LUBRICATION ENGINEERING

LUBRICATION ENGINEERING

Bali | 24 – 26 Juni 2015 | IDR 8.000.000 per participant
Bandung | 24 – 26 Juni 2015 | IDR 7.000.000 per participant
Yogyakarta | 24 – 26 Juni 2015 | IDR 6.500.000 per participant
Bali | 08 – 10 Juli 2015 | IDR 8.000.000 per participant
Bandung | 08 – 10 Juli 2015 | IDR 7.000.000 per participant
Yogyakarta | 08 – 10 Juli 2015 | IDR 6.500.000 per participant

Jadwal Training 2015 Selanjutnya …

 

 

DESCRIPTION LUBRICATION ENGINEERING

The Lubrication Fundamentals workshop is a comprehensive, highly practical and interactive two-day course. With a bewildering selection of thousands of lubricant types, base stocks, additive packages and viscosity grades to choose, how do you know which one is right for your machine. After attending this course and interacting with your fellow students and instructor, you will have the tools to and knowledge to understand the key properties of lubricants and how to select the right one for your applications. Modern lubrication programs have dramatically changed from the old methods that have been passed down through the generations. If you aren’t using the right lubricant at the right time, in the right place, in the right quantity you could in fact be doing more harm than good and losing the opportunity to save your firm thousands of dollars with an effective lubrication program.

OBJECTIVES LUBRICATION ENGINEERING

At the end of the training you will have developed the skills and ability to recognise and solve lubricant problems in a structured and confident manner.

 

TRAINING OUTLINES LUBRICATION ENGINEERING

1.Introduction & Background

Discuss briefly the composition of lubricants, crude oil derived lubricants and synthetic lubricants.

  1. Tribology
  • The cause of friction, heat, the result of friction, what causes wear
  • The types of lubrication:
    •    – fluid and hydro-dynamic lubrication
    •    – boundary lubrication
  • The characteristics of the lubricant under different operating conditions e.g. material surfaces, temperature conditions, load and viscosity of the lubricant
  • Different types of lubricants for different applications
  1. The Properties Of Lubricants
  • Viscosity
  • Flashpoint and Volatility
  • Oxidation and thermal stability
  • Demulsibility
  • Foaming and gas solubility
  • Corrosion prevention
  • Compatibility
  1. Lubricating Oil Additives
  • Oxidation inhibitors
  • Rust and corrosion inhibitor
  • Pour point depressants
  • Viscosity inhibitor (VI) improvers
  • Anti-wear additives
  • Extreme pressure (EP) additives
  • Anti-foam additives
  • Detergents and dispersants additives
  • Demulsifiers and Emulsifiers
  • Tackiness additives
  1. Types Of Lubricants Greases And Grease Lubrication
  • Grease characteristics
  • Lubrication grease classification
  • Choice of grease
  • Grease types and performance
  • Grease application and trouble-shooting
  • Roller bearing lubrication
  1. Internal Combustion Lubricants
  • Petrol and diesel engines
  • The choice of lubricant by engine type
  • Lubricant classification
  • Plain bearing lubrication
  1. Lubrication
  • Viscosity classifications
  • Automatic transmission fluid
  1. Hydraulic Systems And Fluids
  • Hydraulic systems
  • Viscosity of the lubricant
  • Chemical stability
  • Fire resistance
  • Anti-wear
  • Anti-rust
  • Anti-foam
  1. Miscellaneous Lubrication
  • Steam Turbine Pumps and Motor
    • Lubrication
  • Air Compressor Lubrication
  1. Lubrication Systems Filtration
  • Contamination fundamentals
  • Contamination generation
  • Cleanliness control
  • Filter fundamentals
  • Filter performance and testing
  • Flashing
  1. Conditions Assessment Of Rotating Machinery
  • Monitoring techniques
  • Vibration analysis
  • Oil analysis

12.Tribology Root Causes Of Failures

  • Fluid contamination control
  • Leakage stability
  • Fluid chemical stability
  • Temperature stability
  • Wear stability
  1. Storage
  • Safety Issues
  • Shelf Life
  • Contamination Potential

 

INSTRUCTOR LUBRICATION ENGINEERING

Dr. Ir. Rini Dharmastiti, M.Sc. and team

 

TIME & VENUE LUBRICATION ENGINEERING

  • 24-26 Juni 2015
  • 8-10 Juli 2015
  • 14-16 Juli 2015
  • 27-29 Juli 2015
  • 5-7 Agustus 2015
  • 18-20 Agustus 2015
  • 26-28 Agustus 2015
  • 2-4 September 2015
  • 9-11 September 2015
  • 28-30 September 2015
  • 12-14 Oktober 2015
  • 20-22 Oktober 2015
  • 26-28 Oktober 2015
  • 11-13 November 2015
  • 16-18 November 2015
  • 25-27 November 2015
  • 21-23 Desember 2015
  • Hotel Horison Ultima-Riss | Yogyakarta

 

TRAINING FEE LUBRICATION ENGINEERING

  • IDR 6.500.000 per participant (Non-Residential)
  • Minimal participants : 2 persons (Yogyakarta)
  • Yogyakarta : Ibis Styles Dagen, Ibis Malioboro, Horison Ultima-Riss, Harper Mangkubumi, 101 Hotel, Grand Tjokro, Novotel, Grand Aston, Phoenix Hotel | Kuota Min. Peserta: 2 orang
  • Bali : Ibis Styles Kuta, Ibis Dewi Sri, Ibis Bali Kuta, Ibis Circle Kuta, Harris Hotel | IDR. 8.000.000 Per Peserta (Non-Residential) | Kuota Min. Peserta: 5 orang
  • Bandung : De Batara, Amaris, Golden Flower Hotel | IDR. 7.000.000 Per Peserta (Non-Residential) | Kuota Min. Peserta: 5 orang

FACILITIES

  • Training Modul
  • Stationeries
  • Certificate
  • Backpack
  • Exclusive Polo shirt
  • Flashdisk containing materials
  • Training photo
  • 2x coffee break and lunch
  • Transportation Service from airport to hotel / training venue (at least for 2 participants from the same company).

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days