Industrial Power Systems Analysis Engineering

Yogyakarta | 11-14 June 2012 | IDR 7.000,000.00 per participant
Yogyakarta | 08-11 October 2012 | IDR 7.000,000.00 per participant

 

DESCRIPTION

Good design of electric power distribution systems is vital to safety, maintenance, troubleshooting and the efficient operation of a modern industrial plant. The power distribution system includes high voltage utility tie circuit breakers, main transformers, medium voltage switchgear, distribution transformers, motor control centers, electric motors, variable speed drives, etc. This course is designed to address all aspects of industrial power distribution systems, including system planning, equipment selection, specification and application, system grounding, protection and conformity with electrical code requirements, etc. Typical one line and relaying diagrams will be discussed for various applications.

OBJECTIVE

Learn industrial power system design principals, planning and analysis. This course is designed for electrical power engineers to, review, reinforce and refresh their knowledge of power system design, operation and troubleshooting. Advance your knowledge and skills in system planning, equipment selection, specification and application. Learn and understand important aspects of power distribution system design steps. Improve your knowledge of how to operate your industrial power system efficiently, securely and safely.

Upon completion of this course the participant will be able to:

• Identify and correct power system operation problems such as over and under-voltage, low power factor, high fault current and harmonics distortion.
•  Effectively utilize electrical equipment and apparatus.
• Learn how to specify and select adequate electrical equipment for the right application.
• Understand and perform short circuit calculations, system grounding and relay coordination.

WHO SHOULD ATTEND

Electrical power distribution engineers, electrical power system engineers, plant managers and consulting engineers, as well as technical personnel involved in the design, engineering, operation and maintenance of power distribution systems in an industrial plant.

SUMMARY OUTLINE

1.      INTRODUCTION TO INDUSTRIAL POWER SYSTEMS

• Elements of industrial power systems
• Typical industrial power systems

2.      SYSTEM DESIGN CONSIDERATIONS

• Safety
• Reliability
• Flexibility
• Voltage Considerations

3.      SYSTEM PLANNING

• Load Demand and Survey
• Local Generation
• Utility Service and Requirements
• Substation Configuration
• Protection Consideration
• Special Loads

4.      EQUIPMENT SELECTION

• Substation Transformers
• Switchgears and Circuit Breakers
• Fuses and Fuse Disconnects
• Power Distribution Centers
• Motor Control Centers
• Surge Arresters
• Voltage/Current Transformers
• Relays and Protection Schemes

5.      SORT CIRCUIT CALCULATION

• Short Circuit Terminology
• Effects of Short Circuits
• Sources of Fault Currents
• Database and System Modeling
• Short Circuit Results and Comparison with Equipment
• Ratings
• Limiting Short Circuit Currents
• Fuses, Reactors, Impedances

6.      SYSTEM GROUNDING DESIGN

• Types of System Grounding
• Selection of System Grounding
• Impact of system grounding

7.      POWER FLOW ANALYSIS

• Database and System Modeling
• Voltage Regulation and Voltage Control
• Normal and Emergency Operations
• Motor Starting

8.      PROTECTION AND RELAY COORDINATION:

• System Protection Requirements
• Overcurrent Protection
• Ground Fault Protection
• Differential Protection
• Transformer Protection
• Motor Protection, Cable Protection and Bus Protection

METHODE

• Discuss
• Case Study
• Evaluation
• Simulation

INSTRUKTUR

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

TIME & VENUE

• Yogyakarta
• 11-14 June 2012
• 08-11 October 2012
• 4 days – 08 am – 04 pm

COURSE FEE

IDR 7.000,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days

 

Popularity: 1% [?]

Related training:

1. INDUSTRIAL POWER SYSTEMS ENGINEERING & DEVICE COORDINATION INDUSTRIAL POWER SYSTEMS ENGINEERING & DEVICE COORDINATION Yogyakarta | 12-15 Maret 2012 | 08.00 – 16.00 WIB | Rp. 5.500.000,- FOR INDUSTRIAL & COMMERCIAL POWER SYSTEMS This course is designed for...
2. Power Distribution Engineering Power Distribution Engineering Yogyakarta |  30 April-03 May 2012 | IDR 7.000,000.00 per participant Yogyakarta | 01-04 October 2012 | IDR 7.000,000.00 per participant DESCRIPTION The purpose of this course is...
3. Power System Coordination Power System Coordination Yogyakarta | 06-09 February 2012 | IDR 7.000,000.00 per participant Yogyakarta | 21-24 May 2012 | IDR 7.000,000.00 per participant Yogyakarta | 15-18 October 2012 | IDR 7.000,000.00 per participant...
4. Protection on Power Systems Protection on Power Systems Yogyakarta | 26-29 March 2012 | IDR 7.000,000.00 per participant Yogyakarta | 09-12 July 2012 | IDR 7.000,000.00 per participant Yogyakarta | 10-13 December 2012 | IDR 7.000,000.00...
5. PROTECTION On ELECTRICAL POWER SYSTEM PROTECTION On ELECTRICAL POWER SYSTEM Yogyakarta | 2– 5 April 2012 | 08.00 – 16.00 WIB | Rp.  5.500.000,- /Peserta (Non Residensial)   Course Objectives: Power System Analysis means verifying the...
6. Power Systems Transients Power Systems Transients Yogyakarta | 13-16 February 2012 | IDR 7.000,000.00 per participant Yogyakarta | 28-31 May 2012 | IDR 7.000,000.00 per participant Yogyakarta | 22-25 October 2012 | IDR 7.000,000.00 per...
7. Installation and Electric Power System Protection Installation and Electric Power System Protection Yogyakarta | 06-09 February 2012 | IDR 7.000,000.00 per participant Yogyakarta | 18-21 June 2012 | IDR 7.000,000.00 per participant Yogyakarta | 15-18 October 2012 | IDR...
8. ELECTRICAL POWER SYSTEM ANALYSIS ELECTRICAL POWER SYSTEM ANALYSIS Hotel Grage Ramayana, Malioboro Yogyakarta | 7 s.d 10 November 2011 | Rp. 6.500. 000,-/participant (non residential) COURSE OBJECTIVE Power System Analysis means verifying the adequacy of the...
9. Power System Protection and Relay Coordination Power System Protection and Relay Coordination Yogyakarta |  05-08 March 2012 | IDR 7.000,000.00 per participant Yogyakarta | 18-21 June 2012 | IDR 7.000,000.00 per participant Yogyakarta | 19-22 November 2012 |...
10. Underground Electrical Distribution Systems Underground Electrical Distribution Systems  Yogyakarta | 23-26 April 2012 | IDR 7.000,000.00 per participant Yogyakarta | 06-09 August 2012 | IDR 7.000,000.00 per participant COURSE BENEFIT By attending this course you...

Updated By Admin2 • February 8, 2012