By March 29, 2019 0 Comments Read More →

FLOW ASSURANCE IN PIPING SYSTEMS

FLOW ASSURANCE IN PIPING SYSTEMS

Bandung | 23 – 26 April 2019 | Rp 8.750.000/ peserta
Bandung | 07 – 10 Mei 2019 | Rp 8.750.000/ peserta
Bandung | 17 – 20 Juni 2019 | Rp 8.750.000/ peserta
Bandung | 01 – 04 Juli 2019 | Rp 8.750.000/ peserta

Jadwal Training 2019 Selanjutnya …

 

 

FLOW ASSURANCE IN PIPING SYSTEMS TRAINING INTRODUCTION:

Flow assurance refers to ensuring successful and economical flow of hydrocarbon stream from reservoir to the point of sale. Flow assurance involves effectively handling many solid deposits, such as, gas hydrates, asphaltene, wax, scale, and naphthenates. In addition, it covers network modeling and transient multiphase. Flow assurance is most critical task during deep water energy production because of the high pressures and low temperature (~4 degree Celsius) involved. The financial loss from production interruption or asset damage due to flow assurance mishap can be astronomical. What compounds the flow assurance task even further is that these solid deposits can interact with each other and can cause catastrophic blockage formation in pipelines and result in flow assurance failure.

 

FLOW ASSURANCE IN PIPING SYSTEMS TRAINING OBJECTIVES:

  1. Understand flow assurance
  2. Know flow assurance concepts
  3. Understand flow assurance factors
  4. Know flow tube
  5. Know Flowline
  6. Know control systems
  7. Know Code and Guidelines
  8. Understand Integrity management

 

FLOW ASSURANCE IN PIPING SYSTEMS TRAINING OUTLINE :

  1. System Engineering
  2. Hydraulics
  3. Hydraulics Emulsion
  4. Hydraulics Phase Behaviour
  5. Hydrocarbon Flow
  6. Slugging and Liquid Handling
  7. Pressure Surge
  8. Line Sizing
  9. Design Code and Guidelines
  10. VIV and Wave Fatique
  11. Steel Tube
  12. Control Systems
  13. Flowline
  14. Hydrates, Waxes and Asphaltenes
  15. Integrity Managements of Flexibles

 

CLASSROOM/DEMONSTRATION/LABORATORY EXERCISE:

  1. Study Case

 

INSTRUCTOR : 

Ir.Endra Joelianto, Ph.D

Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia.  He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung.  He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia.

 

VENUE :  

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION

4 days

 

JADWAL TRAINING 2019

  • 23 Apr 2019-26 Apr 2019
  • 07 Mei 2019-10 Mei 2019
  • 17 Jun 2019-20 Jun 2019
  • 01 Jul 2019-04 Jul 2019
  • 05 Agust 2019-08 Agust 2019
  • 02 Sep 2019-05 Sep 2019
  • 30 Sep 2019-03 Okt 2019
  • 04 Nop 2019-07 Nop 2019
  • 03 Des 2019-06 Des 2019

 

INVESTATION PRICE/PERSON

  1. Rp 8.750.000/person (full fare) or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS :

  •     Training Module
  •     Flashdisk contain training material
  •     Certificate
  •     NoteBook and Ballpoint
  •     T-Shirt
  •     Backpack
  •     Training Foto
  •     Training room with full ac facilities and multimedia
  •     Lunch and twice coffee break everyday of training flow assurance
  •     Qualified Instructor
  •     Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

 

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment