Motors and Generator Maintenance Testing

Yogyakarta |  09-12 April 2012  | IDR 7.000,000.00 per participant
Yogyakarta | 10-13 September 2012 | IDR 7.000,000.00 per participant

 

 

OBJECTIVE

•  Operating principles, construction and application of AC and DC motors and generators
• Perform insulation resistance, high potential and surge comparison testing in lab
• Perform brush, commutator and maintenance procedures as well as troubleshooting in Lab

WHO SHOULD ATTEND

Designed for electricians, technicians and maintenance personnel that are responsible for the maintenance and testing of motors and generators.

SUMMARY OUTLINE

I. Basic Theory and Fundamentals

• Magnetism

1. Fundamental Properties
2. Force between Magnetic Poles
3.  Magnetic Fields and Flux

•  Electricity

            1. Electron Theory
2. Voltage, Current, and Resistance
3. Power

• Electro-Magnetism

            1. Electric Current and Magnetism
2. Coils (Inductors)

• Amperes Law
•  Electromagnetic Induction

II. AC Generator Theory and Construction

• Principles of Operation
•  Generator Field and Armature
•  Construction of Small Generators
• Construction of Large Generators
• Generator Controls

III. AC Motor Theory

•  The Rotating Magnetic Field
• Types of AC Motors

1.  Synchronous Motors
2.  Induction Motors

IV. AC Motor Construction and Application

• General Construction
•  Stator Electrical Connections
• Selecting the Right Motor

V. AC Generator Testing

• Insulation Testing
• Core Loss Testing
• Surge Comparison Testing
• Bearing Insulation

VI. AC Motor Maintenance and Troubleshooting

•  Visual and Mechanical Maintenance
• Electrical Tests on AC Induction Motors
• Electrical Tests on AC Synchronous Motors
•  Troubleshooting AC Motors
• Motor Troubleshooting Tests

VII. DC Motor Theory and Construction

• Operion of Rotation
• ating Theory
• Construction
• Self-Excited DC Motors
•  DC Motor Speed Control
• Direct

VIII. DC Generator Theory and Construction

• Operating Theory
•  Construction
• Separately Excited and Permanent Magnetic DC Generators
• Self-Excited DC Generators

IX. DC Machine Maintenance

•  Visual Mechanical Inspections
•  Brushes and Commutator Maintenance
• . Electrical Tests
• . Troubleshooting DC Machines :

1.  DC Generators
2.  DC Motors
3.  In-Service and Troubleshooting Tests

X. NFPA 70B Requirements

•  Rotating Equipment
• Testing and Test Methods

 

METHODE

• Discuss
• Case Study
• Evaluation
• Simulation

INSTRUKTUR

Teguh Santoso, Ir
Teguh Santoso experienced more than 26 years in Electrical.

TIME & VENUE

• Yogyakarta
• 09-12 April 2012
• 10-13 September 2012
• 4 days – 08 am – 04 pm

COURSE FEE

IDR 7.000,000.00 per participant non residential

FACILITY

• Module / Handout
• ,Certificate
• ,Souvenir
• ,Training Kit

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me

 

cforms contact form by delicious:days

 

Popularity: 1% [?]

Related training:

1. OPERATION AND MAINTENANCE OF STEAM GENERATOR AND TURBINE OPERATION AND MAINTENANCE OF STEAM GENERATOR AND TURBINE Golden Flower Hotel, Bandung | 26-29 Mar 2012 | Rp 7.250.000,- PENDAHULUAN : Turbin uap merupakan salah satu jenis penggerak mula yang banyak...
2. Motors and Motor Controls Motors and Motor Controls Yogyakarta |  16-19 April 2012 | IDR 7.000,000.00 per participant Yogyakarta | 17-20 September 2012 | IDR 7.000,000.00 per participant     DESCRIPTION Training Motors and Motor Controls...
3. GENERATOR : OPERATION, MAINTENANCE AND TROUBLE SHOOTING GENERATOR : OPERATION, MAINTENANCE AND TROUBLE SHOOTING Yogyakarta | 09 – 12 Juli 2012 | 08.00 – 16.00 WIB | Rp. 6.500.000,- DESKRIPSI Generator adalah peralatan utama pada unit pembangkit...
4. TROUBLESHOOTING, MAINTENANCE & PROTECTION OF AC ELECTRICAL MOTORS & DRIVES TROUBLESHOOTING, MAINTENANCE & PROTECTION OF  AC ELECTRICAL MOTORS & DRIVES Hotel Ambarukmo, Yogyakarta | 20 s.d 22 Maret 2012 | Rp. 7.000.000,-/participant (non residential) Hotel Ambarukmo, Yogyakarta | 22 s.d 24 Mei 2012...
5. TESTING OF MACHINE TOOLS TESTING OF MACHINE TOOLS Golden Flower Hotel, Bandung | 10-13 Sep 2012  | 08:00 – 16:00 | Rp 7.250.000,-   PENDAHULUAN : Mesin perkakas merupakan induk dari mesin-mesin yang lain yang...
6. Motors, Drives and Automation Systems : Installation, Application and Maintenance Motors, Drives and Automation Systems : Installation, Application and Maintenance Zurich Hotel , Balikpapan | 15th – 17th November  2011 | Rp. 6.500.000,-/participant (non residential) Description This technical course will discuss application and installation...
7. PIPELINE : Design, Testing, Inspection And Maintenance PIPELINE :  Design, Testing, Inspection And Maintenance Hotel Golden Flower Bandung | 02 – 06 April 2012 | Rp 7.750.000/person Hotel Golden Flower Bandung | 10 – 13 September 2012 |...
8. MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE MACHINERY CONDITION MONITORING FOR PREDICTIVE AND PREVENTIVE MAINTENANCE Golden Flower Hotel, Bandung  | February 20-23, 2012 | Rp, 8.900.000,-/participant   Background Industrial machinery or power plant is a major supporter of the industry and has a very high critical rate. This means that if there...
9. Info Seminar dan Training 2008 ( Update 12 Juni 2008 ) Pada update ini terdapat 120 training / seminar yang masih dapat didaftar sampai bulan Agustus 2008. Dengan penambahan 2 Training Event Organizer baru yang bergabung. Dalam beberapa hari mungkin akan...
10. Maintenance Planning and Scheduling Maintenance Planning and Scheduling Jogjakarta | June 6-8, 2012 | IDR 7.250.000 ,-/ Person Course Introduction The advancement in technology has tremendously increased the efficiency, product quality and production capacity of...

Updated By Admin2 • February 7, 2012