By March 20, 2020 0 Comments Read More →

CENTRIFUGAL COMPRESSOR PERFORMANCE & CONDITION EVALUATION – Pasti Jalan

Seminar ini menyajikan strategi perawatan yang ekonomis namun tetap menjaga menjamin kualitas baik kompresor

Hotel Ibis Malioboro, Yogyakarta | 30 Maret – 01 April 2020 | Rp 6.900.000
Hotel Ibis Malioboro, Yogyakarta | 06 – 08 April 2020 | Rp 6.900.000
Hotel Ibis Malioboro, Yogyakarta | 13 – 15 April 2020 | Rp 6.900.000
Hotel Ibis Malioboro, Yogyakarta | 27 – 29 April 2020 | Rp 6.900.000 – RUN

Jadwal Training 2020 Selanjutnya …

 

DESKRIPSI TRAINING CENTRIFUGAL COMPRESSOR

The degree to which compressor are maintained today ranges from “wait until destruction” to a “complete” but extravagant program. This seminar presents maintenance strategies that are economical and yet assure required compressor availability. Participants review the fundamentals of compressor and the techniques for maintaining them. Participants examine proper methods of parts repair techniques as well as diagnostic tests for identifying and determining problems. Participants will study in depth preventive maintenance programs including the purpose of such programs and their planning and implementation.

 

MATERI TRAINING CENTRIFUGAL COMPRESSOR

  1. Compressor Types
    • Centrifugal
    • Helical screw
    • Reciprocating
    • Application ranges
    • Application ranges
    • Short cut selection methods
  2. Turbo compressor Maintenance
    • Overview of alignment methods
    • Predictive versus preventive strategies
    • Run-length extension surveys
    • Machinery turnaround planning
  3. Reciprocating Compressor Operation
    • Lubrication systems
    • Valves, valve problems and rebuilding
    • Packing and packing problems
    • Controls and cooling systems
  4. Saving Compressor Air Cost While Increasing Efficiency
    • The impact of artificial demand
    • Today’s compressor control
    • Realistic leak management
    • Stabilizing a compressed air system
    • Compressed air dryers
  5. Reciprocating Compressor Preventive Maintenance
    • Types of maintenance programs
    • Purpose of preventive maintenance
    • Inspection and inspection forms
    • Vendor and contractor requirements
    • Planning and implementation
  6. Overhaul and Repair of Reciprocating Compressors
    • Methods of repair and overhaul
    • Alignment and piston rod run out
    • Foundation problems and repair
    • Component repair and rebuilding
  7. Troubleshooting Compressor Problems
    • Basic approaches to compressor troubleshooting
    • Typical problems and solutions
    • Diagnostic test
    • Examples from recent failure incidents

 

PESERTA TRAINING

  • Plant and maintenance engineers
  • Maintenance managers and supervisors and compressor specialists

 

METODE TRAINING

Presentasi, Diskusi , Studi Kasus

 

Jadwal Training 2020

  • Hotel Ibis Malioboro, Yogyakarta
  • 30 Maret 2020 – 1 April 2020
  • 6 – 8 April 2020
  • 13 – 15 April 2020
  • 20 – 22 April 2020
  • 27 – 29 April 2020
  • 4 – 6 Mei 2020
  • 11 – 13 Mei 2020
  • 2 – 4 Juni 2020
  • 8 – 10 Juni 2020
  • 15 – 17 Juni 2020
  • 22 – 24 Juni 2020
  • 29 Juni 2020 – 1 Juli 2020
  • 6 – 8 Juli 2020
  • 13 – 15 Juli 2020
  • 20 – 22 Juli 2020
  • 27 – 29 Juli 2020
  • 3 – 5 Agustus 2020
  • 10 – 12 Agustus 2020
  • 18 – 19 Agustus 2020
  • 24 – 26 Agustus 2020
  • 31 Agustus 2020 – 2 September 2020
  • 7 – 9 September 2020
  • 14 – 16 September 2020
  • 21 – 23 September 2020
  • 28 – 30 September 2020
  • 5 – 7 Oktober 2020
  • 12 – 14 Oktober 2020
  • 19 – 21 Oktober 2020
  • 26 – 28 Oktober 2020
  • 2 – 4 November 2020
  • 9 – 11 November 2020
  • 16 – 18 November 2020
  • 23 – 25 November 2020
  • 30 November 2020 – 2 Desember 2020
  • 7 – 9 Desember 2020
  • 14 – 16 Desember 2020
  • 21 – 23 Desember 2020
  • 28 – 30 Desember 2020

 

INVESTASI DAN FASILITAS

  • Rp 6.900.000 (Non Residential, Belum Termasuk Pajak PPn 10%)
  • Jika Perusahaan /Instansi mengirimkan lebih dari satu peserta pada judul dan tanggal yang sama maka akan di berikan potongan harga pada peserta kedua dan seterusnya masing – masing sebesar Rp 1.000.000 per peserta.
  • VIP training Rp 8.900.000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas: Certificate, Training kits, USB, Lunch, Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/ Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 3 peserta)

 

INSTRUKTUR TRAINING

Ir. Paryana Puspaputra, M.Eng. and Team

 

CENTRIFUGAL COMPRESSOR PERFORMANCE & CONDITION EVALUATION

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. blankCaptcha
 

cforms contact form by delicious:days

blank

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment