GAS COMPRESSOR : OPERATION, MAINTENANCE & TROUBLESHOOTING
GAS COMPRESSOR: OPERATION, MAINTENANCE & TROUBLESHOOTING
Hotel Golden Flower Bandung | 12 – 15 December 2011 | Rp 7.250.000/person
Hotel Golden Flower Bandung | 13 – 16 February 2012 | Rp 7.250.000/person
Hotel Harris Tuban Bali / Hotel Bintang *** | 07 – 10 May 2012 | Rp 8.750.000/person
Hotel Golden Flower Bandung | 23 – 26 July 2012 | Rp 7.250.000/person
Hotel Golden Flower Bandung | 22 – 25 October 2012 | Rp 7.250.000/person
TRAINING OBJECTIVE
After completion of the course, the participants should be able to describe and demonstrate thoroughly of gas-compressors. Identify component by names, operation, maintenance and inspection. Describe the proper care, removal alignment and installation of gas-compressors and their accessories.
WHO SHOULD ATTEND
Gas-compressor operator, supervisor, and to whom may concern in gas-compressor operation and maintenance.
TRAINING MATERIAL OUTLINE
- Fundamental of fluid mechanics and thermodynamic
- Properties of fluids
- Measurement unit
- Basic of fluids dynamic
- Energy losses in pipe installation
- The gas Laws
- Specific Heat
- Compression process
- Isothermal
- Adiabatic
- Polytrophic
- Compression Work
- Multistage compression
- Pressure loss at gas pipe installation
- Definition and accuracy
- Factors to estimate friction loss
- Pressure gradient in pipe
- General equation of various gas
- Natural gas piping equation
- Vacuum piping equation
- Fitting pressure loss
- Flexible pipe pressure loss
- Fundamental theory of compressor
- Compressor development history
- Compressor classification
- Compressor work cycle
- Theoretic cycle
- Semi theoretic cycle
- Actual cycle
- Centrifugal compressor
- Head, losses and efficiency
- Characteristic at each speed
- Compressor installation
- Dynamic Compressor
- Performance & condition definition
- Type of centrifugal compressor
- High casing
- Horizontal split casing
- Vertical split casing
- Package assembly
- Multi casing unit
- Centrifugal compressor application
- Characteristic of centrifugal compressor
- General detail of centrifugal compressor
- Impeller
- Diaphragm
- Inter stage packing
- Rotor assembly
- Casing
- Journal and thrust bearing
- Shaft seals
- Seal and lubrication system
- Gas cooling
- Pressure ratio and centrifugal characteristic curve
- Control of capacity
- Load curve
- Control method
- Surge control
- Parallel operation
- Unloading start
- Inner gear air centrifugal compressor
- Modulation pressure control
- Dual step capacity control
- Auto dual control
- Axial flow compressor
- Positive Compressor
- Application of theory
- Reciprocating compressor
- Clearance control
- Clearance control and variable compression ratio
- Effect of heat specific ratio to horse power
- Peak horse power and break horse power
- Effect of compressibility
- Effect of altitude
- Reciprocating compressor
- Definition
- Characteristic
- Classification
- Cylinder
- Valve
- Cylinder cooling
- Non-cooled cylinder
- Air cooling cylinder
- Capacity control
- Manual control
- Main automatic control
- Load depletion to start
- Types of control
- Constant speed control
- Suction side throttling
- Variable speed control
- Application of theory
- Installation, operation and maintenance
- Installation
- Placement
- Suction condition
- Foundation
- Piping
- Electric cabling
- Field testing
- Commissioning
- Running test
- Operation
-
- Responsibility
- Recording
- Cleaning
- Lubrication
- Safety
- Initial start
- Capacity control
- Spare parts
- Trouble shooting
- Inspection and maintenance
- Preventive maintenance
- Predictive maintenance
- Installation
INSTRUCTOR
Ir. I Nengah Diasta, M.Eng. is graduated from Bandung Institute of Technology (ITB), and till now he is a lecturer at mechanical engineering Bandung Institute of Technology majoring on fluid mechanics and fluid machineries. He has followed many courses for his competencies supporting, such as Application of Pumps and Turbines in Industries, Industrial Application of Fluid Machinery, Drafting of Patent Applications, Computational Fluid Dynamics, Turbo Pumps and Turbines, Application of Turbo Type of Fluid Machinery, Industrial Application of Pumps and Renewable Energies, Effective Energy Systems For Preservation of The Environment, Application of Fluid Machinery Focused on Energy Conservation, and etc.
Ir. I Nengah Diasta, M.Eng. has much experiences in real practical work in project implementation and has collaborated with many institution and companies.
Ir. I Nengah Diasta, M.Eng. has been frequently teaching training class for many companies in Indonesia on some topics in his core expertise such as Pump Operation and Maintenance, pump and compressor, pneumatic system and maintenance, compressor and gas turbine, Centrifugal Pump: Selection, Operation, and Maintenance, Centrifugal Gas Compressor: Anti Surge Control, Hydraulic Power System, Gas Compressor and Anti Surge Control, Service & Maintenance for Fixed Machines, Rotating Equipment, Gas Compression System and Operation, Basic Rotating Machinery as Program on Basic Maintenance/Generalities for Control System Supervisor Training, Fundamentals of Pipeline Hydraulic, Gas Pipeline Hydraulic, Aplication of Termo-Fluid in Manufacture Industry, and etc. Many Indonesian companies training participants have been taught by him such as PT PERTAMINA, PT Pupuk Kaltim, PT TELKOM, ARCO, PT.CALTEX, Total E&P Indonesie, CONOCOphillips, PT PLN (Persero), PT Pupuk Kujang, Arun, PT Badak, PT Semen Andalas, PT TGI, PT Astra, PT CPI, CNOOC SES Ltd, and many others.
VENUE
- Hotel Golden Flower Bandung
- Hotel Harris Tuban Bali / Hotel Bintang ***
TRAINING DURATION
4 days
TRAINING TIME
- 12 – 15 December 2011
- 13 – 16 February 2012
- 07 – 10 May 2012
- 23 – 26 July 2012
- 22 – 25 October 2012
INVESTATION PRICE/PERSON
Bandung
- Rp 7.250.000/person (full fare) or
- Rp 7.000.000/person (early bird, payment 1 week before training) or
- Rp 6.750.000/person (if there are 3 persons or more from the same company)
Bali
- Rp 8.750.000/person (full fare) or
- Rp 8.500.000/person (early bird, payment 1 week before training) or
- Rp 8.000.000/person (if there are 3 persons or more from the same company)
FACILITIES FOR PARTICIPANTS
- Training Module
- Training CD Contains Training Material
- Certificate
- Stationeries: NoteBook and Ballpoint
- Jacket or Waistcoat or T-Shirt
- Bag or Backpackers
- Training Photo
- Training Room with Full AC Facilities and multimedia
- Once lunch and twice coffeebreak every day of training
- Qualified instructor
- Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)
cforms contact form by delicious:days
Popularity: 1% [?]
Related training:
- PUMP & COMPRESSOR: Control, Operation, Maintenance & Troubleshooting PUMP & COMPRESSOR: Control, Operation, Maintenance & Troubleshooting Hotel Grage Ramayana, Malioboro Yogyakarta | 20 – 22 Desember 2011 | Rp 7.500.000,-/ peserta Hotel Grage Ramayana, Malioboro Yogyakarta | 14...
- Compressor Operation, Maintenance & Troubleshooting Compressor Operation, Maintenance & Troubleshooting Hotel Ibis, Yogjakarta | 24-26 Januari 2012 | Rp. 5.500.000 Per Peserta Hotel Ibis, Yogjakarta | 30 Januari – 1 Februari 2012 | Rp. 5.500.000...
- CENTRIFUGAL GAS COMPRESSOR OPERATION AND MAINTENANCE – Yogyakarta CENTRIFUGAL GAS COMPRESSOR OPERATION AND MAINTENANCE – Yogyakarta Ibis Hotel, Yogyakarta | 10- 12 Januari2012 | IDR 6.000.000 per peserta – non residential Ibis Hotel, Yogyakarta | 21-23 Februari 2012 |...
- COMPRESSOR AND PRIME MOVER OPERATION & MAINTENANCE COMPRESSOR AND PRIME MOVER OPERATION & MAINTENANCE Hotel Golden Flower Bandung | 16 – 18 January 2012 | Rp 5.750.000/person Hotel Golden Flower Bandung | 14 – 16 May 2012 | Rp 5.750.000/person Hotel...
- COMPRESSOR: Technique, Operation and Maintenance COMPRESSOR: Technique, Operation and Maintenance Bandung | May 22-25, 2012 | IDR 8.250.000,-/ Person DESCRIPTION Compressor is one of energy convert machine which used in many industries. By knowing the...
- Pump and Compressor : Maintenance and Troubleshooting – YOGYAKARTA Pump and Compressor: Maintenance and Troubleshooting - YOGYAKARTA Jogja Plaza, Yogyakarta | 24-26 Januari 2012 | IDR 5.500.000,- Jogja Plaza, Yogyakarta | 21-23 Februari 2012 | IDR 5.500.000,- Jogja Plaza, Yogyakarta | 17-20...
- BASIC GAS COMPRESSOR : OPERATION & MAINTENANCE BASIC GAS COMPRESSOR: OPERATION & MAINTENANCE Hotel Golden Flower Bandung | 19 – 21 Maret 2012 | Rp 5.250.000/peserta Hotel Golden Flower Bandung | 16 – 18 Juli 2012 | Rp...
- COMPRESSOR : Operation, Maintenance and Troubleshooting COMPRESSOR : Operation, Maintenance and Troubleshooting Hotel Golden Flower, Bandung | 24 – 26 Oktober 2011 | Rp 5.500.000/person TUJUAN TRAINING : Training ini bertujuan untuk : Memahami prinsip kerja...
- Reciprocating Compressor: Operation and Maintenance Reciprocating Compressor: Operation and Maintenance Santika Hotel, Bali | July 5-8, 2010| Rp.7.250.000,- OBJECTIVE Give general description of air compression theory to optimalize compression process efficiently Give fundamental knowledge of compressor...
- CENTRIFUGAL PUMP : Selection, Operation, and Maintenance CENTRIFUGAL PUMP: Selection, Operation, and Maintenance Hotel Golden Flower Bandung | 12 – 16 March 2012 | Rp 7.750.000/person Hotel Golden Flower Bandung | 11 – 15 June 2012 |...
