DISTRIBUTED CONTROL SYSTEM (DCS) – ALMOST RUNNING

Setelah mengikuti pelatihan ini peserta akan memahami prinsip perawatan dan troubleshooting Distributed Control System (DCS) 

Bandung | 24 – 26 September 2019 | Rp 9.750.000 – ALMOST RUNNING
Bandung | 30 September – 04 Oktober 2019 | Rp 9.750.000/ peserta
Bandung | 25 – 29 November 2019 | Rp 9.750.000/ peserta 
Bandung | 09 – 13 Desember 2019 | Rp 9.750.000/ peserta

 

DCS TRAINING OBJECTIVE

After completing this course, participants will be able to understand the principles of maintenance and troubleshooting of DCS hardware and software, diagnose DCS component status, and also manage and respond to process interface including Operation and Monitoring. To be able to program, to develop monitoring interface system. Engineering programming including Function Block and Human Machine Interface ,   access operator interface display, to manipulate various control modules, operate system trending, manage and respond to process alarm/ event, monitor process performance, view real-time and historical trend data, diagnose DCS component status, etc .

 

DCS TRAINING OUTLINE

  1. DCS Introduction
  2. DCS Hardware Component and architecture
  3. Hardware Installations and Design
  4. Hardware Commissioning
  5. Software Feature Exploring
  6. Hardware General Problem and Troubleshooting
  7. DCS Diagnostic
  8. Function Block Programming and I/O Addressing system and wiring
  9. DCS Programming
  10. PID Regulatory Control Programming
  11. PID Tuning
  12. Human Machine Interface(HMI System)
  13. Alarm Management system
  14. Process and Event Historical
  15. DCS Security

 

TRAINING INSTRUCTOR

Ir. Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia. He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung. He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

 

VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION

5 days

 

JADWAL TRAINING 2019

  1. 23 Sep 2019-27 Sep 2019
  2. 30 Sep 2019-04 Okt 2019
  3. 25 Nop 2019-29 Nop 2019
  4. 09 Des 2019-13 Des 2019

 

INVESTATION PRICE /PERSON

  1. Rp 9.750.000/ person (full fare) or
  2. Rp 9.500.000/ person (early bird, payment 1 week before training) or
  3. Rp 9.250.000/ person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Training CD contains training material
  3. For practice session: All softwares related to this training is supplied and installed to participants’ laptop/notebook by provider team / instructor
  4. Certificate
  5. Stationeries: NoteBook and Ballpoint
  6. Jacket or waistcoat or T-Shirt
  7. Bag or backpackers
  8. Training Photo
  9. Training room with full AC facilities and multimedia
  10. Once lunch and twice coffeebreak every day of training DCS
  11. Qualified  instructor
  12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

DISTRIBUTED CONTROL SYSTEM (DCS):  PRINCIPLES, MAINTENANCE, OPERATION, PROGRAMMING AND TROUBLESHOOTING

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days