By November 6, 2017 0 Comments Read More →

Troubleshooting and Operability Problem for Centrifugal Compressors

Troubleshooting and Operability Problem for Centrifugal Compressors

Hotel Ibis, Yogyakarta | 13 – 15 November 2017 | Rp 6.900.000,- per peserta
Hotel Ibis, Yogyakarta | 18 – 19 November 2017 (Weekend) | Rp 6.900.000,- per peserta
Hotel Ibis, Yogyakarta | 20 – 22 November 2017 | Rp 6.900.000,- per peserta
Hotel Ibis, Yogyakarta | 25 – 26 November 2017 (Weekend) | Rp 6.900.000,- per peserta

Jadwal Training 2017 Selanjutnya …

Hotel Ibis, Yogyakarta | 02 – 04 Januari 2018 | Rp 6.900.000,- per peserta
Hotel Ibis, Yogyakarta | 06 – 07 Januari 2018 (Weekend 2018) | Rp 6.900.000,- per peserta

Jadwal Training 2018 Selanjutnya …

 


 

DESKRIPSI

This training programme covers a study of gas compression and expansion laws applied to industrial processes. this covers theory, practice and troubleshooting applications of compressors usually encountered in plants, and their related aspects.

The objective of the programme is to provide a practical and experienced based approach to the problems posed by compressors and turbines and the means to solve them. With the knowledge gained in this programme, the participants shall be able to analyze the operating parameters and strive to improve the performance of these rotating machines.

 

MATERI TRAINING CENTRIFURGAL COMPRESSORS

Theory of compression

  • Ideal gas equation and practical application
  • Isentropic, polytropic, isothermal compression
  • Calculations mass and volume capacity
  • Practical compression laws
  • Discharge temperature
  • Power for compression
  • Characteristic curves

Axial and centrifugal compressors

  • Parts of compressors
  • Seals / sealing for compressors
  • Characteristic curves: invariant representations
  • Surge and stonewall; range of working efficiency
  • Capacity control methods
  • Start-up, vibration survey

Technology

  • Casings, diaphragms, stator, blades
  • Rotor, journal and thrust bearings, internal and shaft seals, coupling
  • Balance and critical speeds
  • Lubrication and seal systems
  • Typical mechanical incidents
  • Case studies

 

Peserta

Participants for the programme are those involved in operation,maintenance, process design, project and inspection engineers who are involved in compressor and steam turbine units.

 

Metode

Presentasi, Diskusi , Studi Kasus

 

 

Jadwal Training 2017

  • Hotel Ibis Malioboro ,Yogjakarta
  • 13 – 15 November 2017
  • 20 – 22 November 2017
  • 27 – 29 November 2017
  • 04 – 06 Desember 2017
  • 11 – 13 Desember 2017
  • 18 – 20 Desember 2017
  • 27 – 29 desember 2017

Jadwal Weekend

  • Hotel Ibis Malioboro ,Yogjakarta
  • 18 – 19 November 2017
  • 25 – 26 November 2017
  • 02 – 03 Desember 2017
  • 09 – 10 Desember 2017
  • 16 – 17 Desember 2017
  • 23 – 24 Desember 2017
  • 30 – 31 Desember 2017

 

Jadwal Training 2018

  • Hotel Ibis Malioboro ,Yogjakarta
  • 02 – 04 Januari 2018
  • 08 – 10 Januari 2018
  • 15 – 17 Januari 2018
  • 22 – 24 Januari 2018
  • 29 – 31 Januari 2018
  • 05 – 07 Februari 2018
  • 12 – 14 Februari 2018
  • 19 – 21 Februari 2018
  • 26 – 28 Februari 2018
  • 05 – 07 Maret 2018
  • 12 – 14 Maret 2018
  • 19 – 21 Maret 2018
  • 26 – 28 Maret 2018
  • 02 – 04 April 2018
  • 09 – 11 April 2018
  • 16 – 18 April 2018
  • 23 – 25 April 2018
  • 02 – 04 Mei 2018
  • 07 – 09 Mei 2018
  • 14 – 16 Mei 2018
  • 21 – 23 Mei 2018
  • 30 Mei – 01 Juni 2018
  • 04 – 06 Juni 2018
  • 25 – 27 Juni 2018
  • 02 – 04 Juli 2018
  • 09 – 11 Juli 2018
  • 16 – 18 Juli 2018
  • 23 – 25 Juli 2018
  • 30 Juli – 01 Agustus 2018
  • 06 – 08 Agustus 2018
  • 13 – 15 Agustus 2018
  • 20 – 21 Agustus 2018
  • 27 – 29 Agustus 2018
  • 03 – 05 September 2018
  • 12 – 14 September 2018
  • 17 – 19 September 2018
  • 24 – 26 September 2018
  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

 

Jadwal Training Weekend 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 06 – 07 Januari 2018
  • 13 – 14 Januari 2018
  • 20 – 21 Januari 2018
  • 27 – 28 Januari 2018
  • 03 – 04 Februari 2018
  • 10 – 11 Februari 2018
  • 17 – 18 Februari 2018
  • 24 – 25 Februari 2018
  • 03 – 04 Maret 2018
  • 10 – 11 Maret 2018
  • 17 – 18 Maret 2018
  • 24 – 25 Maret 2018
  • 31 Maret – 01 April 2018
  • 07 – 08 April 2018
  • 14 – 15 April 2018
  • 21- 22 April 2018
  • 28 – 29 April 2018
  • 05 – 06 Mei 2018
  • 12 – 13 Mei 2018
  • 19 – 20 Mei 2018
  • 26 – 27 Mei 2018
  • 02 – 03 Juni 2018
  • 09 – 10 Juni 2018
  • 30 Juni – 01 Juli 2018
  • 07 – 08 Juli 2018
  • 14 – 15 Juli 2018
  • 21 – 22 Juli 2018
  • 28 – 29 Juli 2018
  • 04 – 05 Agustus 2018
  • 11 – 12 Agustus 2018
  • 18 – 19 Agustus 2018
  • 25 – 26 Agustus 2018
  • 01 – 02 September 2018
  • 08 – 09 September 2018
  • 15 – 16 September 2018
  • 22 – 23 September 2018
  • 29 – 30 September 2018
  • 06 – 07 Oktober 2018
  • 13 – 14 Oktober 2018
  • 20 – 21 Oktober 2018
  • 27 – 28 Oktober 2018
  • 03 – 04 November 2018
  • 10 – 11 November 2018
  • 17 – 18 November 2018
  • 24 – 25 November 2018
  • 01 – 02 Desember 2018
  • 08 – 09 Desember 2018
  • 15 – 16 Desember 2018
  • 22 – 23 Desember 2018
  • 29 – 30 Desember 2018

 

 Investasi dan Fasilitas

  • Rp. 6.900.000 (Non Residential, Belum Termasuk Pajak PPn 10%)
  • VIP training Rp 8.900.000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Instruktur

Ir. Paryana Puspaputra, M.Eng. and Team

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

 

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment