INSTRUMENTATION AND CONTROL SYSTEM

Hotel Golden Flower Bandung | 24 – 26 January 2012| Rp 7.250.000/person
Hotel Golden Flower Bandung | 16 – 19 April 2012| Rp 7.250.000/person
Hotel Golden Flower Bandung | 16 – 19 July 2012| Rp 7.250.000/person
Hotel Golden Flower Bandung | 15 – 18 October 2012| Rp 7.250.000/person

TRAINING OBJECTIVE : 

Pelatihan ini dimaksudkan untuk memberikan pengetahuan dan pemahaman tentang instrumentasi dan sistem pengendalian (control system) dalam suatu industri. Pembahasan mengenai instrumentasi akan dilakukan secara menyeluruh sesuai unit atau elemen dari suatu sistem penngendalian, dari unit pengukuran, transmitter, transducer, hingga unit kendali akhir (final control element atau control valve). Sedangkan pembahasan control system akan dimulai dari konsep control system, elemen-elemen, hingga control system yang digunakan secara industrial seperti DCS (distributed control system). Sistem pengendalian untuk menjamin keselamatan kerja (safety) juga akan dibahas dalam pelatihan ini. Pelatihan akan dilaksanakan baik dengan metode pemaparan, maupun diskusi dan studi kasus, agar sesuai dengan kebutuhan peserta di lapangan. Secara umum, setelah mengikuti pelatihan ini, peserta diharapkan mendapatkan pemahaman menyeluruh mengenai instrumentasi dan sistem pengendalian (control system) yang digunakan dalam industri, khususnya industri minyak dan gas.

TRAINING MATERIAL OUTLINE :

1.    Introduction to Instrumentation and Control System

2.    Instrumentation for Measurement Units

• flow measurement ,
• pressure measurement,
• temperature measurement, etc

3.    Instrumentation for Transmitter & Transducer

4.    Final Control Elements

• valve body,
• Actuator,
• valve positioned,
• valve sizing, etc

5.    Piping & Instrument Diagram

• ISA symbol & legend,
• standards in drawing P&ID, etc

6.    Concept of Control System

• terminologies,
• industrial process control etc

7.    Process Dynamic

• first order,
• second order, etc

8.    Control System Strategies

• single loops feed back control,
• multiple loops cascade control, feed forward control, etc

9.    Industrial Control System Modes

• on-off mode,
• PID mode, etc

10.    Basic Tuning Procedures

11.    Control System for Safety

• alarm system,
• shut-down system, etc

12.    Industrial Control System

• PLC,
• DCS, etc

13.    Case Study and Discussion.

INSTRUCTOR :

Ir. In Jumanda Kasdadi, MT. and Team

Ir. In Jumanda Kasdadi, MT is graduated from Chemical Engineering Bandung Institute of Technology (ITB)and now he is lecturer at chemical engineering poltek ITB (Polban).  Ir. In Jumanda Kasdadi, MT has experienced to be instructors at industrial training more than 15 years, both either  inhouse training or public training. Trainings that delivered by him for many companies  such as for oil and gas, for mining, for manufacture and etc. held in some cities in Indonesia like Jakarta, Bandung, Batam and others.

Beside training, Ir.Injumanda Kasdadi,MT also have experiences at some professional engineering working such as:

• Risk Assessment at oil & gas
• project of Processing at process design
• Facility for waste handling
• Piping and feasibility study of pipeline in onshore and offshore
• And others

This much valuable experiences will be shared to participants in training class.

VENUE

Hotel Golden Flower,  Bandung

TRAINING DURATION

4 days

TRAINING TIME :

• 24 – 26 January 2012
• 16 – 19 April 2012
• 16 – 19 July 2012
  
• 15 – 18 October 2012
  

INVESTATION PRICE/ PERSON :

1. Rp 7.250.000/person (full fare)  or
2. Rp 7.000.000/person (early bird, payment 1 week before training) or
3. Rp 6.750.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with full AC facilities and multimedia
9. Lunch and twice coffeebreak everyday of training
10. Qualified instructor
11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days

Popularity: 1% [?]

Related training:

1. PROCESS CONTROL & INSTRUMENTATION PROCESS CONTROL & INSTRUMENTATION Golden Flower Hotel, Bandung | November 28-December 01, 2011| Rp. 8.250.000/person   OBJECTIVE: To understand the scope and utilization of instrumentation and process control technology applicable...
2. PROCESS CONTROL & INSTRUMENTATION PROCESS CONTROL & INSTRUMENTATION Hotel Amaris Cihampelas, Bandung | Senin-Kamis ( 19-22) Maret 2012 | Rp 5.000.000,   DESCRIPTION This course is designed to give participants a solid, practical understanding of common...
3. INSTRUMENT AND PROCESS CONTROL SYSTEM INSTRUMENT AND PROCESS CONTROL SYSTEM  – Yogyakarta Hotel Ibis Yogyakarta | 12 – 14 December 2011 | IDR  7.000.000 per participant – non residential     DESCRIPTION This course covers...
4. Instrumentation, Electronics and Control Systems Instrumentation, Electronics and Control Systems Jayakarta Hotel, Bandung | October 26-30, 2009 | Rp.8.250.000,- DESCRIPTION Covers the principles of industrial instrumentation, sensor, signal transmission, interfacing, actuator, process control, the operation...
5. INSTRUMENTATION AND CALIBRATION INSTRUMENTATION AND CALIBRATION Grand Serela Hotel, Bandung | 22th – 24th November 2011 | Rp 5.500.000, DESCRIPTION : This training course familiarizes participant with common industrial instrumentation systems and teaches...
6. DISTRIBUTED CONTROL SYSTEM DISTRIBUTED CONTROL SYSTEM Bandung | 31 Oktober s.d 03 November 2011 | 08:00-16:00 WIB | Rp 6.250,000,-/peserta (Non resindential)   Description Pelatihan ini membahas mengenai pendesainan, pemonitoran dan pengevaluasian partisipasi di...
7. DISTRIBUTED CONTROL SYSTEM ( DCS ) CENTRUM : OPERATION AND MAINTAINANCE DISTRIBUTED CONTROL SYSTEM (DCS) CENTRUM : OPERATION AND MAINTAINANCE Bandung | 31 Oktober s.d 03 November 2011 ( Batch II ) | 08:00-16:00 WIB | Rp. 6.250,000,-/peserta (Non resindential)  ...
8. Process Control and System Engineering – YOGYAKARTA Process Control and System Engineering - YOGYAKARTA Yogyakarta | 23 – 25 Agustus 2011 | IDR 4.500.000,-   DESKRIPSI Operasi suatu pabrik diharapkan dapat berjalan dengan baik sesuai dengan kondisi...
9. ADVANCED ELECTRICAL & INSTRUMENTATION ADVANCED ELECTRICAL & INSTRUMENTATION Wisma MM UGM, Yogyakarta | 21 – 24 November 2011 | Rp 7.500.000,-/ peserta Wisma MM UGM, Yogyakarta | 16 – 19 Januari 2012 | Rp 7.500.000,-/ peserta DESCRIPTION...
10. ADVANCED ELECTRICAL & INSTRUMENTATION – (Pasti Jalan) ADVANCED ELECTRICAL & INSTRUMENTATION Wisma MM UGM, Yogyakarta | July 11th – 15th 2011 | IDR 6.750.000,- / participant   Deskripsi Electrical power systems within the oil, gas, petrochemical and...

Updated By Admin2 • November 21, 2011