ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP – Pasti Jalan

0
63 views

Bagaimana melakukan analisa sistem electrical power menggunakan aplikasi Etap? Temukan jawabannya dalam training ini

Yogyakarta/ Semarang/ Solo | 16 – 17 September 2019 | Rp. 6.400.000,-
Bali/ Batam/ Balikpapan/ Manado/ Lombok | 23 – 24 September 2019 | Rp. 8.400.000,-
Hotel Ibis Senen, Jakarta | 30 September – 01 Oktober 2019 | Rp. 7.400.000,- PASTI JALAN

Jadwal Training 2019 Selanjutnya …

 

 

DESKRIPSI TRAINING ETAP FOR ELECTRICAL POWER SYSTEM ANALYSIS

Pelatihan ini bertujuan meningkatkan pengetahuan dan wawasan mengenai analisa sistem tenaga. Untuk mensimulasikan hasil analisa digunakan software Aplikasi ETAP. Pelatihan ditekankan pada analisa pada jaringan tenaga listrik Tegangan menengah hingga tegangan rendah yang meliputi Studi Aliran daya, Analisa Hubung singkat, Analisa Transien dan Harmonisa.

 

TUJUAN TRAINING ETAP FOR ELECTRICAL POWER SYSTEM ANALYSIS

Setelah mengikuti training peserta diharapkan dapat:

  • Meningkatkan pengetahuan dan wawasan mengenai kondisi operasi Sistem Tenaga
  • Melakukan analisa Aliran Daya menggunakan ETAP
  • Melakukan Analisa Hubung Singkat menggunakan ETAP
  • Melakukan Analisa Motor Starting menggunakan ETAP
  • Melakukan Analisa Transient menggunakan ETAP
  • Melakukan Studi Harmonisa dan menentukan ukuran Filter

 

MATERI TRAINING ETAP FOR ELECTRICAL POWER SYSTEM ANALYSIS

  1. Electric power grid representation and characteristic. (System overview, Elements of Electrical Power System, per-unit System)
  2. Building One-Line Diagram Using ETAP . (Add Elements, Select & Deselect Elements, Element and Connector Colors, Relocate Elements, Cut, Copy, & Paste, Size, Symbol, & Orientation, Protective Devices, Nodes & Buses, Group & Ungroup, Composite Networks)
  3. Load Flow Calculation Methods. (Newton-Raphson, Fast-Decoupled, Gaus-Siedel)
  4. Load Flow Study Using ETAP. (Load Flow Toolbar, Load Flow Study Case Editor, Load Flow Display Options, Load Flow Calculation Methods, Load Flow Required Data, Load Flow Output Reports)
  5. Fault Calculation Methods. (Impedance Methode, Symetrical Component Methode)
  6. Short-Circuit Analysis. (Short-Circuit Toolbar, Short-Circuit Study Case Editor, Short-Circuit Display Options, Short-Circuit Required Data, Short-Circuit Output Reports)
  7. Motor Starting Analysis. (Motor Starting Methods, Motor Starting Calculation)
  8. Motor Starting Analysis Using ETAP. (Motor Starting Toolbar, Motor Starting Study Case Editor, Info Page, Model Page, Time Event Pages, Add Action by Starting Category, Add Action by Load, Motor Starting Display Options, Motor Starting Calculation Methods, Motor Starting Required Data, Motor Starting Output Reports, Motor Starting Time Slider Toolbar)
  9. Transient Stability Anaysis. (Purpose for Performing Transient Stability Study, Power System Stability Definition, Stability Limits)
  10. Transient Stability Anaysis Using ETAP. (Transient Stability Toolbar, Transient Stability Study Case Editor, Info Page, Events Page, Dyn Model Page, Transient Stability Plots, Transient Stability Required Data, Transient Stability Output Reports, Transient Stability Time Slider Toolbar)
  11. Harmonic Analysis. (Definition, Harmonic Parameters, Harmonic Sources)
  12. Harmonic Analysis Using ETAP. (Harmonic Analysis Toolbar, Harmonic Analysis Study Case Editor, Harmonic Analysis Display Options, Harmonic Analysis Calculation Methods, Harmonic Analysis Required Data, Harmonic Analysis Output Reports, Harmonic Analysis Order-Slider, Harmonic Analysis Frequency-Slider)

 

PESERTA TRAINING ETAP FOR ELECTRICAL POWER SYSTEM ANALYSIS

Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa sistem tenaga.

 

METODE TRAINING ETAP FOR ELECTRICAL POWER SYSTEM ANALYSIS

Presentasi, Diskusi , Brainstorming, Case Study,  Evaluasi

 

Waktu  Dan Tempat Training

  • Hotel Maxone, Bali
  • Hotel Nagoya Plaza, Batam
  • Hotel Fave, Balikpapan
  • Hotel Aston, Manado
  • Hotel Lombok Raya, Mataram
  • Hotel 101 Dago , Bandung
  • Hotel Mercure Grand Mirama, Surabaya
  • Hotel Ibis Senen , Jakarta
  • Hotel Ibis Solo
  • Hotel Ibis Simpang Lima, Semarang
  • Hotel Melia Purosani, Yogyakarta
  • 16 – 17 September 2019
  • 23 – 24 September 2019
  • 30 September – 01 Oktober 2019
  • 07 – 08 Oktober 2019
  • 14 – 15 Oktober 2019
  • 21 – 22 Oktober 2019
  • 28 – 29 Oktober 2019
  • 04 – 05 November 2019
  • 11 – 12 November 2019
  • 18 – 19 November 2019
  • 25 – 26 November 2019
  • 02 -03 Desember 2019
  • 09 – 10 Desember 2019
  • 16 – 17 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

INVESTASI & FASILITAS TRAINING

  • 8.400.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • 7.400.000 (Non Residential, Belum Terasuk Pajak PPn 10%)) untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.400.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk Lokasi Solo, Semarang atau YogyakartaQuota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB, Lunch, Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

INSTRUKTUR TRAINING

Tugino, ST.,MT dan Tim

 

ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
 

cforms contact form by delicious:days

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.