Kursus Sucker Rod Pump mengajarkan keterampilan untuk mengoptimalkan operasi, analisis & pemecahan masalah sistem pompa batang

Bandung | 23 – 25 September 2020 | Rp 7.950.000/ peserta 
Bandung | 05 – 07 Oktober 2020 | Rp 7.950.000/ peserta
Bandung | 02 – 04 November 2020 | Rp 7.950.000/ peserta

Jadwal Training 2020 Selanjutnya …

 

 

SUCKER ROD PUMP TRAINING INTRODUCTION AND OBJECTIVE 

This course teaches the skills necessary to optimize the operation, analysis and trouble shooting of rod pumping systems. It covers rod-pumping equipments (SRP).

 

After completing this course, you will be able to:

• Use modern rod pump effectively to optimize rod pump systems.
• Design the rod pump systems; compare pumping units
• In-depth dynamometer card interpretation will enable you to diagnose and fix field problems.
• Maintain the motor equipment, belt
• Measure the level fluid, foaming and more
• Many field examples will be used for practice

 

SUCKER ROD PUMP TRAINING OUTLINE

1. Introduction

• Rod pumping advantages and disadvantages
• Pumping unit geometries and prime movers

2. Down hole Equipment

• Common and special pumps and their advantages and disadvantages
• Plungers, balls and seats, pump displacement and slippages; gas anchor design.

3. System Design

• Types and Problems
• Component Equipment, classification versus API
• Constant productivity index, Vogel, and Fetkovich IPR methods
• Guidelines for system design; tips for reducing torque and rod loading, and increasing system efficiency
• Counter Balance, check stress rod
• Pump Analysis (Walker and Agnew Method)

4. ROD Pump

• Types and dimension version API
• Coupling, Continuous sucker rod, design polo shed rod
• Paraffin Scrapers, Rod Pull out Force

5. Dynamometer Analysis

• Assembling
• Interpretation, test procedures
• Rod Load analysis, Torque Analysis and counter balance
• Conventional Unit of Torque counter

6. Failure Control

• Equipment Handling (Tension, Corrosion, fatigue
• Diagram, Continuous s Rod, Storage

7. Dynagraph Interference

• Gilbert, Gibb-Neely

8. Fishing

• Rod Lifting Method

9. Trouble shooting

 

TRAINING RECOMMENDED PARTICIPANTS

Reservoir Engineers, Petroleum Engineer, Gas Engineer production superintendents, foremen, field technicians, and service personnel who are involved with rod pumping systems.

 

TRAINING INSTRUCTOR

Dr.Ir. Sudjati Rachmat, DEA. and Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.  Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.  Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.  Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.

 

TRAINING VENUE 

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION 

3 hari

 

JADWAL TRAINING 2020

1. 23 Sep 2020-25 Sep 2020
2. 05 Okt 2020-07 Okt 2020
3. 02 Nop 2020-04 Nop 2020
4. 22 Des 2020-24 Des 2020

 

INVESTATION PRICE/PERSON

1. Rp 7.950.000/person (full fare) or
2. Rp 7.750.000/person (early bird, payment 1 week before training) or
3. Rp 7.500.000/person (if there are 3 persons or more from the same company)

 

SUCKER ROD PUMP TRAINING FACILITIES

1. Training Module
2. Flash Disk contains training material
3. Certificate
4. Stationeries: NoteBook and Ballpoint
5. T-Shirt
6. Backpack
7. Training Photo
8. Training room with Full AC facilities and multimedia
9. Lunch and twice coffeebreak every day of training
10. Qualified Instructor
11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

Sucker Rod Pump: Design, Operation and Troubleshooting

 

Formulir Permintaaan Informasi Lanjutan / Pra-Pendaftaran Public Training

1. INFORMATION OPTIONS
2. Judul Training(required)
3. Tanggal Training
4. Select a message type Registration Offering Letter (Permintaan Proposal Penawaran) Next Schedule Information (Jadwal selanjutnya) More Information (Informasi tambahan) Others (lain-lain) (required)
5. PERSONAL DATA
6. Your Name(required)
7. Job Title(required)
8. Company(required)
9. Company Address
10. Email(valid email required)
11. Mobile Phone(required)
12. Office Phone(required)
13. Extention No.
14. Facsimile (Fax)
15. Website
16. PRE REGISTRATION DATA (Tidak Mengikat)
17. Penanggung Jawab Training di Perusahaan
18. Email
19. Office Phone+Ext atau No. Handphone
20. Jumlah Peserta(required)
21. Nama-nama peserta
22. Payment Method Bank Transfers Submitting an Invoice Cheque or Cash on arrival ( If Possible)
23. MESSAGE FOR TRAINING PROVIDER
24. Pesan untuk penyelenggara Training
25. CC this registration / message to me
26. Isikan angka/huruf pada gambar

 

cforms contact form by delicious:days