LOW AND MEDIUM VOLTAGE: ELECTRICAL MAINTENANCE (Pasti Jalan)

Pelatihan electrical maintenance ini akan membahas perawatan listrik dengan tegangan rendah dan menengah

Yogyakarta/ Semarang/ Solo | 09 – 10 Desember 2019 | Rp. 6.400.000,-
Bandung/ Jakarta/ Surabaya | 16 – 17 Desember 2019 | Rp. 7.400.000,-
Bali/ Batam/ Balikpapan/ Manado/ Lombok | 23 – 24 Desember 2019 | Rp. 8.400.000,-

Jadwal Training 2019 Selanjutnya …

Bandung | 20 – 21 Januari 2020 | Rp. 7.400.000,- PASTI JALAN

Jadwal Training 2020 Selanjutnya …

 

 

Deskripsi Training Low and Medium Voltage

The backbone of many electric power systems is the medium voltage distribution system. Typically operating at voltages ranging from 2,400 to 34,500 Volts, voltage stress, corona, surges and protection of equipment all create unique challenges in design, equipment selection, operation and engineering. This 2 day class takes you through the basics of medium voltage power systems including components, equipment, design and operation problems as well as protection of medium voltage systems.

 

Materi Training Low and Medium Voltage

  1. INTRODUCTION
  2. MEDIUM VOLTAGE SAFETY
  • Electrocution at Low vs. Medium Voltage, Arc Flash,
  • Qualified Person, Approach Boundaries
  1. TYPES OF MEDIUM VOLTAGE SYSTEMS
  • Utility and Industrial One lines, Reliability Requirements,
  • Overhead and Underground Systems, Regulated Systems
  1. MEDIUM VOLTAGE CABLE
  • Copper vs. Aluminum Design, Voltage Ratings
  • Insulation Ratings, 100%, 133%, 173% Insulation Levels,
  • Shielding Requirements, Electric Fields, Terminating MV
  • Conductors, Orientation of Overhead Lines
  1. MEDIUM VOLTAGE SUBSTATION TRANSFORMERS
  • Core and Coil Design, Aluminum and Copper Windings
  • Tank Construction, Loss Evaluation, Efficiency, Regulation
  1. SPOT NETWORKS
  • Spot Network Design, Network Protectors, Network Protector
  • Relay Operation, Directional Protection Requirements
  1. PARTIAL DISCHARGE
  • Corona, Surface Tracking, Voltage Stress, Sensing Partial
  • Discharge, Component Failure
  1. GROUNDING MEDIUM VOLTAGE SYSTEMS
  • Resistance Grounding, Solid Grounding, Ungrounded Delta
  • Charging Current, Effect of Ground Faults on Delta Voltage
  1. SURGE PROTECTION
  • Lightning and Switching Surges, Classes of Surge Arresters
  • MCOV Ratings – (Maximum Continuous Operating Voltage)
  • TOV – (Maximum Temporary Over Voltage Capability),
  • Protective Characteristics, Surge Arrester Selection, Energy
  • Capability, Effect of Grounding on Arrestor Selection,
  • Insulation Coordination,
  1. CURRENT TRANSFORMER APPLICATIONS
  • Ratings, Selection Process, Accuracy, Saturation, Excitation
  • Curves, Burden Calculation, Momentary Ratings
  1. MEDIUM VOLTAGE CIRCUIT BREAKERS
  • Vacuum, Air, Oil, SF6 Designs, Symmetrical Interrupting
  • Rating, K-Rated Voltage Factor, Close and Latch Capability
  1. RECLOSERS
  • Application on Feeder Circuits, Recloser Settings
  • Continuous Current and Interrupting Ratings
  1. MEDIUM VOLTAGE FUSES
  • Medium Voltage Switches, Load Rating, Close and Latch
  • Rating, Short Time Rating, Expulsion vs. Current Limiting
  • Fuse Characteristics, E and R Rated Fuses, Fuse Cutouts
  1. MEDIUM VOLTAGE PROTECTION CONCEPTS
  • Medium Voltage Protection, Relays, Circuit Breakers, R and
  • E rated Fuses, Short Circuit vs. Overcurrent Protection
  1. DISTRIBUTION FEEDER PROTECTION
  • Protection with Fuses – 300%, Overcurrent Protection with
  • Relays – 600%, Short Circuit Damage Characteristics, Relay
  • “Reach” for End of Line Faults
  1. ROTATING MACHINERY PROTECTION
  • Requirements, Decrement Curves, Thermal Damage Curves,
  • Reactive, Capability Curves, Differential Protection
  1. MEDIUM VOLTAGE MOTOR CONTROLLERS
  • Protection Requirements, Motor Management Relays, Circuit
  • Breaker Protection, Relaying, Class R Rated Fuses
  1. TRANSFORMER PROTECTION
  • ANSI C57 Thru Fault Curves, Impact of Transformer Winding
  • Configuration, Overview of Differential Protection, Inrush and
  • Harmonic Restraint

 

Peserta Training Low and Medium Voltage

  • D3 atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau setara.
  • Teknisi, Operator dan Supervisor didalam bidang management kelistrikan dan atau non teknik.
  • Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.

 

Metode Training Low and Medium Voltage

Presentasi, lecture, studi kasus, tanya jawab, brainstorming, diskusi.

 

Waktu  Dan Tempat Training

  • Hotel Maxone, Bali
  • Hotel Nagoya Plaza, Batam
  • Hotel Fave, Balikpapan
  • Hotel Aston, Manado
  • Hotel Lombok Raya, Mataram
  • Hotel 101 Dago , Bandung
  • Hotel Mercure Grand Mirama, Surabaya
  • Hotel Ibis Senen , Jakarta
  • Hotel Ibis Solo
  • Hotel Ibis Simpang Lima, Semarang
  • Hotel Melia Purosani, Yogyakarta
  • 09 – 10 Desember 2019
  • 16 – 17 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

Jadwal Training 2020

  • Hotel Santika Kuta, Bali
  • Hotel Biz, Batam
  • Hotel NEO, Balikpapan
  • Hotel Aston, Manado
  • Hotel Lombok Raya, Mataram
  • Hotel Serela Merdeka, Bandung
  • Hotel Santika Pandegiling, Surabaya
  • Hotel Ibis Senen, Jakarta
  • Hotel Ibis, Solo
  • Hotel Ibis Simpang Lima, Semarang
  • Hotel Melia Purosani, Yogyakarta
  • 6 – 7 Januari 2020
  • 13 – 14 Januari 2020
  • 20 – 21 Januari 2020
  • 27 – 28 Januari 2020
  • 3- 5 Februari 2020
  • 10 – 11 Februari 2020
  • 17 – 18 Februari 2020
  • 26 – 27 Februari 2020
  • 2 – 3 Maret 2020
  • 9 – 10 Maret 2020
  • 16 – 17 Maret 2020
  • 23 – 24 Maret 2020
  • 30 – 31 Maret 2020
  • 6 – 7 April 2020
  • 13 – 14 April 2020
  • 20 – 21 April 2020
  • 27 – 28 April 2020
  • 4 – 5 Mei 2020
  • 11 – 12 Mei 2020
  • 2 – 3 Juni 2020
  • 8 – 9 Juni 2020
  • 15 – 16 Juni 2020
  • 22 – 23 Juni 2020
  • 29 – 30 Juni 2020
  • 6 – 7 Juli 2020
  • 13 – 14 Juli 2020
  • 20 – 21 Juli 2020
  • 27 – 28 Juli 2020
  • 3 – 4 Agustus 2020
  • 10 – 11 Agustus 2020
  • 18 – 19 Agustus 2020
  • 24 – 25 Agustus 2020
  • 31 Agustus 2020 – 1 September 2020
  • 7 – 8 Sepember 2020
  • 14 – 15 September 2020
  • 21 – 22 September 2020
  • 28 – 29 September 2020
  • 5 – 6 Oktober 2020
  • 12 – 13 Oktober 2020
  • 19 – 20 Oktober 2020
  • 26 – 27 Oktober 2020
  • 2 – 3 November 2020
  • 9 – 10 November 2020
  • 16 – 17 November 2020
  • 23 – 24 November 2020
  • 30 November 2020 – 1 Desember 2020
  • 7 – 8 Desember 2020
  • 14 – 15 Desember 2020
  • 21 – 22 Desember 2020
  • 28 – 29 Desember 2020

 

Investasi dan Fasilitas Training Low and Medium Voltage

  • 8.400.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • 7.400.000 (Non Residential, Belum Terasuk Pajak PPn 10%)) untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.400.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk Lokasi Solo, Semarang atau YogyakartaQuota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB, Lunch, Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Instruktur Training Low and Medium Voltage

Tugino, ST.,MT dan Tim

 

ELECTRICAL MAINTENANCE LOW AND MEDIUM VOLTAGE

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days