MEASUREMENT SYSTEM ANALYSIS

MEASUREMENT SYSTEM ANALYSIS

Bandung | 09 – 12 Februari 2015 | Rp 7.950.000/person
Bandung | 16 – 19 Maret 2015 | Rp 7.950.000/person
Bandung | 14 – 17 April 2015 | Rp 7.950.000/person
Bandung | 18 – 21 Mei 2015 | Rp 7.950.000/person

Jadwal Training 2015 Selanjutnya …

 

 

PENNDAHULUAN :

Tujuan dari teknik instrumentasi adalah untuk mendapatkan hasil proses dengan kualitas setinggi mungkin, biaya serendah mungkin, dan waktu yang sesingkat mungkin (hasil proses secara optimum atau yang paling baik) atau untuk mendapatkan informasi mengenai sifat-sifat fisik dan kimia dari benda atau proses yang sedang diteliti, atau untuk mengendalikan benda atau proses sehingga sesuai dengan informasi tertentu.

Permasalahan yang ada dalam teknik instrumentasi adalah menentukan pengaruh sistem pengukuran dan sistem pengendalian dalam bentuk hubungan fungsional antara besaran-besaran fisik, yang biasanya antara besaran masukan dan keluaran. Karena teknik instrumentasi meliputi pelaksanaan atau pengawasan dari perencanaan, pemasangan, pemeliharaan, dan penggunaan sistem instrumentasi termasuk semua jenis pengukuran (measurement) dan pengendalian (control).

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Analisis Sistem Pengukuran (Measurement System Analysis).

TUJUAN TRAINING 

Pelatihan ini bertujuan untuk meningkatkan keahlian tentang pengetahuan sistem pengukuran.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ? :

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang sistem pengukuran (teknik instrumentasi) pada industri manufaktur.

CAKUPAN MATERI TRAINING :

1.    Klasifikasi dan elemen instrumen pengukuran

  • pendahuluan, klasifikasi instrumen pengukuran, dan elemen-elemen instrumen pengukuran.

2.    Metoda pengukuran

  • metoda pengukuran langsung (metoda deviasi dan metoda nol), dan metoda pengukuran tidak langsung (metoda analogi dan metoda simulasi).

3.    Pemilihan dan kalibrasi alat ukur

  • sifat umum alat ukur, faktor-faktor pemilihan alat ukur, kalibrasi alat ukur

4.    Kesalahan dan analisis data pengukuran

  • kesalahan sewaktu proses pengukuran, analisis data pengukuran dengan metoda statistika

5.    Karakteristik instrumen

  • karakteristik statik instrumen, karakteristik dinamik,  dan model matematik sistem pengukuran.

TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team
was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class..

VENUE :

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION :

4 days

 

JADWAL 2015

2. 09 Feb 2015-12 Feb 2015
3. 16 Mar 2015-19 Mar 2015
4. 14 Apr 2015-17 Apr 2015
5. 18 May 2015-21 May 2015
6. 08 Jun 2015-11 Jun 2015
7. 27 Jul 2015-30 Jul 2015
8. 10 Aug 2015-13 Aug 2015
9. 14 Sep 2015-17 Sep 2015
10. 26 Oct 2015-29 Oct 2015
11. 16 Nov 2015-19 Nov 2015
12. 30 Nov 2015-03 Dec 2015

INVESTATION PRICE/PERSON :

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days