ELECTRICAL POWER SYSTEM ANALYSIS

ELECTRICAL POWER SYSTEM ANALYSIS  

Bandung | Senin – Jumat, 30 Juli – 02 Agustus 2012 | Rp 8.500.000/peserta 
Bandung | Senin – Jumat, 10 – 13 September 2012 | Rp 8.500.000/peserta 
Bandung | Senin – Jumat, 24 – 27 September 2012 | Rp 8.500.000/peserta 
Bandung | Senin – Jumat, 08 – 11 Oktober 2012 | Rp 8.500.000/peserta 
Bandung | Senin – Jumat, 29 Oktober – 01 November 2012 | Rp 8.500.000/peserta 
Bandung | Senin – Jumat, 19 – 22 November 2012 | Rp 8.500.000/peserta 
Bandung | Senin – Jumat, 10 – 13 Desember 2012  | Rp 8.500.000/peserta 
Bandung | Senin – Jumat, 26 – 29 Desember 2012 | Rp 8.500.000/peserta 

 

 

 

Deskripsi

A Power System is predominantly in steady state operation or in a state that could with sufficient accuracy be regarded as steady state. In a power system there are always small load changes, switching actions, and other transients occurring so that in a strict mathematical sense most of the variables are varying with the time. However, these variations are most of the time so small that an algebraic, i.e. not time varying model of the power system is justified.

The purpose of this course is to develop a thorough understanding of power system analysis and design as well as the overall capabilities of Power Station. Class room discussion, and problem-solving has been designed to provide the analytical techniques necessary to solve a wide variety of practical problem

Objectives

  • Verifying the adequacy of the power distribution system and it’s components.
  • Recognize coordination related disturbances and outages.
  • Collect the required data to perform a detailed coordination study.
  • Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements.

 

Materi

1. Introduction to Industrial Power Systems

2. Short Circuit Theory and Terminology

  •  Effects of Short Circuits
  •  Fault Current Sources
  •  Machine Reactances
  •  Fault Current Characteristics

3. Electrical Equipment Ratings

  •  Fuses
  •  Circuit Breakers
  •  Motor Starters
  •  Conductors and Bus

4. Balanced Fault Calculations
5. Coordination Fundamentals

  •  Procedures
  •  Data Collection
  •  Scaling Factors

6. Plotting Time/Current Curves

  • Circuit Breakers
  • Fuses
  • Time Delay/Instantaneous Relays
  • Relay Coordination Intervals

7. Equipment Protection and Coordination

  •  NEC and ANSI/IEEE Criteria
  •  Conductors (Low and Medium Voltage)
  •  Transformers
  •  Motors e. Conductors (Low and Medium)

 

Tempat

The Papandayan Hotel / The Jayakarta Suites, Boutique Hotel and spa

PESERTA

This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems.

 

Instruktur

Tugino, ST, MT

Biaya

Biaya pelatihan sebesar Rp 8.500.000/peserta Non residensial. Khusus untuk pengiriman 3 peserta dari perusahaan yang sama, biaya pendaftaran sebesar Rp.8.000.000

Fasilitas

  • Meeting room at Hotel *****
  • Module / Handout
  • Training Kit
  • 2x Coffee Break & Lunch
  • USB
  • Souvenir
  • Certificate
  • Transportation during training
Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days