PIPELINE INTEGRITY MANAGEMENT SYSTEM OF CORROSION CONTROL & CATHODIC PROTECTION

PIPELINE INTEGRITY MANAGEMENT SYSTEM OF CORROSION CONTROL & CATHODIC PROTECTION

The Luxton Hotel, Bandung | 03 – 05 April 2013 | IDR 7.699.000,-/participant
The Luxton Hotel, Bandung | 02 – 04  July 2013 | IDR 7.699.000,-/participant
The Luxton Hotel, Bandung | 01 – 03 October 2013 | IDR 7.699.000,-/participant


Abstract

After completion of this practical course, participant will better understand and get improvement on how corrosion occurs and why corrosion attacks oil & gas surface facilities equipment and pipeline, how to prevent, control and minimize oil & gas corrosion damage, and how to monitor and evaluate the results of corrosion control measures and pigging. Participant will get improvement corrosion coupon, scale coupon, ER corrosion probes, LPR corrosion probes and corrosion probe data readings, and the application of on-line corrosion monitoring techniques in pipeline integrity management system.

Course Content:

In this specially designed practical course participant will learn from and discuss with professional instructor the following subjects:

  • Pipeline Integrity Management System
  • Ten Steps to Pipeline Integrity Management
  • Hazard Assessment and Risk Based Inspection
  • Corrosion Monitoring and Inspection
  • Failure Analysis, Incident Investigation & Reporting
  • Pipeline Corrosion Inhibition
  • Pipeline Inspection, Maintenance and Pigging Operation
  • Potential Operational Problems in Oil &Gas Pipeline System
  • Inspection Methods for Potential Failures and Wall Thickness Reduction
  • Pipeline Cleaning and Pigging Operations
  • Pipeline External Maintenance with Cathodic Protection
  • Practical Guidelines for Oil & Gas Pipeline Service Contracts Strategy
  • Pipeline Integrity Monitoring Techniques
  • Pipeline Coating Defects and External Failures Monitoring
  • Pipe-to-soil Potential Measurement
  • Transformer/Rectifier Voltage-Current Monitoring and Regulation
  • Corrosion, Pitting, Erosion, Scale, MIC and SRB Monitoring
  • Weight-loss Corrosion Rate Measurement
  • Practical Guidelines for the Selection and Use of Paints, Coatings and Wrapping Materials
  • Generic Types and Characteristics of Coatings and Wrapping Materials
  • Guidelines for the Selection of Coating Types and Topcoat Materials
  • Marine Growth Control and Lining for Underwater and Splash Zone
  • Paints and Coatings Application and Inspection Techniques
  • Effective Dry Film Thickness and the Economics of Paint & Coating Use
  • Cathodic Protection with Sacrificial Anode (SACP)
  • Resistivity, Coating Defect and Potential Measurement Techniques
  • Half-Cells and Materials Required for Measurement and Protection
  • Guidelines for Determination of Protection Current Requirement
  • Selection of Suitable SACP Anode Type and Anode Material
  • Inspection, Monitoring, Adjustment and Evaluation of SACP
  • Cathodic Protection with Impressed Current (ICCP)
  • The Use of Insulating Flanges and Current Jumper
  • Design Calculation and Layout for Application of Impressed Current
  • Guidelines for the Selection of ICCP Anode Type and Anode Material
  • Transformer/Rectifier and the ICCP Electrical Component
  • ICCP Failure or Damage because of Foreign Pipeline Crossing

Participant

Technical and non-technical personnel of Oil and Gas Company who involves in or concern with daily oil & gas surface equipment and pipeline operation and maintenance against internal corrosion, those who responsible of the integrity and continuity of oil and gas transportation through pipeline system and those who responsible to maintain pigging and chemical injection into the pipeline and monitoring corrosion and scale problems with Corrosion Coupons, ER probes and LPR probes

Instructor

Ir. In Jumanda Kasdadi K., MT. And Tim

Expert in engineering , processing, instrumentation and control, HSE, safety, Piping and Corrosion Control, Waste and Water Treatment.


TEMPAT DAN WAKTU

Waktu           : 08.30-16.30 WIB
Tempat         : The Luxton Hotel bandung
Tanggal        :

  • 03 – 05 April 2013 (Bacth II)
  • 02 – 04  July 2013 (Bacth III)
  • 01 – 03 October 2013 (Batch IV)

INVESTASI

  • IDR 7.699.000,-/participant non residensial.
  • For send 3 participant discount 10 %.

 FASILITAS

  • Meeting Room Hotel ****
  • Training KIT
  • Souvenir
  • Sertifikat
  • 2 X Coffe Break + Lunch

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days