DRILLING ENGINEERING

BASIC DRILLING ENGINEERING

Bandung | 27 – 29 Mei 2019 | Rp. 7.950.000 Per Peserta
Bandung | 17 – 19 Juni 2019 | Rp. 7.950.000 Per Peserta
Bandung | 22 – 24 Juli 2019 | Rp. 7.950.000 Per Peserta
Bandung | 19 – 21 Agustus 2019 | Rp. 7.950.000 Per Peserta

Jadwal Training 2019 Selanjutnya …

 

 

DRILLING ENGINEERING COURSE DESCRIPTION

This course will address the basic steps required by the well construction team (drillers, engineers, geoscientists) to develop a robust well plan from basic data available from seismic and offset wells. This course is focused on the fundamentals issues that must be addressed in the drilling plan and during well execution to insure safety and optimum performance. The course will deliver unmatched attention to early diagnostic trends of well problems and provide proactive preventive measures, a fundamental milestone to drilling optimization. The participants will walk away from this course carrying a solid understanding of drilling planning, optimum execution strategies, and well informed on safety issues throughout the well construction process. In addition, the participant will appreciate the importance of team building and communication in the overall success of the drilling project. The course will include a healthy mix of fundamentals and contemporary state of the art drilling topics.

 

DESIGNED FOR

Anyone who is connected with well construction from the planning phase to post mortem including drillers, engineers, geologists, geophysicists, and environmental engineers.

 

YOU WILL LEARN

Participants will learn:

1. Solid understanding of drilling planning, optimum execution strategies, and well informed on safety issues throughout the well construction process.
2. The importance of team building and communication in the overall success of the drilling project.
3. Fundamentals and contemporary state of the art drilling topics.

 

DRILLING ENGINEERING TRAINING MATERIAL OUTLINE

1. Rig Selection and basic planning steps
   1. Types of wells
   2. Types of rigs
   3. Steps to drill oil or gas wells
   4. The well construction team
   5. Well costing
   6. Communications and safety issues.
2. Basic pore pressure and fracture gradient estimation
   1. Units and terminology and basic definitions
   2. Geopressure and well design consideration
   3. Causes of overpressure
   4. Pore pressure theory
   5. Real time diagnostics of pore pressure
   6. Overburden gradient estimation
   7. Fracture gradient estimation
   8. LOT analysis
   9. Casing seat selection
   10. Uncertainty analysis.
3. Drilling Fluid and Hydraulics Design: Proactive Maintenance
   1. Types and functions of drilling fluids
   2. Drilling fluid properties
   3. Review of basic drilling fluid systems and their applications
   4. Solids analysis
   5. Solids control economics
   6. Trends that indicate solids problems
   7. Overview of best practices to optimize solids removal
   8. Rig site assessment of solids removal system efficiency (rig audit)
   9. Basics of a hydraulic system design
   10. Hole cleaning in vertical wells
   11. Hole cleaning in deviated wells
4. Casings and Drill String Design
   1. Casing functions, types, and connections
   2. Steel properties
   3. Casing strength properties
   4. Casing specification
   5. Casing design principals and design factors
   6. Drill string components
   7. Grades
   8. Tool joints
   9. Weight on bit
   10. Drill string washout
   11. Drill collars design
   12. Drill string design
   13. Drill string failure.
5. Cementing Practices
   1. Manufacture and chemistry of oil well cement
   2. Laboratory testing and evaluation of cement properties
   3. Cementing jobs – planning and quality control
   4. Execution, monitoring and evaluation of cement jobs
   5. Special cement system design and operation
   6. Cement job planning and evaluation for deviated and horizontal wells
6. Directional, Horizontal, and Multilateral Drilling
   1. Applications for directional drilling
   2. Directional profiles
   3. Extended reach wells
   4. Survey calculations and accuracy
   5. Dogleg severity calculations and problems associated with doglegs
   6. Planning directional and horizontal wells
   7. Horizontal drilling methods and applications
   8. Logging high angle wells
   9. Hole-cleaning
   10. Multi-laterals
   11. Types of survey instruments
   12. Tools used to deflect a wellbore
   13. Torque and drag calculations
   14. Cementing
7. Hole Problems
   1. Loss of circulation
   2. Shale problems
   3. Stuck pipe
8. Well Control
   1. Cause of kicks
   2. Kick warning signs
   3. Kick indicators
   4. Shut in procedures
   5. Kill methods
   6. BOP equipments
9. Economy of Drilling Engineering
10. Final Evaluation

 

INSTRUCTOR :  Dr.-Ing. Bonar Tua Halomoan Marbun  and Team

 

VENUE : Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION :  3 days

 

JADWAL TRAINING 2019

1. 27 Mei 2019-29 Mei 2019
2. 17 Jun 2019-19 Jun 2019
3. 22 Jul 2019-24 Jul 2019
4. 19 Agust 2019-21 Agust 2019
5. 16 Sep 2019-18 Sep 2019
6. 21 Okt 2019-23 Okt 2019
7. 18 Nop 2019-20 Nop 2019
8. 02 Des 2019-04 Des 2019

 

INVESTMENT PRICE/PERSON :

1. Rp. 7.950.000/person (full fare) or
2. Rp. 7.750.000/person (early bird, payment 1 week before training) or
3. Rp. 7.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with Full AC facilities and multimedia
9. Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days