HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

HYSIS FIELD PROCESS ENGINEERING DESIGN FOR OIL GAS

Bali | 28 – 30 September 2015 | IDR 8.000.000 per participant
Bandung | 28 – 30 September 2015 | IDR 7.500.000 per participant
Yogyakarta | 28 – 30 September 2015 | IDR 7.000.000 per participant
Bali | 12 – 14 Oktober 2015 | IDR 8.000.000 per participant
Bandung | 12 – 14 Oktober 2015 | IDR 7.500.000 per participant
Yogyakarta | 12 – 14 Oktober 2015 | IDR 7.000.000 per participant

Jadwal Training 2015 Selanjutnya …

 

 

OBJECTIVES

1. Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application.
2. Diagnostic of oil and gas reservoir performance under actual drive mechanism and future performance with current handling processes.
3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes.

 

 

 

TRAINING OUTLINES

Introduction

1. The role and responsibility of each member of discipline
2. The different type of project that proses engineering are involved with
3. The complexities of a project
4. A basic understanding of the deliverables each type of project.
5. A basic understanding of the schedule for the different type of project

Process Simulator

1. What is process simulator
   1. What are they
   2. How they are used
   3. How to determine the suitable one
2. Process simulator needs
   1. Component and component behavior
   2. Process flowsheet or description
   3. Operating condition or design specification
   4. Calculate steady state process of heat and mass flow
   5. Model the surface facilities and gas plant
   6. Design or process evaluation
3. Step to modular simulation(Hysis)
   1. Specify component and thermodynamic model
   2. Define process configuration
   3. Specify stream or unit operation connectivity
   4. Operation parameters are ready
   5. Run simulation
   6. Result Checking
   7. Check the simulation result is in line with the real design practice
   8. Verify the result

 

Process Simulation Unit Operation

1. Select Hysis calculation block to represent process equipment
2. Understanding of unit operation in Hysis
3. Understanding single stage separation in Hysis

Process Simulation – Set & Adjust

1. Describe the characteristic of feed forward controller
2. Describe the characteristic of feedback controller
3. Understand how to use SET as feed forward controller
4. Understand how to ADJUST as feedback controller

 

Process Simulation – Crude Stabilizer

1. Understand stream mixing and splitting block
2. Understand pressure change block
3. Select suitable heat transfer block
4. Model a simple crude stabilizer

 

Recycle Stream

1. Select suitable tear stream
2. Installing recycle loop stream

 

INSTRUKTUR

Sigit Budi, ST., MT and team

 

PARTICIPANTS

Senior operators, Junior operators, Junior production engineers and supervisors, Well service engineers and supervisors, Materials, Logistics and warehouse personnel, Work over and Well services engineers and supervisors

 

METODE

Lecturing, presentasi, diskusi interaktif, sharing, studi kasus

 

TIME & VENUE

• 28-30 September 2015
• 12-14 Oktober 2015
• 20-22 Oktober 2015
• 26-28 Oktober 2015
• 11-13 November 2015
• 16-18 November 2015
• 25-27 November 2015
• 21-23 Desember 2015
• Hotel Novotel | Yogyakarta

TRAINING FEE

• IDR 7.000.000 per participant (Non-Residential)
• Minimal participants : 2 persons (Yogyakarta)
• Yogyakarta : Ibis Styles Dagen, Ibis Malioboro, Horison Ultima-Riss, Harper Mangkubumi, 101 Hotel, Grand Tjokro, Novotel, Grand Aston, Phoenix Hotel | Kuota Min. Peserta: 2 orang
• Bali : Ibis Styles Kuta, Ibis Dewi Sri, Ibis Bali Kuta, Ibis Circle Kuta, Harris Hotel | IDR. 8.000.000 Per Peserta (Non-Residential) | Kuota Min. Peserta: 5 orang
• Bandung : De Batara, Amaris, Golden Flower Hotel | IDR. 7.500.000 Per Peserta (Non-Residential) | Kuota Min. Peserta: 5 orang

 

FASILITAS

• Training Modul
• Stationeries
• Sertifikat
• Backpack
• Exclusive Polo shirt
• Flashdisk berisi materi training
• Training photo
• 2x coffee break dan makan siang
• Transportation Service dari Bandara ke hotel / training venue (M untuk 2 orang peserta dari perusahaan yang sama).

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days