SAFETY RELIEF VALVE FUNDAMENTAL

Safety relief valve adalah aset utama di setiap proses di dalam pabrik terkait dengan operasi under pressure

Bandung | 25 – 28 Agustus 2020 | Rp 8.750.000/ peserta
Bandung | 14 – 17 September 2020 | Rp 8.750.000/ peserta
Bandung | 27 – 30 Oktober 2020 | Rp 8.750.000/ peserta

Jadwal Training 2020 Selanjutnya …

 

 

 

TRAINING OBJECTIVE 

Safety relief valve are key assets in any process plant that operates under pressure. Acting as a ‘last resort’, these fully mechanical devices are designed to operate if an over-pressure situation occurs. They therefore safeguard the plant and help guarantee production, but more importantly, protect the plant’s most valuable asset, its workforce

This comprehensive 4-days course is excellent both for the training of maintenance personnel as well as for the multi-craft training needs of process and manufacturing facilities. This course also will train participants on how to install tubing and piping systems, disassemble, clean, inspect, align, and reassemble a variety of piping and valves.

 

WHAT WILL YOU LEARN ABOUT?

  • Safety Valve Operation
  • Safety Valve Maintenance
  • Disassembly, Reassembly and Installation
  • Removing the Disc Assembly and Checking the Seat
  • Installing and Setting
  • Removing and Checking the Pilot Valve
  • Valve Seat Repairs

 

SAFETY RELIEF VALVE TRAINING OUTLINE 

  1. Pressure-Relieving Devices:
    • Introduction;
    • Relief-Valve;
    • Safety Valve;
    • Safety Relief Valve;
    • Rupture Disc;
    • Conventional Safety Relief Valve;
    • Types and Functions of Pressure Relieving Devices
  2. Relief-Valve and Safety-Valve:
    • Valve Operational;
    • Relief-Valve and Safety Valve Components;
    • Force within Relief-Valve;
    • Valve Body;
    • Nozzle and Flans;
    • Seating;
    • Seal;
    • Leakage;
    • Additional Components;
    • Lift Mechanism;
    • Choke;
    • Jacketed Bodies;
    • Maintenance
  3. Pilot-Operated Valve and Rupture Disc Performance:
    • Valve Operational;
    • Spring Operated Valve;
    • Lever Capacity;
    • Rupture Disc;
    • Relief-Valves;
    • fMaintenance
  4. Performance Evaluation:
    • Several Key Factors in Selection Process;
    • Conventional Valves;
    • Balanced Safety Relief Valve;
    • Pilot Operated Valve;
    • Rupture Disc;
    • Overpressure;
    • Failure Root Cause
  5. Sizing:
    • Introduction;
    • Viscose and Non-viscose Fluids;
    • Gas and Steam;
    • Calculations;
    • Removal Methods;
    • Flares;
    • Mounting;
    • Capacity
  6. Conversion for Safety Valves:
    • Installation and Operation Standard Procedures

 

WHO SHOULD ATTEND?

  • ØInstrumentation Engineers & Technicians
  • Design and Process Engineers
  • Operation Engineer
  • Asset Manager Team members
  • Maintenance Manager/ Superintendent & Supervisor
  • Everybody who are responsible for selecting, purchasing, or repairing safety relief valves.

 

TRAINING INSTRUCTOR

Dr.Ir. Sutanto Hadisupadmo.MT.,IPM is a lecturer at Physics Engineering Bandung Institute of Technology (ITB), and has been as a Head of Laboratory of Industrial Instrumentation at ITB. He is former Director of Instrumentation Center and Technical Services of ITB. His education started at Engineering Physics, Bandung Institute of Technology (ITB-1977), then at Diplome Universite in Energetique, Universite de Prepignan, France (1985), Magister Engineering in Instrumentation and Control (ITB) and Doctor (ITB). He has over 20 years of experience doing training, consulting work in instrumentation, measurement, safety and process control and Mr. Sutanto has trained many training/courses for many companies in Indonesia such as PT. TOTAL Indonesie, Pertamina, PT. Petrokimia Gresik, PT. Badak LNG, PT. Pupuk Iskandar Muda, PT. Pupuk Kaltim, PT. Jaya Ancol and many others. As professional he has handled many projects in Instrumentation Process, Tools Evaluation, Transmitter, General Evaluation of Instrumentation Specification, Commercial Building Power Audit, Maintenance Management Evaluation, etc. To get more advance information and knowledge he has participated in domestic and overseas training, seminar, workshop and conference as participant or speakers.

 

TRAINING VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll.

 

TRAINING DURATION

4 days

 

JADWAL TRAINING 2020

  1. 25 Agust 2020-28 Agust 2020
  2. 14 Sep 2020-17 Sep 2020
  3. 27 Okt 2020-30 Okt 2020
  4. 24 Nop 2020-27 Nop 2020
  5. 14 Des 2020-17 Des 2020

 

INVESTATION PRICE/ PERSON 

  1. Rp. 8.750.000/ person (full fare) or
  2. Rp. 8.500.000/ person (early bird, payment 1 week before training) or
  3. Rp. 8.250.000/ person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

SAFETY RELIEF VALVE: FUNDAMENTAL CONCEPTS, SIZING AND SELECTION

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training
  1. INFORMATION OPTIONS
  2. (required)
  3. (required)
  4. PERSONAL DATA
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. PRE REGISTRATION DATA (Tidak Mengikat)
  12. (required)
  13. MESSAGE FOR TRAINING PROVIDER
  14. Captcha
 

cforms contact form by delicious:days