DYNAMIC OF MACHINE TOOLS

Setelah mengikuti training dynamic of machine tools ini peserta akan lebih memahami tentang pengetahuan dinamika mesin perkakas

Bandung | 25 – 28 Agustus 2020 | Rp 8.500.000/ peserta
Bandung | 14 – 17 September 2020 | Rp 8.500.000/ peserta
Bandung | 27 – 30 Oktober 2020 | Rp 8.500.000/ peserta

Jadwal Training 2020 Selanjutnya …

 

 

PENDAHULUAN TRAINING

Experimental modal analysis is quickly developed area of science in last years and becomes as efficient as the finite element method. Experimental approach for solving technical problems is a means to estimate or evaluate modal properties of a mechanical structure. The paper is focused at dynamic properties of machine center, namely at the resonance frequencies and vibration shapes of a simplified tool-work piece system. All this properties are identified by measurements. The machine tool vibration was excited by impulse force and a response of excited vibration was recorded. The measurement points for vibration were selected at the spindle head and the table. We are forced to give answers how to avoid a machine state, given by its rotational speed, when machining process is spoiled by vibration.

Untuk mendukung sistem produksi yang memadai diperlukan tenaga kerja yang handal atau peningkatan keahlian tenaga kerja profesi Dinamika Mesin Perkakas.

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI 

Para praktisi tingkat operator, tingkat penyelia atau perencana bidang dinamika mesin perkakas pada industri rekayasa.

 

TUJUAN TRAINING

Setelah mengikuti training machine tools ini diharapkan para peserta memiliki pemahaman lebih tentang pengetahuan dinamika mesin perkakas.

 

MATERI TRAINING DYNAMIC OF MACHINE TOOLS

1.  General specification of the problems.
2.  Static and dynamic stiffness.

  • Criteria for requirements on stiffness, some basic concepts and notations, deformation of the frame caused by weight forces, deformation of the structure caused by cutting forces, forced vibrations.

3.  Stability against chatter.

  • General features of chatter, the theory of chatter and stability analysis, procedure in the investigation of the stability pf machine tools, example of the analysis, damping and dampers, chatter in grinding, interpretation of the results of the theory.

4.  Static deformation of machine tool structures.

  • Deformation of machine tool structures, basic equation for thin-walled box structures, stresses and deformation of closed box structures subjected to bending and shear, stresses and deformation produced by twisting moment, correction coefficients for stiffness of thin-walled beams weakened by apertures, static stiffness of the column of the horizontal boring and milling machine.

5.  Structural analysis

  • Static analysis, dynamic analysis, application to a plano-milling machine structure

 

INSTRUKTUR TRAINING

SUGENG ISDWIYANUDI, Ir. MT. And Team
He was graduated from politeknik  universitas brawijaya malang for his diploma in mechanical engineering majoring on mechanical maintenance and repairing, from ITS Surabaya for his bachelor in mechanical engineering majoring on production engineering, and from ITB Bandung for his master program in mechanical engineering majoring on production engineering. Now he is as lecturer at mechanical engineering Politeknik Negeri Bandung(before as poltek ITB). Ir. Sugeng Isdwiyanudi, MT. has followed many trainings/courses to improve his competence. He is active instructor who often deliver training for industrial participants in Indonesia, many topics he teachs in training e.g.: pump and piping, Operation and Maintenance Boiler, Operator pressure vessel 1 (cooperated with Depnaker RI), Operation and Maintenance Centrifugal Pump, Effective Shutdown Maintenance, Reliability Centered Maintenance, Advanced Reliability Performance and Hidden Failure Supporting, Management Inventory Control, Alignment, Balancing, and Vibration, Rotating Equipment: Operation and Maintenance, Material technique, Oil Analysis, Maintenance Management (Preventive and Predictive Maintenance),Heavy Equipment Maintenance, Basic Mechanical, Strength of Material, Electro Pneumatic and Hydraulic, Rotating Equipment Alignment and Vibration, Operation and Maintenance Diesel Engine, Operation and Maintenance Boiler, Operation and Maintenance Pump and Compressor, Pressure Vessel and Tank, Preventive and Predictive Maintenance, Total Productive Maintenance (TPM), Heavy Equipment Maintenance Management, Maintenance Equipment Management for Mining, Modern Maintenance and Spare Part Management System, NDT and Quality Assurance, Integrated Material Management, Effective Production Management, Plant Life Management through Reliability Based Inspection, Maintenance Planning, Scheduling, and Coordination, Integrated Maintenance Management and Control, Implementation RCM and RBI in Industries, Total Productive Maintenance (TPM), Reliability Centered Maintenance (RCM), Operator Routine Daily Checklist and Driven Reliability, Measuring, Monitoring, and Analysis of Machinery Vibration, Vibration Prevention and Monitoring System, Advanced Application of CSI 2120/2130 and AMS Suite (RBM) for Condition Monitoring and Troubleshooting, Root Cause Failure Analysis (RCFA), NDT and Quality Assurance, Piping System.  In campus he teachs for some subjects e.g.: industrial metrology, quality control, Instrumentation and measurement, machining technique, production system and quality control, Pneumatics and hydrolics, measurement system, measuremen technique(Metrology of Geometry), mechanics vibration, management of production process, product quality control, statistics application in mechanical engineering, machining process technology, Practice of industrial metrology, pneumatics control system. In campus he has many experiences e.g.: as head of Laboratory industrial Metrology POLBAN, as head of Laboratory Metrology POLBAN, as director SPMU TPSDP POLBAN (ADB Loan 1792-INO), director assistant administration and finance SPMU TPSDP POLBAN (ADB Loan 1792-INO), head of production research group POLBAN, head of department mechanical engineering P4D, department secretary of mechanical department P4D, head of Laboratory Pneumatics and Hydrolics P4D. He invites industrial participants to share and discuss in his training class.

 

VENUE TRAINING

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION 

4 days

 

JADWAL TRAINING 2020

  1. 25 Agust 2020-28 Agust 2020
  2. 14 Sep 2020-17 Sep 2020
  3. 27 Okt 2020-30 Okt 2020
  4. 24 Nop 2020-27 Nop 2020
  5. 14 Des 2020-17 Des 2020

 

INVESTATION PRICE/PERSON 

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains machine tools training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

DYNAMIC OF MACHINE TOOLS

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days