerik sebagai fungsi pengaturan gerakan pahat, gerakan pemotongan, dan pengaturan kondisi pemotongan, serta fungsi pengaturan yang lainnya.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Proses Pemesinan CNC (CNC Machining).

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang proses pemesinan CNC pada industri manufaktur.

TUJUAN TRAINING :

Setelah mengikuti pelatihan ini para peserta diharapkan akan lebih :

Memahami tentang pengetahuan dan keahlian dalam proses pembuatan program NC dengan kode G-ISO untuk program urutan proses pengerjaan pembuatan produk pada mesin bubut CNC dan mesin freis CNC.
Memahami tentang pengetahuan dan keahlian dalam proses pembuatan produk dengan program makro (SIEMENS atau FANUC).

CAKUPAN MATERI TRAINING :

1. Mesin CNC

Karakteristik mesin CNC
Sistem kontrol mesin CNC

2. Pemrograman NC

Langkah-langkah pemrograman NC
Bahasa program NC dan kode standar
Pemrograman NC dengan kode G-ISO
Pemrograman NC untuk proses bubut
Pemrograman NC untuk proses freis

3. Sistem pemerkakasan dan sistem koordinat

4. Rotasi dan penyekalaan sumbu koordinat

5. Siklus pemesinan

Main program dan sub program
Proses makro (contoh: SIEMENS/FANUC)

Trainer
SUGENG ISDWIYANUDI, Ir. MT. And Team
was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System. In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

DURASI TRAINING :

4 (empat) hari

INVESTATION PRICE/PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
Rp 6.750.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

Modul Training
Flash Disk berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Tas
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

SWEEPING CARGO & TRANSPORTATION MANAGEMENT

Admin2 — Sun, 05 Feb 2012 07:19:06 +0000

SWEEPING CARGO & TRANSPORTATION MANAGEMENT

Hotel Amaris, Bandung | 21-22 Februari 2012 | Rp 6.000.000,

DESKRIPSI

Transportasi, Cargo dan Bongkar Muat memegang peranan yang sangat penting dalam bisnis internasional. Transportasi, Cargo dan Bongkar Muat akan menjamin kelancaran lalu lintas barang dalam perdagangan internasional dan menjamin hak pemilikan atas barang dengan pengeluaran dokumen pengapalan yang sangat vital seperti bill of lading, airways bill. Transportasi, Cargo dan Bongkar Muat ekspor impor dapat dilakukan melalui darat, Laut dan Udara.

Paraeksekutif di bidang eskpor impor sangat penting sekali untuk memahami dan mempelajari dengan seksama Transportasi, Cargo dan Bongkar Muat agar proses transaksi internasional tersebut berjalan dengan lancar.

Workshop ini memberikan pengetahuan yang lengkap mengenai Transportasi, Cargo dan Bongkar Muat, karena akan dibahas International transportation, Dokumen-dokumen transpotasi yang dibutuhkan, Jenis – jenis usaha yang berhubungan dengan muatan kapal laut dan lain sebagainya.

TUJUAN

Pelatihan ini dimaksudkan agar peserta memahami berbagai kegiatan pengangkutan barang dan bongkar muat yang mencakup International Transportation, Freight (Ongkos Angkut, Transport Document, Bill of Lading (B/L), The Haque – Visby Rules & The Hamburg Rules, Jenis – jenis Usaha yang Berhubungan dengan Muatan Kapal Laut, Cargo (Pengapalan Muatan), Shipment (Pengapalan) dan International Commercial Terms (Incoterms) 2000

OUTLINE

International Transportation

Pengertian Transportasi Internasional
Shipping Company
- Liner dan Conference Liner
- Tramper
- Chater Party

Freight (Ongkos Angkut)

Pengertian & Dasar Perhitungan
Dead Freight, Mates Freight dan Dock Receipt

Transport Document

Pengertian Dokumen – dokumen Transportasi
Jenis – jenis Dokumen – dokumen Transportasi
- Marine Bill of Lading
- Air Waybill atau AWB
- Railway Consigment Note (RCN)
Jenis – jenis Dokumen Transportasi Lainnya (FIATA)
- Combidoc
- Fiata Combined Transport Bill of Lading (FBL)
- Multidoc
- Forwarder Certificate of Receipt
- Waybill

Bill of Lading (B/L)

Fungsi dari Bill of Lading (B/L)
Jenis – jenis B/L
Cara Peralihan B/L
Praktek Pengisian Formulir Bill of Lading (B/L)

The Haque -VisbyRules & TheHamburgRules

Sejarah the Haque Rules
Pokok – pokok dalam the Haque Rules & the Hamburg Rules

Jenis – jenis Usaha yang Berhubungan dengan Muatan Kapal Laut

EMKL (Ekspedisi Muatan Kapal Laut)
Freight Forwarding
Warehousing (Pergudagangan)
- Jenis – jenis Gudang
- Fungsi Gudang
- Operasi Pergudangan
Perusahaan Bongkar Muat (PBM)
- Pengertian Bongkar Muat
- Ruang Lingkup Pelaksanaan Bongkar Muat
Lighterage

Cargo (Pengapalan Muatan)

Pengertian Cargo
Jenis – jenis Cargo
Proses Pengapalan Muatan (Cargo)
Bulk, General dan Homogeneous
Stowage Plan & Factor
Broken Stowage

Shipment (Pengapalan)

Pengertian dari Shipment
Pihak-pihak yang Terlibat dalam Shipment
Tanggung Jawab dan Kewajiban Pihak yang Terlibat

International Commercial Terms (Incoterms) 2000

PESERTA PELATIHAN

Pelatihan ini dapat diikuti oleh karyawan berbagai level jabatan mulai Manajer, Supervisor dan staff dari berbagai bagian/divisi baik logistik (forwarding & warehousing) pengangkutan dan lain-lain, atau yang bidang pekerjaannya terkait langsung maupun tidak langsung dengan kegiatan perniagaan ekspor impor.

Instruktur:

Drs. Surono, MM

Merupakan instruktur yang telah berpengalaman selama lebih dari 15 tahun dengan kompetensi yang dimiliki di bidang tata-niaga ekspor impor, mekanisme L/C, tarif, kepabeanan. Saat ini menjabat sebagai konsultan profesional di beberapa perusahaan yang bergerak di bidang forwading, di antaranya PT Kawasan Berikat Nusantara Jakarta. Surono juga pernah menjabat sebagai tim auditor di Depertemen Perindustrian dan perdagangan wilayah DIY.

Waktu dan tempat:

Hotel Amaris Bandung Jl. Cihampelas No 171 bandung
21-22 Februari 2012
08.00– 16.00 WIB

Investasi:

Biaya pelatihan sebesar Rp 6.000.000, – / peserta (non Residential).
Pengiriman 3 peserta dari instansi yang sama di kenakan biaya 5.500.000,-/peserta.

Fasilitas:

Training Modules
Training Kit
Certificate, Exclusive Souvenir
Dinner
City Tour (Optional)
Coffee Break
Lunch

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

COATING SYSTEM AND PROTECTION CORROSION

Admin2 — Sun, 05 Feb 2012 04:30:10 +0000

COATING SYSTEM AND PROTECTION CORROSION

Golden Flower Hotel, Bandung | 16-19 Apr 2012 | 08:00 – 16:00 | Rp 7.250.000,-
Golden Flower Hotel, Bandung | 09-12 Juli 2012 | 08:00 – 16:00 | Rp 7.250.000,-
Golden Flower Hotel, Bandung | 09-12 November 2012 | 08:00 – 16:00 | Rp 7.250.000,-

PENDAHULUAN :

Korosi secara ekonomi sangat merugikan sehingga korosi dipandang menjadi masalah serius bagi kontruksi. Dibidang korosi persolaan yang muncul adalah bagaimana menganalisis, mencegah dan mengontrol korosi agar secara ekonomi tidak merugikan. Korosi adalah kerusakan material suatu produk atau komponen mesin dan peralatan yang disebabkan oleh reaksi kimia atau elektro kimia dengan lingkungannya. Lingkungan yang basah atau lembab seperti tercelup dengan air, tetesan embun di atas baja atau besi mempermudah terjadinya korosi. Begitu juga terjadinya reaksi kimia yang melibatkan perpindahan elektron (reaksi oksidasi dan reduksi). Oleh karena perlu dilakukan pengurangan yang bersifat pencegahan terhadap timbulnya korosi.

Korosi dapat menyerang logam atau material bukan logam dengan sangat cepat atau lambat. Dalam kondisi demikian hal yang penting adalah bagaimana menghambat, mencegah terjadinya korosi tersebut. Oleh karena itu hal yang terpenting bagi parencana industri adalah bagaimana meminimasi biaya maintenance, efek pencemaran lingkungan yang terjadi, kontaminasi produk, dan pengaruh terhadap keamanan dan kelayakan lingkungan.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Coating System and Protection of Corrosion.

PESERTA TRAINING :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang coating system and protection corrosion pada industri rekayasa.

TUJUAN TRAINING :

Setelah mengikuti pelatihan ini peserta diharapkan memiliki pemahaman lebih tentang pengetahuan dan keahlian melakukan proses coating system and protection of corrosion.

CAKUPAN MATERI TRAINING :

Coal tar, bitumen and asphalt.
Polyethylene coating.
Epoxy coating.
Concrete wight coating.
Process tin coating.
Product specification.

Instruktur

Slamet Sucipto, Drs., MT. and Team
was graduated from ITB Bandung in metallurgical engineering. He is lecturer in mechanical engineering department at politeknik negeri Bandung(before as poltek ITB). He improved his competencies by following some courses beside his formal education. In his campus, he teachs for some subjects e.g.: material engineering or knowledge of material, energy convertion machine, engineering thermodynamics, instrumentation and control, practice of maintenance and repair, pneumatics and hydraulics. Drs. Slamet Sutjipto, MT. has been teaching training class for companies in Indonesia on several topics e.g.: NDT and Quality Assurance, Metallurgy for Metallurgist, Inspection and Corrosion, Failure Analysis Method, Engineering Material, Testing of Material, Design of Mechanic, Coating System and Protection

DURASI TRAINING :

4 (Empat) hari

INVESTATION PRICE/PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
Rp 6.750.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

Modul Training
Flash Disk berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Tas
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

PENGUJIAN MATERIAL BERSIFAT MERUSAK (DESTRUCTIVE TEST)

Admin2 — Sun, 05 Feb 2012 04:09:36 +0000

PENGUJIAN MATERIAL BERSIFAT MERUSAK (DESTRUCTIVE TEST)
Golden Flower Hotel, Bandung | 23-26 Apr 2012 | 08:00 – 16:00 | Rp 7.250.000,-

PENDAHULUAN :

Pengujian sifat mekanik bahan merupakan disiplin ilmu yang fokus utamanya adalah mengetahui kemampuan bahan terhadap gaya dari luar atau beban (the response of metals to forces or load), sehingga dapat diketahui nilai batas kemampuannya dan aman digunakan. Untuk dapat memahami lebih lengkap tentang pengujian sifat mekanik bahan diperlukan pengetahuan seperti: kekuatan bahan (strength of materials), teorema elastisitas dan plastisitas, mesin disain , matematika, fisika, dll.

Pemahaman kekuatan bahan misalnya diasumsikan bahwa kekuatan bahan terfokus pada teori kekuatan, elastisitas dan plastisitas yang pada hakekatnya asumsi tersebut hanya untuk bahan atau material yang homogen saja (tanpa melibatkan pengaruh temperatur misalnya). Hubungan sifat mekanik dan struktur mikro merupakan hal yang sangat penting dipahami, mengingat setiap perubahan struktur mikro akan berakibat pada perubahan sifat mekanik bahan, misalnya pengaruh temperatur tinggi akan menyebabkan sifat logam menjadi lunak dan sebaliknya pada temperatur rendah sifat logam akan menjadi getas.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Pengujian Material Bersifat Merusak (Destuctive Test).

PESERTA :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang pengujian material bersifat merusak pada industri rekayasa.

SASARAN TRAINING :

Setelah mengikuti pelatihan ini peserta diharapkan memiliki pemahaman lebih tentang pengetahuan dan keahlian dalam pengujian karakteristik material bersifat merusak.

CAKUPAN MATERI TRAINING :

Uji tarik (tensile test)
Uji kekerasan makro dan mikro (hardness test)
Uji torsi (torsion test)
Uji lelah (fatique test)
Uji lentur (bending test)
Uji geser (shear test)
Uji impak (impact test)
Metalografi
Uji komposisi kimiawi

Instruktur

SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System. In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

DURASI TRAINING :

5 (lima) hari

INVESTATION PRICE/PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
Rp 6.750.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

Modul Training
Flash Disk berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Tas
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

NON DESTRUCTIVE TEST

Admin2 — Sun, 05 Feb 2012 03:58:06 +0000

NON DESTRUCTIVE TEST
Golden Flower Hotel, Bandung | 02-05 Apr 2012 | 08:00 – 16:00 | Rp 7.250.000,-

PENDAHULUAN :

Non Destructive Test; NDT adalah pengujian material y2012-02-06ang dilakukan tanpa harus merusak bagian konstruksi (produk, material) atau obyek yang diuji untuk mengetahui cacat baik cacat luar maupun cacat dalam.

Pemeriksaan kualitas terhadap cacat produk (material) dilakukan setiap kali apabila diperlukan. Berkenaan dengan penilaian produk catat yang diteliti, penerimaan dan penolakannya dalam penggunaan dan nilai barang dalam rupa, dipakai sebagai patokan penilaian. Bagi produk yang penilaiannya sulit karena ada pada batas antara diterima dan ditolak, maka hal ini harus diyakinkan dengan pengujian benda palsu atau pengujian dalam penggunaannya. Pemeriksaan harus dilakukan sedemikian rupa sehingga dari pemeriksaan diperoleh keyakinan.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Pengujian Material Bersifat Tidak merusak (Non Destuctive Test).

PESERTA TRAINING :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang pengujian material bersifat tidak merusak pada industri rekayasa.

TUJUAN TRAINING :

Setelah mengikuti pelatihan ini peserta diharapkan memiliki pemahaman lebih tentang pengetahuan dan keahlian dalam pengujian karakteristik material bersifat tidak merusak.

CAKUPAN MATERI TRAINING :

Struktur logam dan diagram fasa
Ultrasonic test
Die penetrate test
X-Ray test
Eddy current test
Magnetic particle
Analisis hasil pengujian non destructive test

Instruktur

DURASI TRAINING :

4 (empat) hari

INVESTATION PRICE/PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
Rp 6.750.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

Modul Training
Flash Disk berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Tas
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

HEAVY DUTY EQUIPMENT

Admin2 — Sun, 05 Feb 2012 03:34:55 +0000

HEAVY DUTY EQUIPMENT
Golden Flower Hotel, Bandung | 28 April -31 May 2012 | 08:00 – 16:00 | Rp 7.250.000,-

TUJUAN TRAINING :

Melalui pelatihan ini diharapkan para peserta dapat meningkatkan pengetahuan dan wawasan mengenai alat berat pembersihan medan, alat berat penggali, alat berat pemuat, alat berat pengangkat, dan alat berat transportasi.

SASARAN YANG INGIN DI CAPAI :

Memahami fungsi, jenis, konstruksi, dan perhitungan kapasitas alat berat bulldozer, ripper, backhoe, loader, grader, scraper, dump truck.
Memahami cara pengoperasian, kapasitas attachment, dan kesalamatan kerja.
Memahami karakteristik tanah dan batuan, kinerja traktor, serta perhitungan pemindahan tanah.
Memahami perawatan alat berat tentang engine, sistem pemindah daya, sistem hidrolik, attachment, dan rangka alat berat.

CAKUPAN MATERI TRAINING :

Komposisi dan jenis-jenis alat berat.
Perbandingan crawler dengan wheel tractor dan attachment alat berat.
Pengertian daya engine.
Konstruksi engine dan kelengkapannya.
Sistem pemindah daya dan kelengkapannya.
Spesifikasi berbagai jenis alat berat
Pengoperasian berbagai jenis alat berat dan keselamatan kerja.
Karakteristik tanah dan batuan.
Bank, swell dan load factor tanah dan batuan.
Bentuk pekerjaan land clearing.
Faktor manusia dan alat dalam menentukan harga satuan pekerjaan.
Waktu satuan pekerjaan bulldozer, loader, dan backhoe.
Jumlah armada dump truck.
Aspek LCC dan BEP dalam pemilihan alat berat.
Teknik pembelian barang.
Pompa, katup, silinder dan sistem pengontrol hidrolik alat berat.
Sirkuit hidrolik dan komponen penggerak front dan rear attachment.
Sirkuit hidrolik dan komponen penggerak stabilizer dan swing attachment.
Scheduling maintenance.
Perawatan engine, sistem pemindah daya dan sistem hidrolik.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :

Foreman, mechanics, operator.

Instruktur

DURASI TRAINING :

4 (empat) hari

INVESTATION PRICE/PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
Rp 6.750.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

Modul Training
Flash Disk berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Tas
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

DISAIN ALAT PENEKAN DAN PEMBENTUK

Admin2 — Sun, 05 Feb 2012 02:50:41 +0000

DISAIN ALAT PENEKAN DAN PEMBENTUK (DESIGN OF PRESS AND FORMING TOOL)
Golden Flower Hotel, Bandung | 27 Feb – 01 Mar 2012 | 08:00 – 16:00 | Rp 7.250.000,-

Dalam proses produksi, selalu menimbulkan biaya langsung maupun tidak langsung. Biaya yang timbul tersebut harus diusahakan pada tingkat yang serendah mungkin tanpa mengurangi kualitasnya, sehinga produk yang dihasilkan nantinya akan mempunyai daya saing tinggi dan pemasaran yang baik, sehingga dapat meningkatkan laba perusahaan.

Untuk mengurangi biaya proses produksi, maka bahan baku harus dapat di proses dalam waktu yang relatif singkat dengan pemakain faktor produksi yang rendah, dalam kaitan tersebut diperlukan sarana-sarana produksi yang efisien dalam hal pengoprerasian maupun pembuatannya.

Efisiensi dan efektifitas suatu alat dan produk sangatlah dibutuhkan dengan proses produksi secara tepat, dan dapat digunakan dalam industri besar maupun industri kecil.

Alat penekan dan pembentuk merupakan salah satu dari sarana produksi efisien yang penggunaannya dalam industri-industri telah terbukti memberikan peranan yang besar dalam upaya menekan biaya produksi.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Disain Alat Penekan dan Pembentuk (Press and Forming Tool).

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perancangan alat penekan dan pembentuk (press dan forming tool) pada industri manufaktur.

TUJUAN TRAINING :

Setelah mengikuti training ini, diharapkan peserta mempiliki Pemahaman tentang pengetahuan dan keahlian dalam merancang alat penekan dan pembentuk (press dan forming tool).

CAKUPAN MATERI TRAINING :

1. Press tool

Prosedur perancangan cutting tool,
Prinsip operasi dan bagian-bagian cutting tool
Penentuan gaya dan clearance,
Perencanaan dan pembuatan cutting tool.

2. Forming tool

Prinsip pembentukan,
Tipe alat pembentuk,
Penentuan gaya pembentuk dan clearance,
Bagian-bagian alat pembentuk,
Perencanaan dan pembuatan alat pembentuk.

Instruktur

DURASI TRAINING :

4 (empat) hari

INVESTATION PRICE/PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
Rp 6.750.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

Modul Training
Flash Disk berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Tas
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

DISAIN KONSTRUKSI MESIN DAN PERALATAN INDUSTRI

Admin2 — Sun, 05 Feb 2012 02:45:05 +0000

DISAIN KONSTRUKSI MESIN DAN PERALATAN INDUSTRI (DESIGN OF MACHINE CONSTRUCTION AND INDUSTRIAL EQUIPM
Golden Flower Hotel, Bandung | 13-16 Feb 2012 | 08:00 – 16:00 | Rp 7.250.000,-

PENDAHULUAN :

Mesin dan peralatan digunakan untuk membuat produk atau komponen mesin dan peralatan. Konstruksi mesin dan peralatan terdiri dari elemen-elemen mesin baik elemen transmisi (poros, bantalan, roda gigi, kopling, sabuk dan puli, rantai, dsb.) dan/atau elemen sambungan (solder, paku keeling, las, dsb.) yang dirakit.

Untuk menciptakan mesin dan peralatan (apabila belum ada) dilakukan terlebih dahulu proses perancangan (disain) sesuai dengan kebutuhan teknologi proses untuk membuat produk atau komponen mesin dan peralatan.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Disain konstruksi (design of construction).

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang disain konstruksi pada industri rekayasa.

TUJUAN TRAINING :

Setelah mengikuti training ini diharapkan mempunyai Pemahaman tentang pengetahuan dan keahlian merancang konstruksi mesin dan peralatan industri tepat guna.

CAKUPAN MATERI TRAINING :

This design class provides participants with a first exposure to real world problems.
The design of simple mechanical systems.
The integrate and implement the accumulated knowledge from previous classes such as how to design shaft, power screw, joins (bolted, welded, etc.), springs, bearings, and flexible power transmission elements.
This course discusses more complex machine elements with regard to selection and sizing.
The coverage includes elements such as brakes, clutches, friction disks, gear systems, gear geometry, involutes, spur, helical, bevel, and worm gears.

Instruktur

DURASI TRAINING :

4 (empat) hari

INVESTATION PRICE/PERSON :

Rp 7.250.000/peserta (bayar penuh) atau
Rp 7.000.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
Rp 6.750.000/peserta (untuk peserta bergroup yang terdiri dari 3 orang peserta atau lebih dari 1 perusahaan yang sama)

FASILITAS UNTUK PESERTA :

Modul Training
Flash Disk berisi materi training
Sertifikat
ATK: NoteBook dan Ballpoint
T-Shirt
Tas
Foto Training
Ruang Training dengan fasilitas Full AC dan multimedia
Makan siang dan 2 kali coffeebreak
Instruktur yang Qualified
Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

GEOLOGY, GEOGRAPHICS AND GEOCHEMISTRY FOR GEOTHERMAL EXPLOTATION

Admin2 — Sun, 05 Feb 2012 01:13:45 +0000

GEOLOGY, GEOGRAPHICS AND GEOCHEMISTRY FOR GEOTHERMAL EXPLOTATION

Hotel Santika Yogyakarta | 20-22 Februari 2012 | Rp. 8.500.000 per peserta (Non Residential)
Hotel Santika Yogyakarta | 13-15 Maret 2012 | Rp. 8.500.000 per peserta (Non Residential)
Hotel Santika Yogyakarta | 02-04 April 2012 | Rp. 8.500.000 per peserta (Non Residential)
Hotel Santika Yogyakarta | 16-18 April 2012 | Rp. 8.500.000 per peserta (Non Residential)
Hotel Santika Yogyakarta | 07-09 Mei 2012 | Rp. 8.500.000 per peserta (Non Residential)

DESCRIPTION

This course discusses various methods of geology, geophysics and geochemistry used during exploration of geothermal or hydrothermal system.

Geology overviews various surveys used during geothermal exploration. Furthermore, it gives knowledge about alteration minerals, especially ones which are common in geothermal system.

Geophysical study overviews various surveys used during geothermal exploration. It gives knowledge how to compile geological condition and geophysics anomalies and physical properties of rock to understand subsurface structure or reservoir.

Geochemistry overviews various surveys used during geothermal exploration, type and distribution of geothermal fluids and interpretation of reservoir condition.

OUTLINE

Day-1

Geothermal system and Geothermal Exploration
Geology for geothermal Exploration
Identification of Geothermal Area
Type of Geothermal Fluid
Geothermal surface manifestation

Day-2

Surface/near surface hydrothermal alteration
Subsurface hydrothermal alteration
Case study: geology for geothermal exploration
Overview of geophysics for geothermal exploration
Gravity Method & Magnetic Methods
Advanced data processing of gravity and magnetic data
Exercise of gravity and magnetic method

Day-3

Geo-electrical method
Data acquisition and processing of magneto telluric (MT) data
Transient Electromagnetic (TEM) method
Micro-earthquake (MEQ) method
Geochemistry for geothermal exploration
Geothermal fluid: origin & distribution
Sampling & chemical analysis of geothermal fluid

Day-4

Characteristic of geothermal fluid: pH, salinity & ion balance
Process occurring in geothermal fluid: boiling, mixing & condensation
Estimation of reservoir fluid characteristic
Geothermal gas
Stable isotope in geothermal

Day-5

Scaling & corrosion
Monitoring of well production
Geochemical survey for geothermal exploration
Case study: geochemistry for geothermal exploration
Environmental impact due to geothermal development

METODE PELATIHAN

Presentasi materi
Diskusi dan pembahasan
Studi kasus berbagai perusahaan
Evaluasi pada akhir pelatihan

Participans

Geologists, rig crews, drilling contract and service company personnel, Shaker Attendants, and any other personnel who are included in Geothermal Project.

Instructor

Dr. Ir. KRT. Nursuhascaryo, M.Sc

He is an expert on the field of Petrloleum & Geothermal Enginering. Currently listed as a faculty member at UPN Veteran Yogyakarta and a doctoral candidate at the Graduate School ITB since 2001. He is also active in giving lectures and consulting for various cases and projects in the fields of mining, especially oil company.

Time and Venue

Tanggal :

20-22 Februari 2012

13-15 Maret 2012

02-04 April 2012

16-18 April 2012

07 -09 Mei 2012

Pukul : 08.00 – 16.00 WIB
Tempat : Hotel Santika Yogyakarta

Course Fee

Training Fee: 8.500.000 IDR (non residential)
Special Rate: 8.000.000 / participant (min 3 participants from the same company)

Facilities

·Module / Handout
·softcopy Materi
Sertifikat
Bag or bagpackers
Training Kit
2xCoffe Break & 1 Lunch
Souvenir
Airport pickup service
Training room full AC and Multimedia
Doorprize

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days

Pipeline Design & Constructions

Admin2 — Sun, 05 Feb 2012 00:45:48 +0000

Pipeline Design & Constructions
Hotel IBIS, Yogyakarta | 21-23 Februari 2012 | Rp. 6.500.000 per peserta (Non Residential)

Deskripsi

Sebagai sarana transportasi fluida, pemipaan memegang peranan sangat penting dalam proses produksi, terutama pada perusahaan oil & gas, di industri kimia dan perusahaan sejenis lainnya. Dengan tujuan untuk mengembangkan pengetahuan yang lebih dalam kepada para engineer dan pelaku usaha yang terlibat didalamnya, maka dibutuhkan kegiatan pelatihan tentang perancangan, pengkodean & standardisasi, pemilihan bahan, fabrikasi serta maintenance pipa, untuk kemudian diterapkan di lapangan dengan efektif

Kegiatan ini sangat penting bagi peserta yang terlibat dalam sistem pemipaan dari mulai perancangan, fabrikasi, konstruksi, pemeliharaan, dan inspeksi. Pelatihan ini memberikan tinjauan mendalam terhadap manajemen integritas proses persyaratan untuk sistem perpipaan dengan mengacu pada ASME B31.3 – Process Piping Code. Program pelatihan ini mencakup tahapan-tahapan di dalam kode mulai dari desain hingga operasional dan manajemen. Pelatihan ini dirancang untuk insinyur, atau profesional yang memerlukan pengetahuan tentang sistem perpipaan di industri proses.

Course Outline
1. Introduction

Purpose
Applicability
References
Distribution
Scope
Metrics
Brand Names
Accompanying Guidance
Specification
Manual Organization

2. Design Strategy

Design Analyses
Specifications
Drawings
Basis of Design
Loading Conditions
Piping Layout

3. General Piping Design

Materials of Construction
Design Pressure
Sizing
Stress Analysis
Flange, Gaskets and Bolting
Materials
Pipe Identification
Piping Supports
Testing and Flushing

4. Metallic Piping Systems

General
Corrosion
Design Pressure
Piping Supports for Metallic
Piping Systems
Joining
Thermal Expansion
Ductile Iron
Carbon Steel
Nickel and Nickel Alloys
Aluminum
Copper

5. Plastic Piping Systems

General
Polyvinyl Chloride (PVC)
Polytetrafluoroethylene (PTFE)
Acrylonitrile-Butadiene-Styrene
ABS
Chlorinated Polyvinyl Chloride
CPVC
Polyethylene (PE)
Polypropylene (PP)
Polyvinylidene Fluoride (PVDF)

6. Rubber and Elastomer Piping Systems

General
Design Factors
Sizing
Piping Support and Burial
Fluoroelastomer
Isobutylene Isoprene
Acrylonitrile Butadiene
Polychloroprene
Natural Rubber

7. Thermoset Piping Systems

General
Reinforced Epoxies
Reinforced Polyesters
Reinforced Vinyl Esters
Reinforced Furans

8. Double Containment Piping Systems

General
Piping System Sizing
Double Containment Piping
System Testing
Leak Detection Systems

9. Lined Piping Systems

General
Plastic Lined Piping Systems
Other Lined Piping Systems

10. Valves

General
Valve Types
Valve Sizing and Selection
Valve Schedule

11. Ancillary Equipment

Flexible Couplings
Air and Vacuum Relief
Drains
Sample Ports
Pressure Relief Devices
Backflow Prevention
Static Mixers
Expansion Joints
Piping Insulation
Heat Tracing
Corrosion Protection
Cathodic Protection
Isolation Joints
Protective Coatings

12. Corrosion Protection

Corrosion Protection
Cathodic Protection
Isolation Joints
Protective Coatings

Participans

Training ini bisa diikuti oleh semua staf, supervisor, pimpinan dan karyawan dari berbagai bidang

Instructor

Rini Dharmastiti, Ir, M.Sc. Ph.D
Expert in mechanical and Industrial Engineering

Time and Venue

Tanggal : 21-23 Februari2012 (3 days training)
Pukul : 08.00 – 16.00 WIB
Tempat : Hotel IBIS, Yogyakarta

Course Fee

Rp. 6.500.000 per peserta (Non Residential), minimal pendaftaran untuk 3 peserta.

Facilities

·Module / Handout
·softcopy Materi
Sertifikat
Bag or bagpackers
Training Kit
2xCoffe Break & 1 Lunch
Souvenir
Airport pickup service
Training room full AC and Multimedia
Doorprize

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

INFORMATION OPTIONS
Judul Training(required)
Tanggal Training
Select a message type (required)
PERSONAL DATA
Your Name(required)
Job Title(required)
Company(required)
Company Address
Email(valid email required)
Mobile Phone(required)
Office Phone(required)
Extention No.
Facsimile (Fax)
Website
PRE REGISTRATION DATA (Tidak Mengikat)
Penanggung Jawab Training di Perusahaan
Email
Office Phone+Ext atau No. Handphone
Jumlah Peserta(required)
Nama-nama peserta
Payment Method
MESSAGE FOR TRAINING PROVIDER
Pesan untuk penyelenggara Training
CC this registration / message to me

cforms contact form by delicious:days