By February 26, 2014 0 Comments Read More →

INSTRUMENTATION AND CALIBRATION

INSTRUMENTATION AND CALIBRATION

Yogyakarta | 17 – 20 Maret 2014 | Rp 7.950.000/person
Yogyakarta | 14 – 17 April 2014 | Rp 7.950.000/person
Yogyakarta | 19 – 22 Mei 2014 | Rp 7.950.000/person
Yogyakarta | 16 – 19 Juni 2014 | Rp 7.950.000/person
Yogyakarta | 7 – 10 Juli 2014 | Rp 7.950.000/person

Jadwal Training 2014 Selanjutnya …


 

TUJUAN :

Setelah selesai mengikuti kursus instrumentation and calibration ini, peserta diharapkan akan mengerti dan memahami masalah peralatan instrumentasi secara umum dan konsep aktualnya serta faktor yang menyertai seperti setting up, calibrating dan troubleshooting pada instrumen sensor, transducers and system. Dengan pengenalan teori pengoperasian pada masalah umum, kesalahan konsep dan kerusakan pada sensor dan sistem tersebut.

 

MATERI TRAINING INSTRUMENTATION AND CALIBRATION :

  1. Reason for measurement / overview / history.
  2. Parts of the basic instrumentation & control loop.
  3. Using process & instrument drawings (P&ID’s).
  4. Process control signals and common transducers.
  5. Understanding the 4 to 20 milliamp current loop.
  6. Signal conversions.
  7. Basics of instrument calibrations.
  8. Position and speed sensors.
  9. Temperature sensors and calibration.
  10. Pneumatic and hydraulic pressure concepts.
  11. Pressure, force and strain sensors and calibrations.
  12. Level detectors and calibrations.
  13. Fluid and gas flow concepts.
  14. Flow detectors.
  15. Typical problems in instrumentation system.
  16. Smart instruments.
  17. Instrumentation data communications and network.
  18. Trends in sensors and instrumentation.
  19. Designing and installing instrumentation systems.
  20. Troubleshooting instrumentation systems.


INSTRUCTOR : 

Tugino, ST.,MT. dan Tim

Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon,PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

VENUE

Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION :

4 hari

 

TRAINING TIME :

  1. 20 – 23 Januari 2014
  2. 17 – 20 Februari 2014
  3. 17 – 20 Maret 2014
  4. 14 – 17 April 2014
  5. 19 – 22 Mei 2014
  6. 16 – 19 Juni 2014
  7. 7 – 10 Juli 2014
  8. 19 – 22 Agustus 2014
  9. 15 – 18 September 2014
  10. 14 – 17 Oktober 2014
  11. 17 – 20 November 2014
  12. 15 – 18 Desember 2014

 

INVESTATION PRICE/PERSON :

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training Instrumentation and Calibration dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10.  Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • Google Bookmarks
  • Y!GG
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • MySpace
  • Technorati
  • YahooMyWeb
  • YahooBuzz

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment

Switch to our mobile site