SYSTEM AND COST MAINTENANCE

SYSTEM AND COST MAINTENANCE

Bandung | 21 – 24 Juni 2016 | Rp 7.950.000,-/peserta
Bandung | 26 – 29 Juli 2016 | Rp 7.950.000,-/peserta
Bandung | 30 Agustus – 02 September 2016 | Rp 7.950.000,-/peserta
Bandung | 27 – 30 September 2016 | Rp 7.950.000,-/peserta

Jadwal Training 2016 Selanjutnya …

 


PENDAHULUAN :

Ongkos perawatan dalam undang-undang perpajakan didefinisikan sebagai pengeluaran atau belanja untuk perbaikan dan pemulihan dari kinerja peralatan, dalam hal ini masih mencakup pemotongan ongkos. Akan tetapi dalam kenyataannya di lapangan ongkos perawatan meliputi banyak faktor dan tidaklah mudah.

Dalam banyak kasus, proses penggantian komponen, dan perbaikan kecil atau modifikasi, banyak penentuan spesifikasi komponen yang kurang cermat,  sehingga dilakukan estimasi anggaran yang tidak cermat pula.

Apabila peralatan melewati periode kegagalan awal, dan memasuki periode kegagalan pemakaian, dan tatkala perbaikan atau modifikasi akan dilakukan kadangkala penggunaan biayanya diterapkan sebagai laporan modal termasuk di dalamnya laporan ongkos perbaikan. Perbaikan kecil dan modifikasi kecil termasuk ke dalam ongkos perbaikan. Pertimbangannya, dapat dipahami sehingga cakupan dari ongkos perawatan bisa berubah-ubah.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Sistem dan Ongkos Perawatan.



SIAPA SEBAIKNYA MENGIKUTI TRAINING INI ?:

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang perawatan mesin dan peralatan pada industri rekayasa.



TUJUAN TRAINING :

Setelah mengikuti training ini diharapkan peserta memiliki pemahaman lebih tentang pengetahuan sistem dan ongkos perawatan.



CAKUPAN MATERI TRAINING :

1.   This compulsory course forms basic understanding of    mechanical maintenance.

2.   Coverage includes, among others, classification of    maintenance, maintenance management and organisation.

3.   Weibull diagram (bath-tub curve).

4.   Total productive maintenance.

5.   Reliability centered maintenance.

6.   New paradigms in maintenance,

7.   Predictive maintenance.

8.   Pengertian ongkos perawatan

  • Ruang lingkup ongkos perawatan, klasifikasi ongkos perawatan, klasifikasi ongkos perawatan berdasarkan pola pengelolaannya.

9.   Sistem dan model perhitungan ongkos perawatan

  • Elemen-elemen ongkos perawatan, perhitungan ongkos perawatan

10. Pengurangan ongkos perawatan

  • Sudut pandang untuk pengurangan ongkos perawatan, tindakan yang diambil untuk mengurangi biaya perawatan

11. Estimasi ongkos dan penyusunan anggaran perawatan

  • Metode estimasi anggaran belanja perawatan, susunan anggaran belanja perawatan, pengendalian anggaran ongkos perawatan.



TRAINING INSTRUCTOR

SUGENG ISDWIYANUDI, Ir. MT. And Team

was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.


VENUE :

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION :

4 days

 

 

 

TRAINING TIME :  

  1. 21 Jun 2016-24 Jun 2016
  2. 26 Jul 2016-29 Jul 2016
  3. 30 Aug 2016-02 Sep 2016
  4. 27 Sep 2016-30 Sep 2016
  5. 25 Oct 2016-28 Oct 2016
  6. 28 Nov 2016-01 Dec 2016
  7. 27 Dec 2016-30 Dec 2016

 

INVESTATION PRICE/PERSON :

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days