By February 12, 2016 0 Comments Read More →

COMPRESSOR: OPERATION, MAINTENANCE, TROUBLESHOOTING AND DIAGNOSTIC OF FAILURE ANALYSIS

COMPRESSOR: OPERATION, MAINTENANCE, TROUBLESHOOTING AND DIAGNOSTIC OF FAILURE ANALYSIS

Bandung | 22 – 25 Februari 2016 | Rp. 7.950.000/peserta
Bandung | 07 – 10 Maret 2016 | Rp. 7.950.000/peserta
Bandung | 25 – 28 April 2016 | Rp. 7.950.000/peserta
Bandung | 23 – 26 Mei 2016 | Rp. 7.950.000/peserta

Jadwal Training 2016 Selanjutnya …


 

PENDAHULUAN:

Pembekalan para trainee dengan pengetahuan atau kecakapan yang terkait dengan suatu mesin, akan menambah pemahaman, melengkapi konsideransi-konsideransi dan meningkatkan kemampuan dalam penanganan masalah-masalah lapangan mesin yang bersangkutan.

 

TUJUAN PELATIHAN:

Pelatihan yang akan diadakan mempunyai tujuan seperti yang tertera pada butir-butir berikut :

  1. Memahami prinsip kerja compressor.
  2. Memahami kelebihan dan kekurangan masing-masing jenis kompresor.
  3. Memahami spesifikasi masing-masing jenis kompresor.
  4. Memahami spesifikasi sistem instalasi.
  5. Memahami parameter operasi.
  6. Mampu mengevaluasi unjuk kerja kompresor.
  7. Mampu menangani kelainan opersai (trouble).
  8. Memahami dan mampu melaksanakan perawatan.
  9. Mampu meramalkan unjuk kerja kompresor termodifikasi.

 

CAKUPAN MATERI  PELATIHAN COMPRESSOR:

1. Kompresor volumetrik (positive displacement compressor) dan kompresor dinamik (turbo).
2. Komponen kompresor volumetrik dan kompresor dinamik.
3. Sifat-sifat gas dan campuran gas serta proses kompresi.
4. Pembangkitan tekanan
5. Operasi kompresor

  • Normal
  • Perubahan kecepatan putar
  • Perubahan beban
  • Surging
  • Chocking

6. Prestasi kompresor :

  • Kerugian-kerugian energi
  • Neraca energi
  • Efisiensi kompresor
  • Kurva-kurva prestasi

7. Prestasi kompresor :

  • Kerugian-kerugian energi
  • Neraca energi
  • Efisiensi kompresor
  • Kurva-kurva prestasi

8. Komponen kritis kompresor dinamik :

  • Sudu (vanes)
  • Sudu pengarah ( intake guide vane)
  • Bantalan ( journal and thrust bearing)
  • Seal oil and buffer gas system

9. Komponen-komponen dan peralatan bantu (auxiliaries)

  • Sistem pelumasan
  • Pendingin pelumas (oil cooler)
  • Penjerat air (demister)
  • Pemisah pelumas (oil separator)

10. Kecepatan putar kritis

11. Instalasi kompresor

12. Operasi kompresor

  • Start-up
  • loading
  • Shut-down

13. Maintenance

14. Trouble-shooting

15. Failure analysis diagnostic

16. Report system

17. Diskusi

INSTRUKTUR :

Ir.Ali Mahmudi, M.Eng. and Team

Ir. Ali Mahmudi, M.Eng. graduated from mechanical and system engineering department RMIT Melbourne Australia for his magister and from Mechanical Engineering Bandung Institute of Technology (ITB) for his bachelor. His core expertise is in fluid and thermal energy convertion machine. Ir. Ali Mahmudi, M.Eng. is lecturer at mechanical engineering Poltek ITB (Polban), and at mechanical engineering PEDC and also at faculty of technique  UNISBA(Universitas islam Bandung). In campus he teach for subjects as follows Termodinamika Teknik, Mekanika Fluida, Perpindahan Kalor & Penukar Kalor, Pompa & Kompresor, Boiler & Turbin, Pneumatik & Hidrolik, Mekatronika, Mesin Konversi Energi Fluida & Termal, Teknik perawatan & Perbaikan Mesin, Instrumentasi, Mekanika & Mesin Fluida, and Penggerak Mula.  Ir. Ali Mahmudi, M.Eng. has frequently taught training for companies in Indonesia for many topics included in his majoring expertise.

TEMPAT TRAINING :  

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

DURASI TRAINING :  

4 hari

 

 

 

TRAINING TIME :  

  1. 22 Feb 2016-25 Feb 2016
  2. 07 Mar 2016-10 Mar 2016
  3. 25 Apr 2016-28 Apr 2016
  4. 23 May 2016-26 May 2016
  5. 20 Jun 2016-23 Jun 2016
  6. 25 Jul 2016-28 Jul 2016
  7. 08 Aug 2016-11 Aug 2016
  8. 26 Sep 2016-29 Sep 2016
  9. 24 Oct 2016-27 Oct 2016
  10. 07 Nov 2016-10 Nov 2016
  11. 13 Dec 2016-16 Dec 2016

 

 

HARGA INVESTASI/PESERTA :

  1. 7.950.000/peserta (bayar penuh) atau
  2. 7.750.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. 7.500.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

 

 

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

Post a Comment