SUPERVISORY CONTROL AND DATA ACQUISITION SYSTEM (SCADA)

Hotel Ibis, Yogyakarta |  11 – 14 April 2012 | Rp 7.250.000
Hotel Ibis, Yogyakarta | 16 – 19 Juli 2012 | Rp 7.250.000
Hotel Ibis, Yogyakarta | 05 – 08 November 2012 | Rp 7.250.000

TUJUAN :

Setelah selesai mengikuti kursus ini, peserta diharapkan akan mengerti dan memahami pengoperasian dan pengendalian SCADA system dalam penerapan aplikasinya di industri migas ataupun di industri lainnya. Peserta akan memahami dari prinsip-prinsip, prinsip kerja, komunikasi, hardware-hardware yang digunakan sampai kepada aplikasinya dalam banyak bidang seperti electrical power distribution dan migas serta industry lainnya.

CAKUPAN MATERI TRAINING:

1. Definition of terms.
2. Introduction to SCADA and how it works.
3. Communication requirement.
4. Remote terminal unit (RTU).
5. Field Devices and wiring methods.
6. Data communication/networking.
7. Master terminal unit and configuration.
8. Applications in electric power distribution.
9. Application in oil & gas production & distribution
10. Application in other industries.
11. Troubleshooting.

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:

1. SLTA/D3 dengan pengalaman kerja minimal 3 tahun dengan bidang disain, control dan automation technology dari industri seperti misalnya pembangkit listrik, petrokimia dan pupuk, semen, perminyakan, manufaktur dan sebagainya sebagai tenaga operator.
2. Semua pihak yang ingin memahami topik ini

INSTRUCTOR : 

Tugino, ST.,MT. dan Tim

Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon, PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

VENUE

Hotel Ibis, Yogyakarta

TRAINING DURATION : 

4 hari

INVESTATION PRICE/PERSON :

1. Rp 7.250.000/person (full fare)  atau
2. Rp 6.950.000/person (early bird, yang membayar 1 minggu sebelum training) atau
3.  Rp 6.750.000/person (peserta bergroup 3 orang atau lebih dari 1 perusahaan yang sama)

FACILITIES FOR PARTICIPANTS :

1. Modul Training
2. Flashdisk Training berisi materi training
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Ransel
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10.  Instruktur yang Qualified
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

cforms contact form by delicious:days

Popularity: 1% [?]

Related training:

1. SUPERVISORY CONTROL & DATA ACQUISITION SYSTEM (SCADA) SUPERVISORY CONTROL & DATA ACQUISITION  SYSTEM (SCADA) Hotel Amaroossa,  Bandung | 21 s.d 24 Februari 2012 | 08.00 – 16.00 | Rp 5.500.000,- Hotel Amaroossa,  Bandung | 10 s.d 13...
2. SCADA (Supervisory Control and Data Acquisition): Principles, Design, Operation and Applications SCADA (Supervisory Control and Data Acquisition): Principles, Design, Operation and Applications Hotel Golden Flower Bandung | 24 – 27 Januari 2011| Rp 7.250.000/person INTRODUCTION SCADA is an acronym for Supervisory...
3. DISTRIBUTED CONTROL SYSTEM (DCS) DISTRIBUTED CONTROL SYSTEM (DCS): PRINCIPLES AND APPLICATION Hotel Ibis, Yogyakarta | 14 – 17 Maret 2012 | Rp 7.250.000 Hotel Ibis, Yogyakarta | 25 – 28 Juni 2012 | Rp...
4. CONTROL SYSTEM FOR NON CONTROL ENGINEER CONTROL SYSTEM FOR NON CONTROL ENGINEER Hotel Ibis, Yogyakarta | 19 – 21 Maret 2012 | Rp. 5.500.000,- Hotel Ibis, Yogyakarta | 21 – 23 Juni 2012 | Rp. 5.500.000,-...
5. POWER MANAGEMENT SYSTEM POWER MANAGEMENT SYSTEM Hotel Ibis, Yogyakarta | 05 – 07 April 2012 | Rp 5.500.000 Hotel Ibis, Yogyakarta | 05 – 07 Juli 2012 | Rp 5.500.000 Hotel Ibis, Yogyakarta | 01 – 03...
6. ELECTRICAL MACHINES, DRIVES, TRANSFORMER AND POWER SYSTEM ELECTRICAL MACHINES, DRIVES, TRANSFORMER AND POWER SYSTEM Hotel Ibis, Yogyakarta | 09 – 11 April 2012 | Rp 5.500.000 Hotel Ibis, Yogyakarta | 12 – 14 Juli 2012 | Rp 5.500.000 Hotel...
7. FUZZY LOGIC & METERING LOAD CONTROL DISTRIBUTION SYSTEM: FUZZY LOGIC & METERING LOAD CONTROL Hotel Ibis, Yogyakarta | 07 – 10 Mei 2012 | Rp 7.250.000 Hotel Ibis, Yogyakarta |  10 – 13 September 2012 | Rp...
8. LIGTNING PROTECTION & GROUNDING SYSTEM LIGTNING PROTECTION & GROUNDING SYSTEM Hotel Ibis, Yogyakarta | 29 – 31 Maret 2012 | Rp 5.500.000 Hotel Ibis, Yogyakarta | 06 – 08 September 2012 | Rp 5.500.000     INTRODUCTION...
9. POWER DISTRIBUTION SYSTEM POWER DISTRIBUTION SYSTEM:  OPERATION AND CHARACTERISTIC Hotel Ibis, Yogyakarta |  16 – 18 April 2012 | Rp 5.500.000 Hotel Ibis, Yogyakarta | 18 – 20 Juni 2012 | Rp 5.500.000 Hotel...
10. ELECTRIC MOTOR SYSTEM ELECTRIC MOTOR SYSTEM : PRINCIPLES, APPLICATIONS & CONTROL Hotel Ibis, Yogyakarta | 09 – 12 Mei 2012 | Rp 7.250.000 Hotel Ibis, Yogyakarta | 17 – 20 September 2012 | Rp...

Updated By Admin2 • February 16, 2012