ENVIRONMENTALLY SAFE DRILLING PRACTICE IN THE OIL GAS & GEOTHERMAL INDUSTRY: Safe Handling-Treatment-Disposal

ENVIRONMENTALLY SAFE DRILLING PRACTICE IN THE OIL GAS & GEOTHERMAL INDUSTRY

Safe Handling-Treatment-Disposal

Bandung | May 4-7, 2010 | USD 917,-/ Person


Background

With today’s growing awareness of social responsibility and public interest, environmental concerns are receiving the highest priority in government regulations. The future of our environment – and the industry – depends on meeting the challenge of maintaining a balance between acceptable environmental practices and economically efficient operating procedures.

These growing concerns have imposed a burden on the oil and gas drilling industry to implement program and technique to not only minimize the potential impact that oil and gas operations can have on the environment but also remediate those impacts, whether they occurred through accident or negligence.

The mandate to the oil and gas industry of implementing environmentally safe drilling technique has proven to be not only a financial challenge but also an administrative challenge.

Regulations governing the oil industry with regard to the environment continue to change, yet many firm that recognize they no longer can conduct their operations as they did in “the good old days” have had to employ full-time environmental professional to ensure that all operations conducted in the field are in compliance with the changing local and state regulations. This increase scrutiny also has prompted drilling contractor to think of ways to minimize the impact their operations have on the environment rather than just ways of how to remediate the impact ones it occurs.

This training is intended to introduce technique that will assist oil and gas professional in minimizing the impact that drilling operations have on the environment.

Much of what is contained herein reflects the trainer’s industry experience, with an emphasis on-shore and wetlands drilling operations. At the same time, it must be said that the preferred practices and recommendation outline in this program can serve as useful guidelines for operator and drilling contractor elsewhere in the world, notably in environmentally sensitive areas of developing countries that have little historical regulatory precedents.

This 4 day course covers all aspects of drilling and deals with both theory and application. It is particularly valuable for their career in drilling operation.

Emphasis is on the system and technique that are commonly used in the drilling industry, regulations and environment protection basics, from site assessment to reclamation. The curriculum is designed to provide the information needed as a drilling waste professional, regardless of skill level.

This course is a must attend for all individuals with overall environmental compliance responsibilities. This course provides the tools needed for the job.


Course Objective

Upon completion of the training, the participants will have improvement in:

  • Knowledge on hazardous and non-hazardous drilling wastes: generation, characteristics and impacts on occupational safety, health and environment.
  • Understanding environmental management principles including waste minimization or cleaner production
  • Practical knowledge on the proper identification, segregation, containerization, temporary storage
  • Transportation, treatment and safe disposal of hazardous and non-hazardous wastes of drilling activities
  • Translating the principles and knowledge on environmental management into strategic problems solving


Who Should Attend?

Managers, supervisors, environmental coordinators and/or engineer, health and safety coordinators, and consultants all benefit from this training. Many of our participants attend because they have responsibility to back up the designated environmental coordinator at the facility.

Superintendent and Supervisor of drilling operational function, Waste Management Team, Transportation and Logistics Division as well as Health, Safety & Environmental senior staff.

The recommended participant may include key personnel whose activities are most likely to impact the environment and or producing drilling wastes.


Course Outline

1. Drilling and the environment

  • a. basic concepts
  • b. environmental regulations: existing and trends
  • c. ISO-14001 EMS requirements vs environmental impact.

2. Preventing Spills

  • a. spill prevention – control and countermeasure plan
  • b. onshore facility operations
  • c. preventive maintenance

3. Site Assessments

  • a. phase I Environmental Site Assessment

4. Sampling

  • a. sampling techniques
  • b. sample analysis
  • c. data interpretation

5. Well site Determination

  • a. Wetlands
  • b. Wetlands permitting
  • c. EIS (Environmental Impact Statement)s and EA (Environmental Assessment)s

6. Mitigation

7. Drilling Techniques

  • a. New approaches
  • b. Operating concerns

8. Drilling Wastes

  • a. Non-hazardous oil field waste
  • b. Drilling fluids
  • c. Drill cuttings
  • d. Wash down fluids
  • e. Sanitary waste
  • f. Storm water runoff
  • g. Hazardous wastes
  • h. NORM (naturally occurring radioactive materials)

9. Wastes Handling and Minimization

  • a. Reserve pits
  • b. Land farming
  • c. Trenching and burying
  • d. Discharge
  • e. Reuse
  • f. Subsurface injection
  • g. Slurrification
  • h. Haul-off
  • i. Closed-loop system
  • j. Overview

10. Remediation

11. Drilling and the future

  • a. Balancing act
  • b. Industry’s challenge

12. Case study – lesson learn

13. Audit and Inspection


ABOUT INSTRUCTOR:

WAHYU PRIATNA AFFANDI is experienced Instructor, who succeeds in combining the experience of practitioner with ability adequate academic. He has experience more than 25 years as a practitioner in Petroleum Industries. After he graduated from ITB, he started his career as a Production Operation Engineer in HUFFCO-Indonesia and then he joined VICO Indonesia for more than 19 years (as a Reservoir Engineer, Tanker Coordinator until as a Senior Environmental Coordinator for Kalimantan Operations). He also spent his 3 years career in LASMO Indonesia as Environmental Specialist and ended his career in Oil & Gas Company as an advisor in ISO-14001 Audit & Certification Developing Environmental Program, Risk Assessment, Training, Waste Management and Community Development, in ENI Indonesia.

 

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.


Documentation & Dress Code

  • Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.
  • Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
  • Casual clothing is recommended. The training atmosphere is informal.


Facilities

  • Quality training material (hardcopy and softcopy)
  • Quality training kits included T-shirt or jacket, cap, ect.
  • Interactive presentation with discussion
  • Lunch per day
  • Morning and afternoon coffee / tea breaks for along the training
  • Certificate of Completion
  • Exclusive flash disk.


**) Optional


Tuition Fee & Registration  Deadline

  • USD 917,-/ Person,
  • Registration deadline a weeks before training held.


Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)


Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

About the Author:

Post a Comment