By October 8, 2018 0 Comments Read More →

GAS TURBINE TECHNOLOGY

GAS TURBINE TECHNOLOGY

Hotel Ibis, Yogyakarta | 15 – 17 Oktober 2018 | Rp 9.500.000,- per peserta
Hotel Ibis, Yogyakarta | 22 – 24 Oktober 2018 | Rp 9.500.000,- per peserta
Hotel Ibis, Yogyakarta | 29 – 31 Oktober 2018 | Rp 9.500.000,- per peserta

Jadwal Training 2018 Selanjutnya …

Hotel Ibis, Yogyakarta | 02 – 04 Januari 2019 | Rp 9.500.000,- per peserta 
Hotel Ibis, Yogyakarta | 07 – 09 Januari 2019 | Rp 9.500.000,- per peserta 

Jadwal Training 2019 Selanjutnya …

 

 

Deskripsi Training Gas Turbine Technology

Turbin gas  mengkonversi energi dari pembakaran bahan bakar memlaui tiga elemen utama kompresor,ruang bakar dan turbin. Sebagai Turbin Gas yang beroperasi dalam siklus termodinamika terus – menerus, turbin gas memiliki daya yang lebih tinggi daripada mesin pembakaran internal. Turbin gas dapat mempercepat udara untuk membuat atau menggerakan generator untuk menghasilkan listri, mengubah pompa mentenagai pesawat terbang, kereta, kapal, generator, dan bahkan tank.

 

Materi Training Gas Turbine Technology

  1. Introduction of Gas Turbine Technology
  2. Types of Gas Turbine and Gas Turbine Applications
    • Heavy Duty Gas Turbines
    • Aero-Derivative Gas Turbines
    • Two-shaft Gas Turbines
    • Simple Cycle/Combined Cycle/ Combined Heat and Power Applications
  3. Major Components of a Gas Turbine
    • Compressor/Combustor/Turbine
  4. Compressor Components
    • Compressor Design/Effects on Performance
    • Compressor Washing Techniques/Philosophies
  5. Combustion Components
    • Combustion Liner Design/Types
    • Combustion Liner Materials/Repair
    • Fuel Nozzle Design/Repair
    • Environmental Control for Combustion Systems
  6. Types Of Environmental Control
  7. Installation/Retrofitting Environmental Control Systems
  8. Hot Gas Path Components
    • Blade Materials/Design
    • Nozzle Materials/Design
    • Blade/Nozzle Inspection Techniques (Dye Penetrate, Eddy Current)
    • Blade/Nozzle Defects (Corrosion, Erosion, Oxidation)
    • Coatings and Coating Application Techniques
    • Evaluating Components for Repair
    • Repair Techniques and Materials
  9. Gas Turbine Systems
  10. Lubrication Systems
    • Lube Oil Types
    • Oil Monitoring and Cleaning
  11. Fuel Systems
    • Fuel Properties and Selection
    • Fuel Measurement
    • Supply Systems
    • Heavy Fuels and Fuel Dosing
    • Fuel Performance Impacts
    • Environmental Considerations
  12. Bearings
    • Types of Bearing
    • Bearing Materials and Repairs
  13. Additional Systems
    • Starting Systems
    • Inlet Air Systems/Filtering
  14. Control Systems
  15. Types of Control System
  16. Evaluating/Collecting Control System Data
  17. Evaluating Control System Retrofits/Upgrades
  18. Pressure, Temperature and Vibration Monitoring
  19. Case dan Studi

 

Metode Training Gas Turbine Technology

Presentasi, Group Discussion ,Studi Kasus.

 

Peserta Training Gas Turbine Technology

Target dar pelatihan ini  Teknisi dan Engineer yang mencakup dalam operasi dan pemeliharaan dari Turbin Gas (Gas Turbine Technology).

 

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

 

Jadwal Training 2019

  • Hotel Ibis Malioboro ,Yogjakarta
  • 2 – 4 Januari 2019
  • 7 – 9 Januari 2019
  • 14 – 16 Januari 2019
  • 21 – 23 Januari 2019
  • 28 – 30 Januari 2019
  • 6 – 8 Februari 2019
  • 11 – 13 Februari 2019
  • 18 – 20 Februari 2019
  • 25 – 27 Februari 2019
  • 4 – 6 Maret 2019
  • 11 – 13 Maret 2019
  • 18 – 20 Maret 2019
  • 25 – 27 Maret 2019
  • 1 – 2 April 2019
  • 8 – 10 April 2019
  • 15 – 17 April 2019
  • 22- 24 April 2019
  • 29 – 30 Mei 2019
  • 6 – 8 Mei 2019
  • 13 – 15 Mei 2019
  • 20 – 22 Mei 2019
  • 27 – 29 Mei 2019
  • 10 – 12 Juni 2019
  • 17 – 19 Juni 2019
  • 24 – 26 Juni 2019
  • 1 – 3 Juli 2019
  • 8 – 10 Juli 2019
  • 15 – 17 Juli 2019
  • 22 -24 Juli 2019
  • 29 – 31 Juli 2019
  • 5 – 7 Agustus 2019
  • 13-15 Agustus 2019
  • 19 – 21 Agustus 2019
  • 26 -28 Agustus 2019
  • 02 – 04 September 2019
  • 09-11 September 2019
  • 16 – 18 September 2019
  • 23 – 25 September 2019
  • 30 September – 02 Oktober 2019
  • 07 – 09 Oktober 2019
  • 14 – 16 Oktober 2019
  • 21 – 23 Oktober 2019
  • 28 – 30 Oktober 2019
  • 04 – 06 November 2019
  • 11 – 13 November 2019
  • 18 – 20 November 2019
  • 25 – 27 November 2019
  • 02 -04 Desember 2019
  • 9 – 11 Desember 2019
  • 16 – 18 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

Investasi dan Fasilitas Training Gas Turbine Technology

  • 9.500.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Instruktur Training Gas Turbine Technology

Ir. Teguh Pudji Purwanto, MT and team

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment