By September 6, 2017 0 Comments Read More →

OIL AND GAS PROCESSING PLANT DESIGN AND OPERATIONS – Pasti Jalan

OIL AND GAS PROCESSING PLANT DESIGN AND OPERATIONS

Yogyakarta | 12 – 15 September 2017 | Rp. 7.950.000/peserta – PASTI JALAN
Yogyakarta | 10 – 13 Oktober 2017 | Rp. 7.950.000/peserta
Yogyakarta | 14 – 17 November 2017 | Rp. 7.950.000/peserta
Yogyakarta | 04 – 07 Desember 2017 | Rp. 7.950.000/peserta

 

 

 

INTRODUCTION :

Pelatihan ini bertujuan untuk memberikan pengetahuan dan pemahaman tentang rancangan (design), dan operasi dari plant pemrosesan minyak dan gas. Pelatihan akan diawali dengan pembahasan mengenai sifat dan karakteristik dari hydrocarbon sebagai komponen utama penyusun minyak dan gas. Selanjutnya akan dilakukan overview terhadap proses atau operasi yang digunakan dalam pengolahan minyak dan gas. Berdasarkan pengetahuan dan pemahaman tentang sifat dan karakteristik minyak/gas dan proses atau operasi yang digunakan dalam pengolahan gas tersebut, maka pembahasan mengenai rancangan (design) dapat dilakukan. Dalam pelatihan ini, selain metode pemaparan, akan banyak dilakukan diskusi dan latihan-latihan perhitungan, sehingga peserta akan lebih banyak aktif. Beberapa software yang diperlukan dalam design juga akan digunakan dalam pelatihan ini, dan peserta diharapkan untuk aktif berlatih. Secara umum, setelah mengikuti pelatihan ini, peserta diharapkan akan mendapatkan tambahan pengetahuan dan pemahaman tentang proses atau operasi serta rancangan (design) dalam pengolahan minyak dan gas.

 

TRAINING MATERIAL OUTLINE:

Introduction to Oil and Gas Processing Plant Design and Operations

Hydrocarbon Properties & Characteristics

  • molecular weight,
  • heat of combustion,
  • heat of vaporization, etc

Oil and Gas Specification

  • LNG,
  • LPG,
  • condensate,
  • gasoline, kerosene, etc

Crude Oil Separation

  • oil-gas-water separation,
  • KO drum, etc

Oil and Gas Conditioning

  • sweetening,
  • dehydration

Oil & Gas Fractionation/Distillation

  • vapor-liquid equilibrium,
  • vapor pressure,
  • partial pressure concept,
  • plate column

Heat Exchanger

  • energy calculation and audit in heat exchanger
  • plate heat exchanger,
  • shell & tube,
  • double pipe,
  • heat transfer,

Process Design

  • design calculation,
  • McCabe & Thiele for fractionation design, etc

Discussion and Case Study.

 

 

INSTRUCTOR:

Ir. M. Syahri, MT, Ph.Dand Team

Ir. M. Syahri, MT, Ph.D  is alumnus from UPN “Veteran” Yogyakarta (UPNYK) and Institute of Technology (ITB) department of Chemical Engineering. Also alumnus from University Kebangsaan Malaysia (UKM) department Mechanical and Material Engineering. He has been as researcher at Oil and Gas; Renewable Energy Laboratory UPNYK, he is also being as Senior Surface Facility Engineer in some project and Training Instructor. Some projects have been handled by him such as Senior Surface Facility Engineer, Plant of Development TAC Ramba-Pertamina Field, Sumbagsel (2008); Plant of Further Development East Pamanukan Field, Pertamina DOH Cirebon – Rainbow Emerald (2007); Plant of Further Development Nglobo Field, Pertamina DOH JBT – Cepu (2005); Plant of Further Development Ketaling Barat Field, Pertamina DOH Sumbagteng – Jambi (2005); Also as Reviewer Team BP MIGAS, East Kalimantan Gas Deliverability (Vico, Chevron, TOTAL) (2007).He also gave many courses to the companies, such as: Basic Ammonia Storage, Transfer Equipment and Major Hazards Impact; Dehydration Process (Oil and Gas Operation); Clean Water Processing & Treatment for Industrial Application; Principle of Chemical Process Industry for non Engineer; Boiler Feed Water Treatment & Trouble shooting; Hazarous Materials Safe Handling;Basic Principle For steam Reformer, Shift Reaction, Operability Problem & trouble shooting; CO2 Removal Technology (Absorber, Striper) Trouble shooting and Operability impact; Catalitic Reactor in Ammonia Industry (Desulfurizer, Methanator, Steam Reformer, Ammonia Converter); Basic Fundamental Ammonia Synthesis, ARU And Process in Middle End Area; Inspection of Insulated Pipes Defects and Repairs Techniques; Emergency Handling in Ammonia Industry; etc.

VENUE :

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

TRAINING DURATION OIL AND GAS PROCESSING PLANT DESIGN AND OPERATIONS

4 days

TRAINING TIME

  1. 12 Sep 2017-15 Sep 2017
  2. 10 Oct 2017-13 Oct 2017
  3. 14 Nov 2017-17 Nov 2017
  4. 04 Dec 2017-07 Dec 2017

INVESTMENT PRICE/PERSON :

  1. Rp.7.950.000/person (full fare) or
  2. Rp.7.750.000/person (early bird, payment 1 week before training) or
  3. Rp.7.500.000/person (if there are 3 persons or more from the same company)

 

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

Post a Comment