INDUSTRIAL POWER SYSTEM AND DEVICE COORDINATION

INDUSTRIAL POWER SYSTEM AND DEVICE COORDINATION

Bali | 07 – 09 April 2015 | IDR 8.000.000 per participant
Bandung | 07 – 09 April 2015 | IDR 7.000.000 per participant
Yogyakarta | 07 – 09 April 2015 | IDR 6.500.000 per participant
Bali | 13 – 15 April 2015 | IDR 8.000.000 per participant
Bandung | 13 – 15 April 2015 | IDR 7.000.000 per participant
Yogyakarta | 13 – 15 April 2015 | IDR 6.500.000 per participant

Jadwal Training 2015 Selanjutnya …

 

 

DESCRIPTION

Power system protection is a branch of electrical power engineering that deals with the protection of electrical power systems from faults through the isolation of faulted parts from the rest of the electrical network. The objective of a protection scheme is to keep the power system stable by isolating only the components that are under fault, whilst leaving as much of the network as possible still in operation. Thus, protection schemes must apply a very pragmatic and pessimistic approach to clearing system faults. For this reason, the technology and philosophies utilized in protection schemes can often be old and well-established because they must be very reliable. while the protective device coordination is the process of determining the “best fit” timing of current interruption occur when abnormal electrical conditions. The goal is to minimize an outage to the greatest extent possible. Historically, protective device coordination was done on translucent log-log paper. Modern methods normally include detailed computer based analysis and reporting

OBJECTIVES

1. Be able to calculate available short circuit current at varied power system one-line locations to learn how to properly size fuses, cables, breakers and transformers.
2. Understand the learning protective device coordination, load shedding may be accomplished with minimal impact to power system operation.

 

TRAINING OUTLINES

1. Short circuit calculations
2. Power factor improvement
3. Recommended motor / generator / transformer protection
4. Switchgear and system voltage selection
5. Voltage drop / flicker reduction
6. Equipment / system grounding practices
7. Load estimating techniques
8. Plant modernization recommendations
9. Protective device coordination
   1. Fuses and thermal overload devices
   2. Electro-mechanical and solid state relays
   3. Transformers, cables and bus bars
   4. Circuit breakers

 

INSTRUCTOR

Miftahul Huda, ST, M. Eng. and team

 

TIME & VENUE

• 7-9 April 2015
• 13-15 April 2015
• 20-22 April 2015
• 5-7 Mei 2015
• 18-20 Mei 2015
• 25-27 Mei 2015
• 2-4 Juni 2015
• 15-17 Juni 2015
• 22-24 Juni 2015
• 6-8 Juli, 2015
• 13-15 Juli 2015
• 20-22 Juli 2015
• 3-5 Agustus 2015
• 10-12 Agustus 2015
• 19-21 Agustus 2015
• 7-9 September 2015
• 14-16 September 2015
• 21-23 September 2015
• 5-7 Oktober 2015
• 12-14 Oktober 2015
• 19-21 Oktober 2015
• 2-4 November 2015
• 9-11 November 2015
• 23-25 November 2015
• 2-4 Desember 2015
• 7-9 Desember 2015
• 14-16 Desember 2015
• 28-30 Desember 2015
• Hotel Harper Mangkubumi | Yogyakarta

 

TRAINING FEE

• IDR 6.500.000 per participant (Non-Residential)
• Minimal participants : 2 persons (Yogyakarta)
• Yogyakarta : Ibis Styles Dagen, Ibis Malioboro, Horison Ultima-Riss, Harper Mangkubumi, 101 Hotel, Grand Tjokro, Novotel, Grand Aston, Phoenix Hotel | Kuota Min. Peserta: 2 orang
• Bali : Ibis Styles Kuta, Ibis Dewi Sri, Ibis Bali Kuta, Ibis Circle Kuta, Harris Hotel | IDR. 8.000.000 Per Peserta (Non-Residential) | Kuota Min. Peserta: 5 orang
• Bandung : De Batara, Amaris, Golden Flower Hotel | IDR. 7.000.000 Per Peserta (Non-Residential) | Kuota Min. Peserta: 5 orang

 

FACILITIES

• Training Modul
• Stationeries
• Certificate
• Backpack
• Exclusive Polo shirt
• Flashdisk containing materials
• Training photo
• 2x coffee break and lunch
• Transportation Service from airport to hotel / training venue (at least for 2 participants from the same company).

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days