FLOW MEASUREMENT AND CONTROL ELEMENT
Golden Flower Hotel, Bandung | 28 Nov – 01 Dec 2012 | Rp 7.250.000,-

 

MANFAAT YANG DIPEROLEH:

Membekali peserta tentang pengetahuan tentang dasar-dasar aliran, metoda pengukuran laju aliran, dan elemen kontrol pada pengukuran laju aliran.

Setelah mengikuti pelatihan ini, peserta diharapkan mampu:

• Memahami dan menjelaskan prinsip kerja pengukuran laju aliran, dan menyelesaikan masalah dasar pengukuran laju aliran
• Menyebutkan komponen dan fungsinya
• Membedakan beberapa metoda pengukuran laju aliran
• Memilih pengukuran laju aliran yang tepat
• Menghitung dan merencanakan meter laju aliran
• Memasang meter aliran dengan tepat
• Menyelesaikan masalah yang berkaitan dengan elemen kontrol dan kontrol pada pengukuran laju aliran

CAKUPAN MATERI TRAINING :

 
1.    Dasar aliran

• Sifat-sifat fluida, jenis aliran, Reynold number, aliran laminar dan turbulen

2.    Unit satuan dan istilah
3.    Kekasaran pipa
4.    Metoda atau pemilihan meter aliran

• Diagram pemilihan, kesalahan pada meter, pemilihan alat ukur aliran

5.    Pengukuran aliran

• Differensial pressure, nosel, orifice, venture meter, rotameter, magnetic flow meter

6.    Konstruksi dan instalasi meter aliran

• Orientasi pipa dana arah aliran, kebutuhan panjang pipa, keakuratan

7.    Sinyal, transducer, dan transmitter
8.    Pengkondisian sinyal
9.    Proses kontrol.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ?:

Para mechanical, rotating, construction, dan project engineers, operator, teknisi di bidang instalasi, pengujian dan perawatan mesin.

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

VENUE :

Golden Flower Hotel, Bandung

TRAINING DURATION :

4 days

TRAINING TIME :

28 Nov – 01 Dec 2012

INVESTATION PRICE/ PERSON :

1. Rp 7.250.000/peserta (bayar penuh)  atau
2. Rp 7.000.000/peserta (early bird, 1 minggu  membayar sebelum training )  atau
3. Rp 6.750.000/peserta ( peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Training CD contains training material
3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by Training Provider  team / instructor
4. Certificate
5. Stationeries: NoteBook and Ballpoint
6. Jacket or waistcoat
7. Bag or backpackers
8. Training Photo
9. Training room with full AC facilities and multimedia
10. Qualified and experienced instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days

Popularity: 1% [?]

Related training:

1. Advance Flow Measurement Advance Flow Measurement The Papandayan Hotel, Bandung | February 06-08, 2012 | Rp. 8.900.000,--/ Participant   WHAT WILL YOU LEARN FROM THIS COURSE? 1. BASIC MEASUREMENT Introduction to Measurement System  Element...
2. INDUSTRIAL FLOW MEASUREMENT INDUSTRIAL FLOW MEASUREMENT Hotel Ibis, Yogyakarta | 14-16 February 2012 | IDR  5.500.000 per participant Hotel Ibis, Yogyakarta | 27-29 March 2012 | IDR  5.500.000 per participant Hotel Ibis, Yogyakarta | 23-25...
3. FINITE ELEMENT METHODS FINITE ELEMENT METHODS Golden Flower Hotel, Bandung | 26-29 Maret 2012 |  08:00 – 16:00 | Rp 7.500.000,-   PENDAHULUAN : Solusi yang dapat ditemukan dalam permasalahan elastisitas hanyalah sedikit saja,...
4. MEASUREMENT SYSTEM ANALYSIS MEASUREMENT SYSTEM ANALYSIS Golden Flower Hotel, Bandung | 10-13 Dec 2012 | Rp 7.250.000,-   NDAHULUAN : Tujuan dari teknik instrumentasi adalah untuk mendapatkan hasil proses dengan kualitas setinggi mungkin, biaya...
5. MEASUREMENT TECHNIQUE FOR MAINTENANCE AND OPERATION LATHE MACHINE MEASUREMENT TECHNIQUE FOR MAINTENANCE AND OPERATION LATHE MACHINE Golden Flower Hotel, Bandung | 17-20 Dec 2012 | Rp 7.250.000,-   MANFAAT YANG DIPEROLEH: Membekali peserta tentang pengetahuan tentang konsep dasar...
6. Control valve Sizing process Control Accurate Flow & Level Measurement Control valve Sizing process Control Accurate Flow & Level Measurement Jayakarta Hotel, Bandung | March 1-5, 2010 | Rp.8.250.000,-   DESCRIPTION This course is developed for engineers and technicians who...
7. Production Handling Separation and Measurement Production Handling Separation and Measurement Golden Flower Hotel, Bandung | 05 – 08 November 2012 | 08:00 – 16:00 | Rp 7.250.000,- PENDAHULUAN : Pemindahan bahan merupakan kegiatan dalam proses...
8. INSTRUMENTATION AND CONTROL SYSTEM INSTRUMENTATION AND CONTROL SYSTEM Golden Flower Hotel, Bandung |  09-12 Apr 2012 | Rp 7.250.000,-   PENDAHULUAN : Sistem pengukuran merupakan bagian dari teknik instrumentasi, karena itu ada baiknya untuk memulai...
9. PIPELINE INTERNAL CORROSION CONTROL AND MONITORING PIPELINE INTERNAL CORROSION CONTROL AND MONITORING Hotel Golden flower,  Bandung | 13 – 16 Februari  2012 | Rp 7.250.000 Hotel Golden flower,  Bandung | 11 – 14 Juni 2012 |...
10. PNEUMATIC CONTROL SYSTEM PNEUMATIC CONTROL SYSTEM   Golden Flower Hotel, Bandung | 19-22 Nov 2012 | Rp 7.250.000,- PENDAHULUAN : Pelaksanaan pekerjaan mekanis mempunyai peranan penting dalam bidang otomatisasi industri, seperti: pencekaman, penggesaran, pengaturan...

Updated By Admin2 • February 6, 2012