GAS TURBINE OPERATION & MAINTENANCE

Hotel Golden Flower, Bandung| 27 February – 01 March 2012| Rp 7.250.000/person
Hotel Golden Flower, Bandung| 25 – 28 June 2012 | Rp 7.250.000/person
Hotel Golden Flower, Bandung| 23 – 26 Juli 2012 | Rp 7.250.000/person
Hotel Golden Flower, Bandung| 15 – 18 October 2012 | Rp 7.250.000/person

INTRODUCTION

Gas turbine in oil and gas used for gas plant and power plant facilities, both of plant are critical plant to append activity of production and delivery system of oil and gas. Reliability and deliverability is more important factor to provide effectiveness system after all.

OBJECTIVE :
After the course participant :

1. Have a good knowledge of gas turbine out and technology include thermodynamic concepts, construction, detail component’s and function
2. Will improve their ability to understand cause and effect of failure to guide root cause analysis in problem solving and trouble shooting

Familiar with product of gas turbine which is used in the gas plant

TRAINING MATERIAL OUTLINE

1.    Introduction to Gas turbine
2.    An Overview of Gas Turbines

• History of gas turbine
• Gas turbine in oil and gas industry

3.    Brayton cycle
4.    Gas turbine art and design
5.    Engine  design
6.    Operation principle
7.    Engine case and inlet air
8.    Gas turbine in detail assembly and function of components

• Compressor section    : Inlet guide vane, Rotor compressor,Stator Compressor,Bleed Valve and  control.
• Diffuser and Combustor    : Combustion chamber, Fuel Nozzle,Ignition plug
• Turbine  and exhaust    :  Inlet nozzle, Blade turbine and cooling system

9.    Auxiliary Components and Accessories : Bearings and Seals, Gears
10.    Gas turbine bearing and lubrication system

• Ingition system
• Bearing and seals
• Fuel gas and gas system

11.    Basic combustion in gas turbine

• Heating value in natural gas (LHV and HHV), Wobb number
• Stochiometric combustion
• Emission of combustion
• How gas burned in combustion chamber
• Cooling technology and thermal barrier coating

12.    Compressor in gas turbine

• Energy convertion in compressor

13.    How compressor work (increase pressure and flowing gas)

• Gas flow compressor  phenomena stall and surge,
• How to control  control surge  ( IGV and bleed valve)
• Compressor failure and material

14.    Turbine who it works

• Convert Pressure and temperature to Mechanical energy
• How blade turbine work
• Internal cooling and coating
• Failure in turbine component

15.    Gas turbine operation and control

• Operation gas turbine for gas compressor
• Operation gas turbine for Power Generation
• Fuel control system
• IGV control system
• Lubrication control system

INSTRUCTOR

Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

VENUE

Hotel Golden Flower, Bandung

TRAINING DURATION

4 days

TRAINING TIME

• 27 February – 01 March 2012
• 25 – 28 June 2012
• 23 – 26 Juli 2012
• 15 – 18 October 2012
  

INVESTATION PRICE/ PERSON

1. Rp 7.250.000/person (full fare)  or
2. Rp 7.000.000/person (early bird, payment 1 week before training) or
3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Bag
7. Training Photo
8. Training room with Full AC facilities and multimedia
9. Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

RECOMMENDATION FOR PARTICIPANTS

For practice session: every participant is recommended to bring laptop/notebook for software installation and practice

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days

Popularity: 1% [?]

Related training:

1. GAS TURBINE : PRINCIPLES, INSPECTION, OPERATION, MAINTENANCE AND TROUBLESHOOTING GAS TURBINE : PRINCIPLES, INSPECTION, OPERATION, MAINTENANCE AND TROUBLESHOOTING Hotel Golden Flower Bandung | 27 Februari – 01 Maret 2012| Rp 7.250.000/person Hotel Golden Flower Bandung | 3 – 6...
2. POWER TRANSFORMER Operation and Maintenance POWER TRANSFORMER Operation and Maintenance Hotel Golden Flower, Bandung | 07 – 10 Mei 2012 | Rp 6.950.000/person Hotel Golden Flower, Bandung | 24 – 27 September 2012 | Rp...
3. TRANSMISSION AND DISTRIBUTION : OPERATION AND MAINTENANCE TRANSMISSION AND DISTRIBUTION : OPERATION AND MAINTENANCE Hotel Golden Flower, Bandung| 05 – 09 Maret 2012 | Rp 7.450.000/person Hotel Golden Flower, Bandung| 16 – 20 Juli 2012 | Rp 7.450.000/person Hotel...
4. MECHANICAL ROTATING EQUIPMENTS: Operation, Maintenance, Trouble Shooting and Analysis MECHANICAL ROTATING EQUIPMENTS: Operation, Maintenance, Trouble Shooting and Analysis Hotel Golden Flower Bandung | 09 – 13 April 2012 | Rp 7.750.000/person Hotel Golden Flower Bandung | 17 – 21...
5. TURBIN GAS DAN TURBIN UAP : Operation, Maintenance And Trouble Shooting TURBIN GAS DAN TURBIN UAP : Operation, Maintenance And Trouble Shooting Hotel Golden Flower Bandung | 23 – 27 April 2012 | Rp 7.750.000/person Hotel Golden Flower Bandung | 23 –...
6. PROGRAMMABLE LOGIC CONTROLLER (PLC) : BASIC PRINCIPLES, OPERATION AND PROGRAMMING PROGRAMMABLE LOGIC CONTROLLER (PLC) : BASIC PRINCIPLES, OPERATION AND PROGRAMMING Hotel Golden Flower, Bandung | 24 – 28 Januari 2012 | Rp 7.450.000/peserta Hotel Golden Flower, Bandung | 16 –...
7. ANTI SURGE CONTROL SYSTEM INSTRUMENTATION: OPERATION MAINTENANCE & TROUBLESHOTING – (Pasti Jalan) ANTI SURGE CONTROL SYSTEM INSTRUMENTATION: OPERATION MAINTENANCE & TROUBLESHOTING – (Pasti Jalan)   Hotel Perdana Wisata,  Bandung | 19-21 Desember 2011 | Rp 7.250.000/person TRAINING MATERIAL OUTLINE : 1. Konstruksi...
8. COMPRESSOR AND PRIME MOVER OPERATION & MAINTENANCE COMPRESSOR AND PRIME MOVER OPERATION & MAINTENANCE Hotel Golden Flower Bandung | 16 – 18  January 2012 | Rp 5.750.000/person Hotel Golden Flower Bandung | 14 – 16 May 2012 | Rp 5.750.000/person Hotel...
9. PIPING AND PIPELINE: DESIGN, INSTALLATION, OPERATION, MAINTENANCE AND INTEGRATED MANAGEMENT PIPING AND PIPELINE: DESIGN, INSTALLATION, OPERATION, MAINTENANCE AND INTEGRATED MANAGEMENT The Jayakarta Hotel, Bandung | January 31- February 3, 2011 | IDR 8.750.000,-/ Person     This special practical approach...
10. REFRIGERASI: OPERATION, MAINTENANCE AND TROUBLESHOOTING REFRIGERASI: OPERATION, MAINTENANCE AND TROUBLESHOOTING Hotel Golden Flower Bandung | 19 – 22 Desember 2011 | Rp 7.250.000,- Hotel Golden Flower Bandung | 20 – 23 Februari 2012 | Rp 7.250.000,-...

Updated By Admin2 • December 15, 2011