Process Safety Management

Process Safety Management

Bandung | 20 – 22 Mei 2019 | Rp. 6.500.000 Per Peserta
Bandung | 17 – 19 Juni 2019 | Rp. 6.500.000 Per Peserta
Bandung | 31 Juli – 02 Agustus 2019 | Rp. 6.500.000 Per Peserta
Bandung | 16 – 18 Agustus 2019 | Rp. 6.500.000 Per Peserta

Jadwal Training 2019 Selanjutnya …

 

TRAINING INTRODUCTION PROCESS SAFETY MANAGEMENT

This course provides an in-depth study of each PSM element. cthe implementation phase. This course also covers how to expand your PSM program to include the RBPS (risk-based process safety) elements as proposed by the CCPS (Center for Chemical Process Safety), a division of AIChE (American Institute of Chemical Engineers)

Case Studies – Case studies and exercises are used throughout the course to illustrate interpretations of the requirements and demonstrate ways to develop an effective PSM program, including several video based case studies, including several video-based case studies.



TRAINING OBJECTIVE PROCESS SAFETY MANAGEMENT

In this interactive training, participants will have the opportunity to:

  • To interpret the performance-based requirements of the U.S. OSHA PSM and EPA risk management standards, as well as learn about related industry standards
  • The elements of process safety that are missing from typical PSM systems, including Human Factors elements (communication, human system interface, work environment, staffing, and fitness for duty), Facility Siting element, Project Risk Management, Senior Leadership & Accountability.  The Risk-Based Process Safety (RBPS) guide (2007) from CCPS/AIChE is reviewed so you can understand how to close critical gaps
  • Multiple options for implementing an effective need-specific program
  • Specific guidelines for developing cost effective written programs tailored for each PSM element, whether for a single facility or a corporation
  • How to avoid costly implementation mistakes
  • Jargon for communicating PSM requirements to others throughout the organization
  • For each element
    • How to develop written programs to meet PSM requirements
    • How to incorporate and integrate the PSM element requirements into other corporate programs (other corporate management systems)
    • Key performance indicators
    • How to evaluate program compliance throughout implementation
    • How to begin implementation at your company
    • Additional training necessary for implementation of specific elements
  • The course uses actual and generic case studies
    • To illustrate interpretations of PSM requirements
    • To demonstrate developing an effective PSM program that can be adapted for your facility

 

WHO SHOULD ATTEND THIS TRAINING ?

  1. Managers – Operations, Safety, and Executive
  2. Engineers – Process, Safety, and Mechanical
  3. PSM Implementation Team Members – Anyone involved with implementation, including operators and maintenance personnel
  4. Compliance Auditors
  5. Environmental Management and Technicians

 

TRAINING MATERIAL OUTLINE PROCESS SAFETY MANAGEMENT:

Day 1 (8:00 a.m. – 5:00 p.m.)

  1. Introduction to PSM and its origins and goals
  2. Overview of PSM standards and regulations world-wide, definitions, compliance interpretations
  3. Elements of PSM:
    • ­Human error basics
    • ­Elements missing from most PSM systems, including specific human factor aspects, management  commitment & accountability, and project risk management
    • ­Employee participation
    • ­Trade secrets
    • ­Process safety information
    • ­Operating procedures

Day 2 (8:00 a.m. to 5:00 p.m.)

  1. Elements of PSM (continued):
    • ­Hot work permit/safe work
    • ­Training
    • ­Contractors
    • ­Process hazard analysis
    • ­Management of change
    • ­Mechanical integrity
    • ­Pre-startup safety review

Day 3 (8:00 a.m. to 3:00 p.m.)

  1. Elements of PSM (continued):
    • ­Emergency planning and response
    • ­Incident investigation
    • ­Compliance auditing
  2. Key Performance Indicators, Leading Indicators, and Tracking
  3. Summary of roles and responsibilities
  4. Developing PSM programs, implementation planning
  5. Course examination (optional)

 

INSTRUCTOR PROCESS SAFETY MANAGEMENT

Bambang Pamudji, BSc, SE And Team

He has more than 29 years working experiences in Petrochemical industry are. He had  provided HSE management program development and implementation as well as risk assessment leadership ,HSE Management System and Environmental Management System Internal Auditor on PT. Pupuk Sriwidjaja Urea Fertilizer Company Palembang. He had led “step change” HSE improvement in all assignments. On The Last past 5 years He has done as  Advisory service  in HSE Management System,HSE Training program  Development and trainer, HSE Auditor, HSE Coordinator in a variety of areas ranging from oil/gas production, pipeline operations, and chemical plants.

He appeared as a speaker in HSE Indonesian / Asian Pacific Region Seminars and Conferences.

He also had attended many special training and courses during his career, such as HSE Specialist in Chemical Safety, Fundamental of Industrial Hygiene, OHS Management System , OHS Management System Auditor, Hazop leaders and Hazards assessment , The measurement of the occupational environment, Environmental Impact Issues Analysis(AMDAL A),  Workplace Control, Engine noise and vibration control and many more.

 

VENUE PROCESS SAFETY MANAGEMENT

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION PROCESS SAFETY MANAGEMENT

3 days

 

TRAINING TIME

  • 20 Mei 2019-22 Mei 2019
  • 17 Jun 2019-19 Jun 2019
  • 31 Jul 2019-02 Agust 2019
  • 19 Agust 2019-21 Agust 2019
  • 16 Sep 2019-18 Sep 2019
  • 30 Okt 2019-01 Nop 2019
  • 18 Nop 2019-20 Nop 2019
  • 16 Des 2019-18 Des 2019

 

INVESTMENT PRICE/PERSON :

  • 6.500.000/person (full fare) or
  • 6.250.000/person (early bird, payment 1 week before training) or
  • 5.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS :

  •     Training Module
  •     Flashdisk contain training material
  •     Certificate
  •     NoteBook and Ballpoint
  •     T-Shirt
  •     Backpack
  •     Training Foto
  •     Training room with full ac facilities and multimedia
  •     Lunch and twice coffee break everyday of training
  •     Qualified Instructor
  •     Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days