By January 16, 2020 0 Comments Read More →

Compressor Operation, Maintenance & Troubleshooting

Compressor: Operation, Maintenance & Troubleshooting

Yogyakarta/ Semarang/ Solo | 27 – 28 Januari 2020 | Rp 6.900.000,-
Bandung/ Jakarta/ Surabaya | 03 – 04 Februari 2020 | Rp 7.900.000,-
Bali/ Batam/ Balikpapan/ Manado | 17 – 18 Februari 2020 | Rp 8.900.000,-
Yogyakarta/ Semarang/ Solo | 02 – 03 Maret 2020 | Rp 6.900.000,-

Jadwal Training 2020 Selanjutnya …

 

 

DESKRIPSI TRAINING CENTRIFUGAL COMPRESSORS

This training programme covers a study of gas compression and expansion laws applied to industrial processes. this covers theory, practice and troubleshooting applications of compressor usually encountered in plants, and their related aspects.

The objective of the programme is to provide a practical and experienced based approach to the problems posed by compressor and turbines and the means to solve them. With the knowledge gained in this programme, the participants shall be able to analyze the operating parameters and strive to improve the performance of these rotating machines.

 

MATERI TRAINING CENTRIFURGAL COMPRESSOR

Theory of compression

  • Ideal gas equation and practical application
  • Isentropic, polytropic, isothermal compression
  • Calculations mass and volume capacity
  • Practical compression laws
  • Discharge temperature
  • Power for compression
  • Characteristic curves

Axial and centrifugal compressor

  • Parts of compressor
  • Seals / sealing for compressor
  • Characteristic curves: invariant representations
  • Surge and stonewall; range of working efficiency
  • Capacity control methods
  • Start-up, vibration survey

Technology

  • Casings, diaphragms, stator, blades
  • Rotor, journal and thrust bearings, internal and shaft seals, coupling
  • Balance and critical speeds
  • Lubrication and seal systems
  • Typical mechanical incidents
  • Case studies

 

PESERTA TRAINING CENTRIFUGAL COMPRESSORS

Participants for the programme are those involved in operation,maintenance, process design, project and inspection engineers who are involved in compressor and steam turbine units.

 

METODE TRAINING CENTRIFUGAL COMPRESSORS

Presentasi, Diskusi , Studi Kasus

 

Jadwal Training 2020

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis, Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 27 – 28 Januari 2020
  • 3 – 4 Februari 2020
  • 10 – 11 Februari 2020
  • 17 – 18 Februari 2020
  • 26 – 27 Februari 2020
  • 2 – 3 Maret 2020
  • 9 – 10 Maret 2020
  • 16 – 17 Maret 2020
  • 23 – 24 Maret 2020
  • 30 – 31 Maret 2020
  • 6 – 7 April 2020
  • 13 – 14 April 2020
  • 20 – 21 April 2020
  • 27 – 28 April 2020
  • 4 – 5 Mei 2020
  • 11 – 12 Mei 2020
  • 2 – 3 Juni 2020
  • 8 – 9 Juni 2020
  • 15 – 16 Juni 2020
  • 22 – 23 Juni 2020
  • 29 – 30 Juni 2020
  • 6 – 7 Juli 2020
  • 13 – 14 Juli 2020
  • 20 – 21 Juli 2020
  • 27 – 28 Juli 2020
  • 3 – 4 Agustus 2020
  • 10 – 11 Agustus 2020
  • 18 – 19 Agustus 2020
  • 24 – 25 Agustus 2020
  • 31 Agustus 2020 – 1 September 2020
  • 7 – 8 Sepember 2020
  • 14 – 15 September 2020
  • 21 – 22 September 2020
  • 28 – 29 September 2020
  • 5 – 6 Oktober 2020
  • 12 – 13 Oktober 2020
  • 19 – 20 Oktober 2020
  • 26 – 27 Oktober 2020
  • 2 – 3 November 2020
  • 9 – 10 November 2020
  • 16 – 17 November 2020
  • 23 – 24 November 2020
  • 30 November 2020 – 1 Desember 2020
  • 7 – 8 Desember 2020
  • 14 – 15 Desember 2020
  • 21 – 22 Desember 2020
  • 28 – 29 Desember 2020

 

Investasi & Fasilitas

2020 – (Non Residential, Belum Terasuk Pajak PPn 10%)

  • Rp 8.900.000 untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • Rp 7.900.000 untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.900.000 untuk Lokasi Solo, Semarang atau Yogyakarta
  • Jika Perusahaan/ Instansi mengirimkan lebih dari satu peserta pada judul dan tanggal yang sama maka akan di berikan potongan harga pada peserta kedua dan seterusnya masing – masing sebesar Rp 1.000.000 per peserta
  • Quota minimum 2 peserta
  • Quota minimum 3 peserta (Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas: Certificate, Training kits, USB, Lunch, Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/ Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Instruktur

Ir Teguh Pudji Poerwanto MT and Team

OPERATION AND MAINTENANCE FOR CENTRIFUGAL COMPRESSORS: CASE STUDY AND TROUBLESHOOTING

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. blankCaptcha
 

cforms contact form by delicious:days

blank

About the Author:

Post a Comment