EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

Hotel Ibis, Yogyakarta | 01 – 02 April 2019 | Rp 6.900.000 per peserta
Hotel Ibis, Yogyakarta | 06 – 07 April 2019 (Weekend) | Rp 6.900.000 per peserta
Hotel Ibis, Yogyakarta | 08 – 10 April 2019 | Rp 6.900.000 per peserta
Hotel Ibis, Yogyakarta | 13 – 14 April 2019 (Weekend) | Rp 6.900.000 per peserta
Hotel Ibis, Yogyakarta | 15 – 16 April 2019 | Rp 6.900.000 per peserta

Jadwal Training 2019 Selanjutnya …

 

 

DESKRIPSI TRAINING FLANGE AND JOINT INTEGRITY

In the oil & gas and petrochemical industries, compressors play important role to support all facilities and process that require pressurized gases. Furthermore, air or gas leakage is not acceptable since it affecting on productivity or safety. Hence compressor flange joint integrity should be taken into account.

The reliability of the flanged joint depends critically on competent control of the joint making process, alignment, assembly, and its measurement. It is common to put considerable effort into the design process only for improper assembly to lead to joint failure. Therefore it is important that joint making is undertaken by trained and validated technicians who have an understanding of the procedure and the underlying principles and practice.

To achieve better performance on flange joint, it is important to ensure that all individuals with responsibilities in connection with ensuring the safe control of flange joints are trained and validated as competent to undertake these responsibilities. The program is based around a presentation of best practices and utilizes an intelligent bolting system to explain and demonstrate these principles. This unique method allows key areas of joint making e.g. the need to use bolt lubricant, to be clearly understood.

 

MATERI TRAINING FLANGE AND JOINT INTEGRITY

  1. Introduction to compressor alignment and assembly
  2. Flange Joint Preparation and Assembly
  3. Flange design and standard
  4. Bolt and bolt joint
  5. Bolt and flange strength
  6. Stress Analysis and Tightening Joints
  7. Load control vs torque control
  8. Load and torque measurement
  9. Intelligent bolt control
  10. Protection and Maintenance

 

METODE TRAINING FLANGE AND JOINT INTEGRITY

Presentasi, Diskusi, Studi Kasus

 

 

Jadwal Training 2019

  • Hotel Ibis Malioboro, Yogykarta
  • 1 – 2 April 2019
  • 8 – 10 April 2019
  • 15 – 17 April 2019
  • 22- 24 April 2019
  • 29 – 30 Mei 2019
  • 6 – 8 Mei 2019
  • 13 – 15 Mei 2019
  • 20 – 22 Mei 2019
  • 27 – 29 Mei 2019
  • 10 – 12 Juni 2019
  • 17 – 19 Juni 2019
  • 24 – 26 Juni 2019
  • 1 – 3 Juli 2019
  • 8 – 10 Juli 2019
  • 15 – 17 Juli 2019
  • 22 -24 Juli 2019
  • 29 – 31 Juli 2019
  • 5 – 7 Agustus 2019
  • 13-15 Agustus 2019
  • 19 – 21 Agustus 2019
  • 26 -28 Agustus 2019
  • 02 – 04 September 2019
  • 09-11 September 2019
  • 16 – 18 September 2019
  • 23 – 25 September 2019
  • 30 September – 02 Oktober 2019
  • 07 – 09 Oktober 2019
  • 14 – 16 Oktober 2019
  • 21 – 23 Oktober 2019
  • 28 – 30 Oktober 2019
  • 04 – 06 November 2019
  • 11 – 13 November 2019
  • 18 – 20 November 2019
  • 25 – 27 November 2019
  • 02 -04 Desember 2019
  • 9 – 11 Desember 2019
  • 16 – 18 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

Jadwal Weekend 2019

  • Hotel Ibis Malioboro, Yogykarta
  • 30 – 31 Maret 2019
  • 6 – 7 April 2019
  • 13 – 14 April 2019
  • 20 – 21 April 2019
  • 27 – 28 April 2019
  • 4 – 5 Mei 2019
  • 11 – 12 Mei 2019
  • 18 – 19 Mei 2019
  • 25 – 26 Mei 2019
  • 15 – 16 Juni 2019
  • 22 – 23 Juni 2019
  • 29 – 30 Juni 2019
  • 6 – 7 Juli 2019
  • 13 – 14 Juli 2019
  • 20-21 Juli 2019
  • 27-28 Juli 2019
  • 3 – 4 Agustus 2019
  • 10 – 11 Agustus 2019
  • 17 – 18 Agustus 2019
  • 24 – 25 Agustus 2019
  • 31 Agustus – 01 September 2019
  • 07 – 08 September 2019
  • 14 – 15 September 2019
  • 21 – 22 September 2019
  • 28 – 29 September 2019
  • 05 – 06 Oktober 2019
  • 12 – 13 Oktober 2019
  • 19 – 20 Oktober 2019
  • 26 – 27 Oktober 2019
  • 02 – 03 November 2019
  • 09 – 10 November 2019
  • 16 – 17 November 2019
  • 23 – 24 November 2019
  • 30 November – 01 Desember 2019
  • 07 – 08 Desember 2019
  • 14 – 15 Desember 2019
  • 21 – 22 Desember 2019
  • 28 – 29 Desember 2019

 

INVESTASI & FASILITAS TRAINING FLANGE AND JOINT INTEGRITY

  • 6.900.000 (Non Residential, Belum Termasuk Pajak PPn 10%)
  • VIP training Rp 8.9000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

INSTRUKTUR TRAINING FLANGE AND JOINT INTEGRITY

Ir. Paryana Puspaputra, M.Eng. and Team

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days