SCADA SYSTEM : APPLICATION AND PRACTICAL DESIGN
SCADA SYSTEM : APPLICATION AND PRACTICAL DESIGN
Hotel Golden Flower, Bandung | 09 – 12 Januari 2012 | Rp.7.250.000,-per participant
Hotel Golden Flower, Bandung | 05 – 08 Maret 2012 | Rp.7.250.000,-per participant
Hotel Golden Flower, Bandung | 07 – 10 Mei 2012 | Rp.7.250.000,-per participant
Hotel Golden Flower, Bandung | 09 – 10 Juli 2012 | Rp.7.250.000,-per participant
Hotel Golden Flower, Bandung | 03 – 06 September 2012 | Rp.7.250.000,-per participant
Hotel Golden Flower, Bandung | 05 – 08 November 2012 | Rp.7.250.000,-per participant
INTRODUCTION SCADA SYSTEM TRAINING:
This Supervisory Control and Data Acquisition (SCADA) System Training program is designed to give good understanding and knowledge on SCADA System architecture and practical design, including skill enhancement of installing-programming of Master Terminal Unit (MTU, remote terminal Unit (RTU), MTU/RTU communication, MTU/RTU Port List as well as understanding of MTU/RTU software features, MTU/RTU program down load and up load, Reading and Writing module Data of MTU/RTU, SCADA system communication protocol, MTU/RTU redundancy, MTU/RTU programming for logic and PID Regulatory control. Polling and acceptation report, Input/output server and Human Machine Interface (HMI). The focus is this course is bring the participants learning about SCADA system philosophy by hands of practice directly on the integration of MTU and RTU with SCADA system software to collect geographically distributed facility data and to optimize the management of asset
TRAINING OBJECTIVE :
After completing this course, the participant should be able to understand the concept of SCADA system architecture and application design, build and configure the MTU and RTU modules as well, program the MTU and RTU, use sequential and PID controller implementation of MTU/RTU, Input/Output communication to get RTU data, set -up polling and exception report of MTU/RTU, link the MTU/RTU with supervisory computer and use Human Machine Interface (HMI) to optimize the operation of SCADA
TRAINING MATERIAL OUTLINE SCADA SYSTEM:
1. SCADA System Overview
- Typical SCADA System Applications
- Master Terminal Unit (MTU)
- Remote Terminal Unit (RTU) Hardware
- MTU/ RTU System Software and Configuration Set
2. Communication Protocol and Programming
- Ladder Logic Programming
- Logic and Sequential Programming
- Polling and Data Logging
3. PID Controller Programming
- Exception Reporting
- System Redundancy
- Input /Output Server (Driver)
4. Human Machine Interface (HMI)
- Real Time /Historical Trending
- Dynamic Data Exchange (DDE) & OPC Technology
- Historical Database System
5. Multi Protocol/ Multi Brand Instrument System Integration.
- Use Of GSM/ GPRS in SCADA System
- Link to Office Applications
- Discussion and Closing
WHO SHOULD ATTEND THIS TRAINING ? :
- Engineers (Production, Instrumentation, Process, Electrical, Maintenance, Design/ Construction, Facilities, Maintenance, Telecommunication and Information Systems/ IT)
- Supervisors and Superintendents who support the field SCADA systems
- Team Leaders who support the SCADA systems
- Managers who responsible for SCADA systems.
- Everybody who wish to broaden their knowledge on this course subject
TRAINING METHOD AND TOOLS :
- Presentation
- SCADA System Simulation
- King fisher tools for master terminal Unit and remote Terminal units
VENUE : Hotel Golden Flower, Bandung
INSTRUCTOR : Dr.Ir. Edi Leksono, M.Eng. and team
TRAINING DURATION : 4 days
TRAINING TIME :
- 09 – 12 Januari 2012
- 05 – 08 Maret 2012
- 07 – 10 Mei 2012
- 09 – 10 Juli 2012
- 03 – 06 September 2012
- 05 – 08 November 2012
INVESTATION PRICE/PERSON :
- Rp 7.250.000,/person (full fare) or
- Rp 7.000.000/person (early bird, payment 1 week before training) or
- Rp 6.750.000/person (if there is 3 or more participants from the same company)
FACILITIES FOR PARTICIPANTS:
- Training Module
- Flaskdisk contains training material
- For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook
- Certificate
- Stationeries: NoteBook and Ballpoint
- T-Shirt
- Backpack
- Training Photo
- Training room with full AC facilities and multimedia
- Once lunch and twice coffeebreak every day of training
- Qualified and experienced instructor
- Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)
RECOMMENDATION FOR PARTICIPANTS SCADA SYSTEM:
For practice session: each participant is recommended to bring notebook/laptop for softwares installation and practice session
cforms contact form by delicious:days
Popularity: 1% [?]
Related training:
- SCADA SYSTEM : APPLICATION AND PRACTICAL DESIGN SCADA SYSTEM : APPLICATION AND PRACTICAL DESIGN – Yogyakarta Mutiara Hotel Yogyakarta | 25 – 27 October 2011 | IDR 7.500.000 per peserta – non residential Mutiara Hotel Yogyakarta |...
- SCADA System: Application and Practical Design (PASTI JALAN) SCADA System: Application and Practical Design Jayakarta Hotel, Bandung | Sep 27-30, 2010 | Rp.7.250.000,-per participant DESCRIPTION This Supervisory Control and Data Acquisition (SCADA) System Training program is designed...
- SCADA SYSTEM: APPLICATION AND PRACTICAL DESIGN SCADA SYSTEM: APPLICATION AND PRACTICAL DESIGN Hotel Golden Flower Bandung | 4 – 7 April 2011 | Rp 7.250.000/person DESCRIPTION : This Supervisory Control and Data Acquisition (SCADA) System Training...
- SUPERVISORY CONTROL & DATA ACQUISITION SYSTEM (SCADA) SUPERVISORY CONTROL & DATA ACQUISITION SYSTEM (SCADA) Hotel Amaroossa, Bandung | 21 s.d 24 Februari 2012 | 08.00 – 16.00 | Rp 5.500.000,- Hotel Amaroossa, Bandung | 10 s.d 13...
- SCADA (Supervisory Control and Data Acquisition): Principles, Design, Operation and Applications SCADA (Supervisory Control and Data Acquisition): Principles, Design, Operation and Applications Hotel Golden Flower Bandung | 24 – 27 Januari 2011| Rp 7.250.000/person INTRODUCTION SCADA is an acronym for Supervisory...
- GPS (Global Positioning System) for mining and Petroleum : Principles, equipment, data collecting, data processing, and Application GPS (Global Positioning System) for mining and Petroleum: Principles, equipment, data collecting, data processing, and Application Hotel Golden Flower Bandung | 09 – 12 Januari 2012 | Rp 7.250.000/peserta Hotel...
- Competencies Management : Effectife Competency & Design Application Competencies Management: Effectife Competency & Design Application Hotel Amaris Cihampelas, Bandung | Rabu-Jum’at (22-24) Juni 2011 | Rp 8.000.000, Deskripsi: Kompetensi manajemen sudah merupakan salah satu core aktivitas yang ‘mutlak’...
- Pipeline System: Mechanical Design & Specification (PASTI JALAN) Pipeline System: Mechanical Design & Specification Wisma MM UGM, Jl. Colombo No.1 Yogyakarta | July 25th – 29th 2011 | IDR 6.500.000 / participant 1. Objectives After completion of training,...
- Motors, Drives and Automation Systems : Installation, Application and Maintenance Motors, Drives and Automation Systems : Installation, Application and Maintenance Zurich Hotel , Balikpapan | 15th – 17th November 2011 | Rp. 6.500.000,-/participant (non residential) Description This technical course will discuss application and installation...
- BASIC VSAT SYSTEM BASIC VSAT SYSTEM Hotel Golden Flower Bandung | 24 –26 Januari 2012 | Rp 5.250.000/peserta Hotel Golden Flower Bandung | 16 – 18 April 2012 | Rp 5.250.000/peserta...
