By January 17, 2020 0 Comments Read More →

FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

Flange merupakan komponen yang digunakan untuk menggabungkan antara dua element pipa dengan valve/ pipa dengan equipment lain

Yogyakarta/ Semarang/ Solo | 27 – 28 Januari 2020 | Rp 6.900.000,-
Bandung/ Jakarta/ Surabaya | 03 – 04 Februari 2020 | Rp 7.900.000,-
Bali/ Batam/ Balikpapan/ Manado | 17 – 18 Februari 2020 | Rp 8.900.000,-
Yogyakarta/ Semarang/ Solo | 02 – 03 Maret 2020 | Rp 6.900.000,-

Jadwal Training 2020 Selanjutnya …

 



DESKRIPSI TRAINING FLANGE AND JOINT INTEGRITY

In the oil & gas and petrochemical industries, compressors play important role to support all facilities and process that require pressurized gases. Furthermore, air or gas leakage is not acceptable since it affecting on productivity or safety. Hence compressor flange joint integrity should be taken into account.

The reliability of the flanged joint depends critically on competent control of the joint making process, alignment, assembly, and its measurement. It is common to put considerable effort into the design process only for improper assembly to lead to joint failure. Therefore it is important that joint making is undertaken by trained and validated technicians who have an understanding of the procedure and the underlying principles and practice.

To achieve better performance on flange joint, it is important to ensure that all individuals with responsibilities in connection with ensuring the safe control of flange joints are trained and validated as competent to undertake these responsibilities. The program is based around a presentation of best practices and utilizes an intelligent bolting system to explain and demonstrate these principles. This unique method allows key areas of joint making e.g. the need to use bolt lubricant, to be clearly understood.

 

MATERI TRAINING FLANGE AND JOINT INTEGRITY

  1. Introduction to compressor alignment and assembly
  2. Flange Joint Preparation and Assembly
  3. Flange design and standard
  4. Bolt and bolt joint
  5. Bolt and flange strength
  6. Stress Analysis and Tightening Joints
  7. Load control vs torque control
  8. Load and torque measurement
  9. Intelligent bolt control
  10. Protection and Maintenance

 

Metode

Presentasi, Diskusi , Studi Kasus

 

Jadwal Training 2020

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis, Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 27 – 28 Januari 2020
  • 3 – 4 Februari 2020
  • 10 – 11 Februari 2020
  • 17 – 18 Februari 2020
  • 26 – 27 Februari 2020
  • 2 – 3 Maret 2020
  • 9 – 10 Maret 2020
  • 16 – 17 Maret 2020
  • 23 – 24 Maret 2020
  • 30 – 31 Maret 2020
  • 6 – 7 April 2020
  • 13 – 14 April 2020
  • 20 – 21 April 2020
  • 27 – 28 April 2020
  • 4 – 5 Mei 2020
  • 11 – 12 Mei 2020
  • 2 – 3 Juni 2020
  • 8 – 9 Juni 2020
  • 15 – 16 Juni 2020
  • 22 – 23 Juni 2020
  • 29 – 30 Juni 2020
  • 6 – 7 Juli 2020
  • 13 – 14 Juli 2020
  • 20 – 21 Juli 2020
  • 27 – 28 Juli 2020
  • 3 – 4 Agustus 2020
  • 10 – 11 Agustus 2020
  • 18 – 19 Agustus 2020
  • 24 – 25 Agustus 2020
  • 31 Agustus 2020 – 1 September 2020
  • 7 – 8 Sepember 2020
  • 14 – 15 September 2020
  • 21 – 22 September 2020
  • 28 – 29 September 2020
  • 5 – 6 Oktober 2020
  • 12 – 13 Oktober 2020
  • 19 – 20 Oktober 2020
  • 26 – 27 Oktober 2020
  • 2 – 3 November 2020
  • 9 – 10 November 2020
  • 16 – 17 November 2020
  • 23 – 24 November 2020
  • 30 November 2020 – 1 Desember 2020
  • 7 – 8 Desember 2020
  • 14 – 15 Desember 2020
  • 21 – 22 Desember 2020
  • 28 – 29 Desember 2020

 

Investasi & Fasilitas

2020 – (Non Residential, Belum Terasuk Pajak PPn 10%)

  • Rp 8.900.000 untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • Rp 7.900.000 untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.900.000 untuk Lokasi Solo, Semarang atau Yogyakarta
  • Jika Perusahaan/ Instansi mengirimkan lebih dari satu peserta pada judul dan tanggal yang sama maka akan di berikan potongan harga pada peserta kedua dan seterusnya masing – masing sebesar Rp 1.000.000 per peserta
  • Quota minimum 2 peserta
  • Quota minimum 3 peserta (Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas: Certificate, Training kits, USB, Lunch, Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/ Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Instruktur

Ir Teguh Pudji Poerwanto MT and Team

 

EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. blankCaptcha
 

cforms contact form by delicious:days

blank

About the Author:

Post a Comment