CENTRIFUGAL COMPRESSOR: PERFORMANCE & EVALUATION

Training ini memberikan strategi perawatan yang ekonomis namun menjamin ketersediaan kompresor

Yogyakarta/ Semarang/ Solo | 27 – 28 Januari 2020 | Rp 6.900.000,-
Bandung/ Jakarta/ Surabaya | 03 – 04 Februari 2020 | Rp 7.900.000,-
Bali/ Batam/ Balikpapan/ Manado | 17 – 18 Februari 2020 | Rp 8.900.000,-
Yogyakarta/ Semarang/ Solo | 02 – 03 Maret 2020 | Rp 6.900.000,-

Jadwal Training 2020 Selanjutnya …

 

 

DESKRIPSI TRAINING COMPRESSOR 

 The degree to which compressors are maintained today ranges from “wait until destruction” to a “complete” but extravagant program. This seminar presents maintenance strategies that are economical and yet assure required compressor availability. Participants review the fundamentals of compressors and the techniques for maintaining them. Participants examine proper methods of parts repair techniques as well as diagnostic tests for identifying and determining problems. Participants will study in depth preventive maintenance programs including the purpose of such programs and their planning and implementation.

 

MATERI TRAINING COMPRESSOR

  1. Compressor Types
    • Centrifugal
    • Helical screw
    • Reciprocating
    • Application ranges
    • Application ranges
    • Short cut selection methods
  2. Turbo compressor Maintenance
    • Overview of alignment methods
    • Predictive versus preventive strategies
    • Run-length extension surveys
    • Machinery turnaround planning
  3. Reciprocating Compressor Operation
    • Lubrication systems
    • Valves, valve problems and rebuilding
    • Packing and packing problems
    • Controls and cooling systems
  4. Saving Compressor Air Cost While Increasing Efficiency
    • The impact of artificial demand
    • Today’s compressor control
    • Realistic leak management
    • Stabilizing a compressed air system
    • Compressed air dryers
  5. Reciprocating Compressor Preventive Maintenance
    • Types of maintenance programs
    • Purpose of preventive maintenance
    • Inspection and inspection forms
    • Vendor and contractor requirements
    • Planning and implementation
  6. Overhaul and Repair of Reciprocating Compressors
    • Methods of repair and overhaul
    • Alignment and piston rod run out
    • Foundation problems and repair
    • Component repair and rebuilding
  7. Troubleshooting Compressor Problems
    • Basic approaches to compressor troubleshooting
    • Typical problems and solutions
    • Diagnostic test
    • Examples from recent failure incidents

 

Peserta

  • Plant and maintenance engineers
  • Maintenance managers and supervisors and compressor specialists

 

Metode

Presentasi, Diskusi , Studi Kasus

 

Jadwal Training 2020

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis, Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 27 – 28 Januari 2020
  • 3 – 4 Februari 2020
  • 10 – 11 Februari 2020
  • 17 – 18 Februari 2020
  • 26 – 27 Februari 2020
  • 2 – 3 Maret 2020
  • 9 – 10 Maret 2020
  • 16 – 17 Maret 2020
  • 23 – 24 Maret 2020
  • 30 – 31 Maret 2020
  • 6 – 7 April 2020
  • 13 – 14 April 2020
  • 20 – 21 April 2020
  • 27 – 28 April 2020
  • 4 – 5 Mei 2020
  • 11 – 12 Mei 2020
  • 2 – 3 Juni 2020
  • 8 – 9 Juni 2020
  • 15 – 16 Juni 2020
  • 22 – 23 Juni 2020
  • 29 – 30 Juni 2020
  • 6 – 7 Juli 2020
  • 13 – 14 Juli 2020
  • 20 – 21 Juli 2020
  • 27 – 28 Juli 2020
  • 3 – 4 Agustus 2020
  • 10 – 11 Agustus 2020
  • 18 – 19 Agustus 2020
  • 24 – 25 Agustus 2020
  • 31 Agustus 2020 – 1 September 2020
  • 7 – 8 Sepember 2020
  • 14 – 15 September 2020
  • 21 – 22 September 2020
  • 28 – 29 September 2020
  • 5 – 6 Oktober 2020
  • 12 – 13 Oktober 2020
  • 19 – 20 Oktober 2020
  • 26 – 27 Oktober 2020
  • 2 – 3 November 2020
  • 9 – 10 November 2020
  • 16 – 17 November 2020
  • 23 – 24 November 2020
  • 30 November 2020 – 1 Desember 2020
  • 7 – 8 Desember 2020
  • 14 – 15 Desember 2020
  • 21 – 22 Desember 2020
  • 28 – 29 Desember 2020

 

Investasi & Fasilitas

2020 – (Non Residential, Belum Terasuk Pajak PPn 10%)

  • Rp 8.900.000 untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • Rp 7.900.000 untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.900.000 untuk Lokasi Solo, Semarang atau Yogyakarta
  • Jika Perusahaan/ Instansi mengirimkan lebih dari satu peserta pada judul dan tanggal yang sama maka akan di berikan potongan harga pada peserta kedua dan seterusnya masing – masing sebesar Rp 1.000.000 per peserta
  • Quota minimum 2 peserta
  • Quota minimum 3 peserta (Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas: Certificate, Training kits, USB, Lunch, Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/ Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Instruktur

Ir Teguh Pudji Poerwanto MT and Team

PERFORMANCE & EVALUATION OF CENTRIFUGAL COMPRESSOR: CASE STUDY AND TROUBLESHOOTING

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days