Electric Power System Protection
Electric Power System Protection
Grand Preanger Hotel, Bandung | May 17-20, 2010 | Rp. 7.250.000,-
INTRODUCTION
Construction of generation plants, transmission and distribution of electrical energy systems is a costly business. At both levels of national grid systems and local industrial plants, two important aspects are at the heart of this strategic industry. These are the reliability of energy delivery to meet customers’ demands and safe operation. At different stages of energy processing i.e. at the generation, transmission and energy delivery stage, protection of personnel and equipment is of prime importance. To achieve these goals, protection schemes are to be employed. The philosophy adopted in any protection scheme is to clear faults with a minimum system disruption, at a high speed, and in a simple and economical way. The course deals with different types of protection schemes used in large networks and those adopted in industrial plants. It describes some of the important components such as relays, comparators and other protective gears, and techniques and calculations used for their settings. The course also reflects on recent development and what are new in this important field of electricity industry.
OBJECTIVES & KEY BENEFITS
The following sees the benefits from this course:
On organizational level
- It introduces the subject of protection as an art where technical and economical constraints are to be met and compromised to achieve certain engineering requirements.
- Learn to develop and manage well-protected plants that lead to a higher security, less outages and hence better profitability.
- The course introduces new technologies used in relaying systems such as microprocessor and computer relaying which put organizations at the forefront of modern electricity industries.
- Helps organizations in making appropriate decisions at times of system expansion or in situations where new developments become necessary.
- Help organizations to understand causes of system failures, means available for remedies and hence better system management and operation with minimum investment.
Personal Impact
- Introduces and acquaints attendees with different components used in protection schemes.
- Ability to perform some basic essential calculations required for relay settings.
- Establishes confidence in dealing with protection schemes installed for protecting personnel equipment to grantee flow of energy.
- Learn how to assess protection performance.
- Add knowledge on how to improve security level by designing better protection systems with aim to improve performance.
- Learn about error sources introduced by some protection scheme components and how to overcome them.
SEMINAR OUTLINE
Fundamentals of Protection Practice and Basic Technology
- Protective Gear.
- Reliability
- Selectivity
- Speed, Stability and Sensitivity
- Circuit quantities & conventions
- Fault calculations
CTs Requirements
- Error in CTs and compensation
- Accuracy limit current of CTs
- Class X CTs and linear CTs
- Transients in CTs
- Practical conditions
Static Relays
- Circuits using analogue techniques
- Digital techniques
- Output and Tripping circuits
- Electrical Interference
- Future trends
Protection Schemes and substation design diagrams
- Generator protection
- Motor protection
- Transformer protection
- Line Protection
- Substation Design Diagrams
Differential protection
- Classification of differential protection
- Direction comparison
- Circulating current and balanced voltage systems
- Transformer differential protection
- Differential protection for generators and rotating machines
- Line differential protection
- Busbar-differential protection
- Differential system with multiple restraint
- High impedance differential system
Industrial Power System Protection
- Busbar arrangement
- Discrimination
- HRC fuses
- Industrial circuit-breakers
- Infeed fault current from induction motor
- Automatic changeover systems
- Voltage and phase reversal protection
- Private generation
Installation, testing and maintenance of protection systems
- Installation of protection equipment
- Testing protection schemes.
- Pre-commissioning tests,
- Installation resistance measurements
- Secondary injection tests
- C.Ts tests
- Periodic maintenance
- Setting and testing numerical protection
WHO SHOULD ATTEND
Managers involved with energy management, Electrical engineers and Technical Staff who have to deal with the aspect of electrical and industrial power system protection, control and operation.
Instructor
Ir. Qamaruzzaman, MT and Team
Ir. Qamaruzzaman, MT graduated from Electrical Engineering, Bandung Institute Technology. He studied at Technische Universitaet Braunschweig, Federal Republic of Germany in 1979 to add has knowledge. He has been lectures and researcher at Department of Electrical Eng ITB since 1973. He has experience in PT. Sucofindo as senior Engineer for Perum Pelabuhan II Project, as senior Engineer, Feasibility study at PT. Spektra, etc. He is actives in IEEE Society Power Electronic, Industrial Engineer, ndustrial Application sine 1986.
Schedule
May 17-20, 2010
4 days
Venue
Grand Preanger Hotel, Bandung
Tuition Fee
Rp. 7.250.000,- per participant, excluding accommodation & tax.
cforms contact form by delicious:days
Popularity: 1% [?]
Related training:
- ELECTRICAL GROUND AND LIGHTNING PROTECTION SYSTEM ELECTRICAL GROUND AND LIGHTNING PROTECTION SYSTEM The Jayakarta Suite Hotel & Spa, BANDUNG | October 13-16, 2009 | US$ 770.00/person Objective If you attending this course, you will...
- Electric Generator-Set: Selection Operation, Maintenance and Troubleshooting Electric Generator-Set: Selection Operation, Maintenance and Troubleshooting Papandayan Hotel, Bandung | March 1-5, 2010 | Rp.8.250.000,- COURSE OBJECTIVES After completing this 5-day course, participants will get the following benefits: Enhance...
- Electrical Grounding and Lightning Protection Electrical Grounding and Lightning Protection Jayakarta Hotel, Bandung | February 8-12, 2010 | Rp.8.250.000,- INTRODUCTION Lightning is a natural phenomenon that may occur everywhere in the world. Failure to...
- Electric Machinery: Selection Operation, Maintenance and Troubleshooting Electric Machinery: Selection Operation, Maintenance and Troubleshooting Grand Serela Hotel, Bandung | June 22-26, 2009 | Rp. 8.250.000,- WHAT YOU WILL LEARN Enhance understanding of electric Machinery operation and...
- ELECTRIC SUBMERSIBLE PUMPING ELECTRIC SUBMERSIBLE PUMPING ASTON HOTEL & RESIDENCE, BANDUNG | October 20-23, 2009 | US$ 880,-/participant Summary This course is to summarize the state of the art of Electric Submersible...
- L/C AS PROTECTION INSTRUMENTS AND TRADE FINANCE Under UCP 600 L/C AS PROTECTION INSTRUMENTS AND TRADE FINANCE UNDER UCP 600 Hotel Ibis / Menara Peninsula, Slipi - Jakarta | 16 s/d 17 July 2009 | 3. 750.000,- Tujuan:...
- Electricity and Power Generation, Basic principles of work and operation Electricity and Power Generation, Basic principles of work and operation Holiday Inn Hotel Bandung | April 12-15, 2010 | Rp. 7.250.000,- OBJECTIVES Setelah menyelesaikan pelatihan ini, para peserta akan...
- Job Safety Analysis and Permit to Work System Job Safety Analysis and Permit to Work System Ibis Slipi Hotel, Jakarta | May 10-12, 2010 | Rp.5.250.000,- OVERVIEW Employers are responsible for ensuring the health and safety of...
